Numerical Simulation of Flows in Cut-Throat Flumes
Publication: Journal of Irrigation and Drainage Engineering
Volume 134, Issue 6
Abstract
A numerical simulation is presented to obtain the flow characteristics of cut-throat flumes in rectangular open channels. Cut-throat flumes with a horizontal floor are used as simple devices for flow measurement in open channels. Since the flow in the throat section is highly three dimensional and curvilinear, the three-dimensional turbulence Reynolds stress model was applied in the present study to obtain the flow parameters such as the water surface profiles, the pressure distributions, and the mean velocity distributions. The volume of fluid scheme was used to determine the shape of the free surface by computing the fraction of each near-interface cell of a fixed grid that is partially filled with water. The previously published experimental data as well as data based on a new test related to cut-throat flumes were used to validate the simulation results.
Get full access to this article
View all available purchase options and get full access to this article.
References
Aukle, D. A. (1983). “Free flow discharge characteristics of throatless flumes.” MEng thesis, Concordia Univ., Montréal.
Ferziger, J. H., and Peric, M. (2002). Computational method for fluid dynamics, 3rd Ed., Springer, Berlin.
Issa, R. I. (1986). “Solution of the implicitly discretised fluid flow equations by operator-splitting.” J. Comput. Phys., 62, 40–65.
Keller, R. J. (1981). “Scale effect in model studies of cut-throat flumes.” Proc., 14th Int. Assoc. of Hydraulic Research Congress, New Delhi, India, Vol. 4, 40–47.
Keller, R. J. (1984). “Cut-throat flume characteristics.” J. Hydraul. Eng., 110(9), 1248–1263.
Keller, R. J., and Mabbett, G. O. (1987). “Model calibration of a prototype cut-throat flume.” J. Hydraul. Res., 25(3), 329–339.
Launder, B. E., and Li, S. P. (1994). “On the elimination of wall-topography parameters from second-moment closure.” Phys. Fluids, 6(2), 999–1006.
Launder, B. E., and Spalding, D. B. (1974). “The numerical computation of turbulent flows.” Comput. Methods Appl. Mech. Eng., 3, 269–289.
Ramamurthy, A. S., Rao, V. J., and Aukle, D. A. (1985). “Free flow discharge characteristics of throatless flumes.” J. Irrig. Drain. Eng., 111(1), 65–75.
Ramamurthy, A. S., Vo, N. D., and Balachandar, R. (1988). “Submerged flow characteristics of throatless flume.” J. Irrig. Drain. Eng., 114(1), 185–194.
Skogerboe, G. V., and Hyatt, M. L. (1967). “Rectangular cutthroat flow measuring flumes.” J. Irrig. and Drain. Div., 93(4), 1–13.
Wilcox, D. C. (2007). Turbulence modeling for CFD, 3rd Ed., DCW Industries, Inc., La Canada, Calif.
Information & Authors
Information
Published In
Copyright
© 2008 ASCE.
History
Received: May 20, 2007
Accepted: Feb 29, 2008
Published online: Dec 1, 2008
Published in print: Dec 2008
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.