Explicit Hydraulic Design of Microirrigation Submain Units with Tapered Manifold and Laterals
This article has a reply.
VIEW THE REPLYThis article has a reply.
VIEW THE REPLYPublication: Journal of Irrigation and Drainage Engineering
Volume 129, Issue 4
Abstract
The optimum hydraulic design problem for microirrigation submain units of specified dimensions is solved analytically. New algebraic equations were derived to calculate explicitly the optimum values of the design variables. The design variables are the lengths of two given pipe sizes for the laterals as well as the appropriate lengths of the available pipe sizes for the manifold. Tapered laterals and manifold are selected in such a way that the sum of the costs of the laterals and the manifold is minimized, while the hydraulic design criterion is ensured. The case of a single-diameter lateral with tapered manifold pipeline is also examined. The design procedure can be also applied in sprinkle irrigation tapered laterals. The explicit optimum design solution is demonstrated in two cases studied.
Get full access to this article
View all available purchase options and get full access to this article.
References
American Society of Agricultural Engineers (ASAE). (1998). “Design and installation of microirrigation systems.” American Society of Agricultural Engineers, St Joseph, Mich.
Bralts, V. F., Kelly, S. F., Shayya, W. H., and Segerlind, L. J.(1993).“Finite element analysis of microirrigation hydraulics using a virtual emitter system.” Trans. ASAE, 36(3), 717–725.
Bralts, V. F., and Segerlind, L. J.(1985). “Finite element analysis of drip irrigation submain units.” Trans. ASAE, 28(3), 809–814.
Kang, V., and Nishiyama, S.(1996a). “Analysis and design of microirrigation laterals.” J. Irrig. Drain. Eng., 122(2), 75–82.
Kang, V., and Nishiyama, S.(1996b). “Design of microirrigation submain units.” J. Irrig. Drain. Eng., 122(2), 83–89.
Keller, J., and Bliesner, R. D. (1990). Sprinkle and trickle irrigation, Van Nostrand Reinhold, New York.
Pitts, D. J., Ferguson, J. A., and Wright, R. E.(1986). “Trickle irrigation lateral line design by computer analysis.” Trans. ASAE, 1320–1324.
Pleban, S., Shacham, D., and Loftis, J.(1984). “Minimizing capital cost of multi-outlet pipelines.” J. Irrig. Drain. Eng., 110(2), 165–178.
Solomon, K., and Keller, J.(1978). “Trickle irrigation uniformity and efficiency.” J. Irrig. Drain. Div., 104(3), 293–306.
Valiantzas, J. D.(1998). “Analytical approach for direct drip lateral hydraulic calculation.” J. Irrig. Drain. Eng., 124(6), 300–305.
Valiantzas, J. D.(2002a). “Continuous outflow variation along irrigation laterals: Effect of the number of outlets.” J. Irrig. Drain. Eng., 128(1), 34–42.
Valiantzas, J. D.(2002b). “Hydraulic analysis and optimum design of multidiameter irrigation laterals.” J. Irrig. Drain. Eng., 128(2), 78–86.
Wu, I. P.(1992). “Energy gradient line approach for direct hydraulic calculation in drip irrigation design.” Irrig. Sci., 13, 21–29.
Wu, I. P.(1997). “An assessment of hydraulic design of microirrigation systems.” Agric. Water Manage., 32, 275–284.
Wu, I. P., and Gitlin, H. M.(1975). “Energy gradient line for drip irrigation laterals.” J. Irrig. Drain. Div., 101(4), 323–326.
Information & Authors
Information
Published In
Copyright
Copyright © 2003 American Society of Civil Engineers.
History
Received: Dec 11, 2001
Accepted: Nov 6, 2002
Published online: Jul 15, 2003
Published in print: Aug 2003
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.