Furrow Irrigation Model for Real‐Time Applications on Cracking Soils
Publication: Journal of Irrigation and Drainage Engineering
Volume 119, Issue 5
Abstract
Clay soils frequently develop large cracks after irrigation. Infiltration equations therefore need to be modified to take cracking soil properties into account when modeling and optimizing furrow irrigation. In this article, we propose an infiltration equation for cracked soils, based on two parameters. Other parameters of the global model are assumed to be known (furrow length, shape, slope, and estimated roughness). One parameter is linked to the type of soil and is calibrated separately for the entire irrigation process. The second parameter takes soils' cracks into account and is calibrated in real time during the advance phase (before the water front overruns the middle of the plot). This global furrow irrigation model for cracked soils is derived from a conceptual approach and can be used either to predict in real time, water‐use efficiency during irrigation (infiltrated volume, runoff water losses, uniformity) or to optimize irrigation parameters (head flow, irrigation duration). The model was tested and validated on three irrigation applications on 60 furrows in a corn field in Tarascon in southeastern France. This conceptual model can be easily adapted to the statistical approach, which is based on the variability of water advance between the furrows.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Berthomé, P. (1991). “Modélisation de l'infiltration en irrigation à la raie—Résolutions numérique et analytique—Application à l'étude de la conduite des arrosages,” PhD thesis, Institut National Polytechnique de Toulouse, France.
2.
De Souza, F. (1981). “Non linear hydrodynamic model of furrow irrigation,” PhD thesis, University of California, Davis, Calif.
3.
Elliott, R. L., and Walker, W. R. (1982). “Field evaluation of furrow irrigation and advance functions.” Trans. ASAE, 25(6), 396–400.
4.
Fang, X. Y. U., and Vijay, P. S. (1990). “Analytical model for furrow irrigation.” J. Irrig. and Drain. Engrg., ASCE, 116(2), 154–170.
5.
Haverkamp, R., Kutilek, M., Parlange, J. Y., Rendon, L., and Krejca, M. (1988). “Infiltration under ponded conditions: 2 infiltration equations tested for parameter time‐dependance and predictive use.” Soil Sci. Soc. Am. J., 145(5), 327–329.
6.
Horton, R. E. (1940). “An approach towards a physical interpretation of infiltration capacity.” Soil Sci. Sol. Am. J., 5, 399–417.
7.
Kostiakov, A. N. (1932). “On the dynamics of the coefficient of water percolation in soils and the necessity for studying it from a dynamic point of view for purposes of amelioration.” Trans. Sixth Com. Intern. Sol Soil Sciences, Russian part A, 17‐2 (in Russian).
8.
Lewis, M. K. (1937). “The rate of infiltration of water in irrigation practice.” Trans. Am. Geophys. Union 18th Annual Meeting, 34–47.
9.
Lewis, M. K., and Milne, W. E. (1938). “Analyses of border irrigation.” Agric. Eng., 19(6), 267–272.
10.
Mailhol, J. C., Girousse, J. C., and Rakotoarisoa, A. (1988). “Essai de prédétermination de la qualité hydraulique d'un arrosage: Application aux raies courtes.” C.I.G.R. Intersection Symposium, Sep. 5–10, Ilorin, Nigeria, 403–410.
11.
Parlange, J. Y., Lisle, I., and Braddock, R. D. (1982). “The three parameters infiltration equation.” Soil Sci. Soc. Am. J., 133(6), 337–341.
12.
Philip, J. R. (1954). “An infiltration equation with physical significance.” Soil Sci. Soc. Am. J., 77(2), 153–157.
13.
Philip, J. R., and Farrell, D. N. (1964). “General solution of the infiltration advance problem in irrigation hydraulics.” J. Geophysical Res., 69(4), 621–631.
14.
Renault, D., and Wallender, W. W. (1991). “‘Alive’ advance linear velocity: Horton infiltration law from field water advance rate.” American Society of Agricultural Engineers, June.
15.
Schmitz, G. H., and Seus, G. J. (1992). “Mathematical zero‐inertia modeling of surface irrigation: Advance in furrows.” J. Irrig. and Drain. Engrg., ASCE, 118(2), 1–18.
16.
Singh, V. P., and Ram, R. S. (1983). “A kinematic model for surface irrigation. Verification by experimental data.” Water Resour. Res., 19(6), 1519–1612.
17.
Tabuada, M. N. (1989). “Modelacçao bidimensional e tridimensional da rega por sulcos,” PhD thesis, Universidad Technica de Lisboa.
18.
Trout, T. J. (1990). “Furrow inflow and variability impacts on irrigation management.” Trans. ASAE, 33(4), 1171–1178.
19.
Turbak, A., Morel‐Seytoux, H. J. (1988). “Analytical solutions of surface irrigation. I: Constant infiltration rate.” J. Irrig. and Drain. Engrg., ASCE, 118(2), 31–47.
20.
Van der Tak, L. D., and Grismer, M. E. (1987). “Irrigation, drainage and soil salinity in cracking soils.” Irrigation Engineering Transactions of ASAE.
21.
Walker, W. R., and Humpherys, A. S. (1983). “Kinematic wave furrow irrigation model.” J. Irrig. and Drain. Engrg., 109(4), 377–392.
22.
Wallender, W. W. (1987). “Furrow model with spatially varying infiltration.” Trans. ASAE, 29(4), 1012–1016.
Information & Authors
Information
Published In
Copyright
Copyright © 1993 American Society of Civil Engineers.
History
Received: Oct 10, 1991
Published online: Sep 1, 1993
Published in print: Sep 1993
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.