Automation of a Center Pivot Using the Temperature-Time-Threshold Method of Irrigation Scheduling
Publication: Journal of Irrigation and Drainage Engineering
Volume 134, Issue 3
Abstract
A center pivot was completely automated using the temperature-time-threshold method of irrigation scheduling. An array of infrared thermometers was mounted on the center pivot, and these were used to remotely determine the crop leaf temperature as an indicator of crop water stress. We describe methods used to automatically collect and analyze the canopy temperature data and control the moving irrigation system based on the data analysis. Automatic irrigation treatments were compared with manually scheduled irrigation treatments under the same center pivot during the growing seasons of 2004 and 2005. Manual irrigations were scheduled on a weekly basis using the neutron probe to determine the profile water content and the amount of water needed to replenish the profile to field capacity. In both years, there was no significant difference between manual and automatic treatments in soybean water use efficiency or irrigation water use efficiency. The automatic irrigation system has the potential to simplify management, while maintaining the yields of intensely managed irrigation.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
Mention of trade names or commercial products in this paper is solely for the purpose of providing specific information and does not imply recommendation or endorsement by the U.S. Department of Agriculture.
References
Burke, J. J. (1993). “Thermal kinetic windows of plant enzymes.” Proc., Int. Symp. on Biotechnology for Aridland Plants. T. J. Mabry, H. T. Nguyen, R. A. Dixon, and M. S. Bonness, eds., IC Institute, 73–82.
Burke, J. J., and Oliver, M. J. (1993). “Optimal thermal environments for plant metabolic processes (Cucumis sativus L.): Light-harvesting chlorophyll a/b pigment-protein complex of photosystem II and seedling establishment in cucumber.” Plant Physiol., 102(1), 295–302.
Eck, H. V., Mathers, A. C., and Musick, J. T. (1987). “Plant water stress at various growth stages and growth and yield of soybeans.” Field Crops Res., 17, 1–16.
Evett, S. R., Howell, T. A., Schneider, A. D., Upchurch, D. R., and Wanjura, D. F. (1996). “Canopy temperature based automatic irrigation control.” Proc., Int. Conf. on Evapotranspiration and Irrigation Scheduling, C. R. Camp, E. J. Sadler, and R. E. Yoder, eds., 207–213.
Evett, S. R., Howell, T. A., Schneider, A. D., Upchurch, D. R., and Wanjura, D. F. (2000). “Automatic drip irrigation of corn and soybean.” Proc., 4th Decennial National Irrigation Symp., R. G. Evans, B. L. Benham, and T. P. Trooien eds., ASABE, 401–408.
Evett, S. R., and Lascano, R. J. (1993). “ENWATBAL.BAS: A mechanistic evapotranspiration model written in compiled BASIC.” Agron. J., 85(3), 763–772.
Evett, S. R., and Steiner, J. L. (1995). “Precision of neutron scattering and capacitance type soil water content gauges from field calibration.” Soil Sci. Soc. Am. J., 59(4), 961–968.
Evett, S. R., Tolk, J. A., and Howell, T. A. (2003). “A depth control stand for improved accuracy with the neutron probe.” Vadose Zone J., 2, 642–649.
Peters, R. T., and Evett, S. R. (2004a). “Comparison of scaled canopy temperatures with measured results under center pivot irrigation.” Proc., 25th Annual Int. Irrigation Show of the Irrigation Association (CD-ROM).
Peters, R. T., and Evett, S. R. (2004b). “Modeling diurnal canopy temperature dynamics using one time-of-day measurement and a reference temperature curve.” Agron. J., 96, 1553–1561.
Peters, R. T., and Evett, S. R. (2005). “Using low-cost GPS receivers for determining field position of mechanized irrigation systems.” Appl. Eng. Agric., 21(5), 841–845.
Wanjura, D. F., Upchurch, D. R., and Mahan, J. R. (1992). “Automated irrigation based on threshold canopy temperature.” Trans. ASAE, 35(1), 153–159.
Wanjura, D. F., Upchurch, D. R., and Mahan, J. R. (1995). “Control of irrigation scheduling using temperature-time thresholds.” Trans. ASAE, 38(2), 403–409.
Information & Authors
Information
Published In
Copyright
© 2008 ASCE.
History
Received: Feb 27, 2007
Accepted: Aug 31, 2007
Published online: Jun 1, 2008
Published in print: Jun 2008
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.