Electric Motor Efficiency under Variable Frequencies and Loads
Publication: Journal of Irrigation and Drainage Engineering
Volume 134, Issue 2
Abstract
This paper details a study performed by the Irrigation Training and Research Center to determine motor performances under varying speeds [induced by a variable frequency drives (VFD) controller] and loads. A further goal of the study was to provide sufficient information to designers so that they could estimate total pumping plant power usage with a VFD-controlled installation. Motors were tested with a VFD as well as across-the-line. On average, the relative efficiency of the electrical system with a VFD may be approximately 8% lower than the relative efficiency of a properly designed, full-load across-the-line system. If one considers actual field operating conditions this 8% is misleading because overall energy savings can be obtained with VFDs due to their ability to properly adjust speeds to meet actual field conditions.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
Funding for this project was provided by the California State University Agricultural Research Initiative Project No. 05-3-009. Funding was also provided by the California Energy Commission Public Interest Electric Research (PIER) Program, Agreement No. 400-99-014, and the U.S. Bureau of Reclamation Grant No. 04FG210013. Donations were received from Emerson Motor Company (75, 50, and 20 hp premium efficiency motors), Thoma Electric of San Luis Obispo (technical assistance for the electrical installation), Pacific Gas and Electric Co. (pressure gauges), and Branom Instrument Co. of Sacramento (Danfoss VFD controller).
References
Burt, C. M., Howes, D. J., and Wilson, G. (2003). “California agricultural water electrical energy requirements.” ITRC Rep. No. R 03–006,Prepared for the Public Interest Electric Research Program of the California Energy Commission, Irrigation Training and Research Center. California Polytechnic State Univ., San Luis Obispo, Calif., ⟨http://www.itrc.org/reports/energyreq/energyreq.pdf⟩ (Apr. 1, 2007).
Burt, C. M., and Piao, X. (2002). “Advances in PLC-based canal automation.” Proc., U.S. Committee on Irrigation and Drainage Conference on Energy, Climate Environment and Water—Issues and Opportunities for Irrigation and Drainage, 409–422.
Department of Energy (DOE). (2005). “ (Version 4) software.” ⟨http://www1.eere.energy.gov/industry/bestpractices/software.html#mm⟩ (Apr. 1, 2007).
Douglass, J. (2005). “Induction motor efficiency standards.” Washington State Univ. Extension Energy Program No. WSUEEP02_029.
Industrial Assessment Center (IAC). (2006). “Electric Motor Systems.” Center for Energy Efficiency and Renewable Energy, Univ. of Massachusetts, Amherst, ⟨http://www.ceere.org/iac/assessment%20tool/ARC2410.html#efftable⟩ (Apr. 1, 2007).
Irrigation Training and Research Center (ITRC). (2002). “Variable frequency drives and SCADA—Are they worthwhile investments?” ITRC Rep. No. R 02–006, California Polytechnic State Univ., San Luis Obispo, Calif., ⟨http://www.itrc.org/reports/vfd/vfdandscada.pdf⟩ (Apr. 1, 2007).
Motor Decisions Matter. (2005). “Efficiency values used to estimate annual energy savings.” (Spreadsheet). 1–2-3 Approach to Motor Management. ⟨http://www.motorsmatter.org/savings-chart.xls⟩ (Apr. 1, 2007).
Nailen, R. L. (2002). “Just how important is drive motor efficiency?” Electrical apparatus, Barker Publications, Inc., Chicago, 32.
Natural Resources Canada. (2004). “Office of Energy Efficiency technical fact sheet—Premium-efficiency motors.” Catalog No. M144–21/2003E, Office of Energy Efficiency, Energy Innovators Initiative, Ottawa.
Rishel, J. B. (2003). “How to calculate motor efficiency for variable speed centrifugal pumps.” Engineered systems, August.
Rooks, J. A., and Wallace, A. K. (2003). “Energy efficiency of variable speed drive systems.” Conf. Record of the 2003 Annual Pulp and Paper Industry, Technical Conf., 160–163.
Wallace, A. K., Rooks, J. A., and Holmquist, J. R. (2002). “Comparison testing of IEEE standard 841 motors.” IEEE Trans. Ind. Appl., 38(3), 763–768.
Wallbom-Carlson, A. (1998). “Energy comparison. VFD vs. on-off controlled pumping stations.” Scientific impeller, ITT Flygt AB, Sweden, 29–32.
Information & Authors
Information
Published In
Copyright
© 2008 ASCE.
History
Received: Dec 2, 2006
Accepted: May 15, 2007
Published online: Apr 1, 2008
Published in print: Apr 2008
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.