Cost-Effective Temporary Microirrigation System for Grass Establishment on Environmentally Sensitive Steep Slopes
Publication: Journal of Irrigation and Drainage Engineering
Volume 130, Issue 3
Abstract
An advanced technology cost-effective drip irrigation system design and setup on environmentally sensitive elevated steep slopes (batters) of a coal train derailment site in Central Queensland, Australia, are presented. The final profile of the coal burial site consists of six batters and associated berms with a drop in elevation of about 35 m. A small dam constructed downstream of the confluence of the two main drainage channels at the site supplied water for irrigation of the batters to aid the establishment of grass to control erosion. Water was periodically pumped from the small dam to three storage tanks using a petrol (gas) pump. Three solar pumps drew water from the storage tanks and dam to irrigate the top four batters. Contactors, pressure switches and irrigation control valves in turn shared a single solar power source between the solar pumps. Level balls (floating switches) placed in the storage tanks cut the solar power supply to the pumps when the storage tanks were nearly empty. On the whole, the irrigation system worked very well and excellent grass cover was established within 12 weeks. Given the environmental risks associated with the on-site burying of coal, and the estimated cost of about AU$11.73/m2 (every 10 years) in maintenance if the railway batters are not treated, the estimated total cost of AU$4.61/m2 of batter area treated with irrigation, including AU$3.08/m2 in irrigation cost, is justified.
Get full access to this article
View all available purchase options and get full access to this article.
References
Australian Standard AS1726. (1993). Geotechnical site investigations, Standards Australia, Homebush, New South Wales, Australia.
Chadwick, A., and Morfett, J. (1998). Hydraulics in civil and environmental engineering, Spon, London.
Gutteridge, Haskins, and Davey. (2002). “Black Mountain coal disposal—Environmental risk assessment.” Gutteridge, Haskins and Davey Pty. Ltd., consulting report.
Gyasi-Agyei, Y. (2001). “Mitigation of hydrology and erosion problems, and fire risks, within Central Queensland railway system, HEFRAIL Project, Part I: Plot scale field trial.” Res. Rep. No. CRE R 69 HEFRAIL-1/2001, Central Queensland Univ., Rockhampton, Australia.
Gyasi-Agyei, Y.(2003). “Pond water source for irrigation on steep slopes.” J. Irrig. Drain. Eng., 129(3), 184–193.
Gyasi-Agyei, Y.(2004). “Optimum use of biodegradable erosion control blankets and waste ballast (rock) mulch to aid grass establishment on railway embankment steep slopes.” J. Hydrologic Eng., 9(2), 150–159.
Gyasi-Agyei, Y., and McSweeney, T. (2002). “Mitigation of hydrology and erosion problems, and fire risks, within Central Queensland railway system (HEFRAIL Project), Part II: Riverside large scale field trials.” Res. Rep. No. CRE R 79 HEFRAIL-2/2002, Central Queensland Univ., Rockhampton, Australia.
Gyasi-Agyei, Y., Sibley, J., and Ashwath, N.(2001). “Quantitative evaluation of strategies for erosion control on a railway embankment batter.” Hydrolog. Process., 15, 3249–3268.
Gyasi-Agyei, Y., Kayes, I., Nissen, D., and Langford, P. (2002). “Cost-effective strategies for railway batter erosion control.” Proc., Conf. on Railway Engineering CORE2002, Railway Technical Soc. of Australasia, Kingston, Australia, 121–130.
Gyasi-Agyei, Y., Sibley, J., Truong, P., and Nissen, D. (2000). “A catchment-based approach to the mitigation of erosion problems in a railway cutting.” Proc., Conf. on Railway Engineering CORE2000, Railway Technical Soc. of Australasia, Kingston, Australia.
McMahon, T. A. (1993). “Hydrologic design for water use.” Handbook of hydrology, D. R. Maidment, ed., McGraw–Hill, New York, 27.11–27.12.
Pedras, C. M. G., and Pereira, L. S.(2001). “A simulation model for design and evaluation of microirrigation systems.” Irrig. Drain., 50(4), 323–334.
Queensland Department of Minerals and Energy. (1995). “Technical guidelines for the environmental management of exploration and mining in Queensland.” Queensland Dept. of Minerals and Energy, Brisbane, Australia.
Singh, V. P. (1988). Hydrologic systems, Vol. 1, Prentice–Hall, Englewood Cliffs, N.J.
Smakhtin, Y. V., and Masse, B.(2000). “Continuous daily hydrograph simulation using duration curves of a precipitation index.” Hydrolog. Process., 14, 1083–1100.
Valiantzas, J. D.(1998). “Analytical approach for direct drip lateral hydraulic calculation.” J. Irrig. Drain. Eng., 124(6), 300–305.
Vallesquino, P., and Luque-Escamilla, P. L.(2002). “Equivalent friction factor method for hydraulic calculation in irrigation laterals.” J. Irrig. Drain. Eng., 128(5), 278–286.
Witheridge, G., and Walker, R. (1996). “Soil erosion and sediment control, Engineering guidelines for Queensland construction sites.” The Institution of Engineers Australia, Queensland Division, Brisbane, Australia.
Yu, P.-S., and Yang, T.-C.(2000). “Using synthetic flow duration curves for rainfall-runoff model calibration at ungauged sites.” Hydrolog. Process., 14, 117–133.
Information & Authors
Information
Published In
Copyright
Copyright © 2004 American Society of Civil Engineers.
History
Received: Jan 13, 2003
Accepted: Sep 3, 2003
Published online: May 14, 2004
Published in print: Jun 2004
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.