Coupled Crop and Solid Set Sprinkler Simulation Model. I: Model Development
This article has a reply.
VIEW THE REPLYPublication: Journal of Irrigation and Drainage Engineering
Volume 130, Issue 6
Abstract
The development of a coupled crop model (Ador-Crop) and solid set sprinkler irrigation model (Ador-Sprinkler) is reported in this work. The crop model incorporates many of the features developed in the well-known CropWat model. Improvements include the use of thermal time and the input of daily . The solid set sprinkler model applies ballistic theory to determine water distribution resulting from water droplets subjected to a wind vector. Regarding the validation of the coupled model (AdorSim), the plot of soil available water versus measured and simulated yield reduction resulted in similar features. AdorSim explained 25% of the variability in measured yield reduction. Most of the unexplained variability is due to the effect of nonwater-related factors affecting crop yield. In a companion paper, AdorSim is used to investigate optimum water management options in the middle Ebro basin in the NE of Spain.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Allen, R. G., Pereira, L. S., Raes, D., and Smith, M. ( 1998). “Crop evapotranspiration: Guidelines for computing crop water requirements.” FAO irrigation and drainage paper 56, Rome, Italy.
2.
Brisson, N., and Mary, B. ( 1999). “STICS version 4.0. Modèle de simulation de culture, bilan hydrique et bilan azoté.” Notice concepts et formalismes (in French).
3.
Cabelguenne, M. ( 1996). “Tactical irrigation management using real time EPIC-phase model and weather forecast: Experiment on maize.” Irrigation scheduling from theory to practice (Water Reports), FAO, Rome, 185–193.
4.
Carrión, P., Tarjuelo, J. M., and Montero, J. (2001). “SIRIAS: A simulation model for sprinkler irrigation. I. Description of the model.” Irrig. Sci., 20, 73–84.
5.
Cavero, J., Farré, I., Debaeke, P., and Faci, J. M. (2000). “Simulation of maize yield under water stress with the EPICphase and CROPWAT models.” Agron. J., 92(4), 679–690.
6.
Cavero, J., Playán, E., Zapata, N., and Faci, J. M. (2001). “Simulation of maize grain yield variability within a surface-irrigated field.” Agron. J., 93(4), 773–782.
7.
Christiansen, J. E. ( 1942). “Irrigation by Sprinkling.” Agricultural Experimental Station Bulletin 670, Univ. of California at Berkeley, Berkeley, Calif.
8.
Clarke, D., Smith, M., and El Askari, K. ( 1998). CropWat for Windows: User guide, FAO, Rome.
9.
Dechmi, F., Playán, E., Cavero, J., Faci, J. M., and Martínez-Cob, A. (2003). “Wind effects on solid set sprinkler irrigation depth and corn yield.” Irrig. Sci., 22, 67–77.
10.
de Juan, J. A., Tarjuelo, J. M., Valiente, M., and García, P. (1996). “Model for optimal cropping patterns within the farm based on crop water production functions and irrigation uniformity. I: Development of a decision model.” Agric. Water Manage., 31, 115–143.
11.
Doorenbos, J., and Kassam, A. H. ( 1979). “Efectos del agua sobre el rendimiento de los cultivos.” Food and Agriculture Organisation of the United Nations, Irrigation and drainage Paper 33, Rome, Italy (in Spanish).
12.
Faci, J., and Bercero, A. (1991). “Efecto del viento en la uniformidad y en las pérdidas por evaporación y arrastre en el riego por aspersión.” Invest. Agrar., Prod. Prot. Veg., 6(2), 171–182 (in Spanish).
13.
Fukui, Y., Nakanishi. K., and Okamura, S. (1980). “Computer evaluation of sprinkler irrigation uniformity.” Irrig. Sci., 2, 23–32.
14.
Gallagher, J. N. (1979). “Field studies of cereal leaf growth.” J. Exp. Bot., 30(117), 625–636.
15.
Hills, D., and Gu, Y. (1989). “Sprinkler volume mean droplet diameter as a function of pressure.” Trans. ASAE, 32, 471–476.
16.
Jones, C.A., and Kiniry, J.R. ( 1986). CERES-maize: A simulation model of maize growth and development, Texas A&M University Press, College Station, Tex.
17.
Kincaid, D. C., Solomon, K. H., and Oliphant, J. C. (1996). “Drop size distributions for irrigation sprinklers.” Trans. ASAE, 39(3), 839–845.
18.
Li, J. (1998). “Modeling crop yield as affected by uniformity of sprinkler irrigation system.” Agric. Water Manage., 38, 135–146.
19.
Li, J., Kawano, H., and Yu, K. (1994). “Droplet size distributions from different shaped sprinkler nozzles.” Trans. ASAE, 37(6), 1871–1878.
20.
Mantovani, E. C., Villalobos, F. J., Orgaz, F., and Fereres, E. (1995). “Modeling the effects of sprinkler irrigation uniformity on crop yield.” Agric. Water Manage., 27, 243–257.
21.
Merriam, J.L., Sheare, M.N., and Burt, C.M. ( 1980). “Evaluating irrigation systems and practices.” Design and operation of farm irrigation systems, M. E. Jensen, ed., ASAE, St. Joseph, Mich., 721–776.
22.
Montero, J. ( 1999). “Análisis de la distribución de agua en sistemas de riego por aspersión estacionario. Desarrollo del modelo de simulación de riego por aspersión (SIRIAS).” doctoral Thesis, Univ. de Castilla-la Mancha, Albacete, Spain (in Spanish).
23.
Montero, J., Tarjuelo, J. M., and Carrión, P. (2001). “SIRIAS: a simulation model for sprinkler irrigation. II. Calibration and validation of the model.” Irrig. Sci., 20, 85–98.
24.
Or, D., and Hanks, R. J. (1992). “Soil water and crop yield spatial variability induced by irrigation nonuniformity.” Soil Sci. Soc. Am. J., 56, 226–233.
25.
Press, W.H., Flannery, B.P., Teukolsky, S.A., and Vetterling, W.T. ( 1988). Numerical recipes in C, Cambridge University Press, Cambridge, U.K.
26.
Seginer, I., Kantz, D., and Nir D. (1991). “The distortion by wind of the distribution patterns of single sprinklers.” Agric. Water Manage., 19, 314–359.
27.
Smith, M. ( 1993). “CropWat. Programa de ordenador para planificar y manejar el riego.” Estudio FAO riego y drenaje n° 46 (in Spanish).
28.
Smith, M., et al. ( 1996). “Irrigation scheduling: From theory to practice.” FAO Water Rep. 8, ICID and FAO, Rome.
29.
Solomon, K.H. ( 1983). “Irrigation uniformity and yield theory.” PhD thesis, Agricultural and Irrigation Engineering Dept., Utah State Univ., Logan, Utah.
30.
Stern, J., and Bresler, E. (1983). “Nonuniform sprinkler irrigation and crop yield.” Irrig. Sci., 4, 17–29.
31.
Stewart, J. I., et al. ( 1977). “Optimizing crop production through control of water and salinity levels.” Utah Water Research Laboratory PRWG 151-1.
32.
Stockle, C. O., Martín, S. A., and Campbell, G. S. (1994). “CropSyst, a cropping systems simulation model: water/nitrogen budgets and crop yield.” Agric. Syst., 46, 335–359.
33.
Tarjuelo, J. M., Carrión, P., and Valiente, M. (1994). “Simulación de la distribución del riego por aspersión en condiciones de viento.” Invest. Agrar., Prod. Prot. Veg., 9(2), 255–272 (in Spanish).
34.
Tarjuelo, J. M., Valiente, M., and Lozoya, J. (1992). “Working conditions of sprinkler to optimize application of water.” J. Irrig. Drain. Eng., 118(6), 895–913.
35.
Von Bernuth, R. D. (1988). “Effect of trajectory angle on performance of sprinklers in wind.” J. Irrig. Drain. Eng., 114(4), 579–587.
36.
Von Bernuth, R. D., and Gilley, J. R. (1984). “Sprinkler droplet size distribution estimation from single leg data.” Trans. ASAE, 27(5), 1435–1441.
37.
Vories, E. D., Von Bernuth, R. D., and Mickelson, R. H. (1987). “Simulating sprinkler performance in wind.” J. Irrig. Drain. Eng., 113(1), 119–130.
38.
Warrick, A. W., and Gardner, W. R. (1993). “Crop yield as affected by special variations of soil and irrigation.” Water Resour. Res., 19, 181–186.
39.
Williams, J. R., Jones, C. A., and Dyke, P. T. (1984). “A modeling approach to determining the relationship between erosion and soil productivity.” Trans. ASAE, 27, 129–144.
Information & Authors
Information
Published In
Copyright
Copyright © ASCE.
History
Published online: Nov 15, 2004
Published in print: Dec 2004
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.