Hydraulics of Irrigation Laterals: Comparative Analysis
Publication: Journal of Irrigation and Drainage Engineering
Volume 119, Issue 1
Abstract
A differential approach is applied to multiple outlet pipes with constant and continuously variable outflow. This approach simulates pressure distributions along uniform sprinkle and trickle irrigation laterals and manifolds, as well as gated pipes. The effect of ground slope and velocity head on the pipeline hydraulics were considered. An alternate simplified procedure that neglects velocity head effects and assumes that the lateral is laid on level ground is also included. Several mathematical relations are derived for computing maximum, minimum, and average pressure heads and their locations of occurrence along a lateral. The hydraulics of the common types of manually and mechanically moving sprinkler irrigation systems such as wheel line, linear move, and center‐pivot systems are considered in the present analysis. When compared to pressures and locations of occurrence computed using a discretized, stepwise computation procedure, values computed using the developed equations are generally within 3% for maximum, minimum, and average pressures, and are generally within 5% for the locations of occurrence. The proposed equations are useful when applied for design and evaluation purposes.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Abramowitz, M., and Stegun, I. A. (1972). Handbook of mathematical functions. 9th Ed., Dover Publications, Inc., New York, N.Y.
2.
Allen, R. G. (1989). Sprinkle irrigation design: course notes. Dept. Agric. and Irrig. Engrg., Utah State Univ., Logan, UT.
3.
Buttermore, G. W., and Eisenhauer, D. E. (1989). “Calculation of chemical flushing times in center pivot irrigation systems.” Trans. Amer. Soc. Agric. Engrs., 32(4), 1193–1196.
4.
Christiansen, J. E. (1942). “Irrigation by sprinklers.” Bull. 670. Univ. of California. Berkeley, Calif.
5.
Chu, S. T., and Moe, D. L. (1972). “Hydraulics of a center pivot system.” Trans. Amer. Soc. Agric. Engrs., 15(5), 894–896.
6.
Churchill, S. W. (1977). “Friction‐factor equation spans all fluid‐flow regimes.” Chem. Engrg., 84(24), 91–92.
7.
Gilley, J. R. (1989). Discussion of “Friction correction factor for center‐pivot irrigation systems,” by Mohan Reddy and Horatio Apolayo, J. Irrig. Drain. Engrg., ASCE, 115(4), 769–770.
8.
James, L. G. (1982). “Modeling the performance of center pivot irrigation systems operating on variable topography.” Trans., Amer. Soc. Agric. Engrs., 25(1), 143–149.
9.
Kincaid, D. C., and Heermann, D. F. (1970). “Pressure distribution on a center‐pivot sprinkler irrigation system.” Trans. Amer. Soc. Agric. Engrs., 13(5), 556–558.
10.
Kreyszig, E. (1983). Advanced engineering mathematics. John Wiley and Sons, New York, N.Y.
11.
Pair, C. H., Hinz, W. W., Reid, C., and Frost, K. R. (1975). Sprinkler irrigation. 4th Ed. Sprinkler Irrigation Association. Silver Spring, MD
12.
Reddy, J. M., and Apolayo, H. (1988). “Friction correction factor for center‐pivot irrigation systems.” J. Irrig. Drain. Engrg., ASCE, 114(1), 183–185.
13.
Scaloppi, E. J. (1988). “Adjusted F factor for multiple‐outlet pipes.” J. Irrig. Drain. Engrg., ASCE, 114(1), 169–174.
14.
Smith, R. J. (1990). Discussion of “Adjusted F factor for multiple‐outlet pipes,” by E. J. Scaloppi. J. Irrig. Drain. Engrg., ASCE, 116(1), 134–136.
15.
Wu, I‐Pai, and Gitlin, H. M. (1973). “Hydraulics and uniformity for drip irrigation.” J. Irrig. Drain. Div., ASCE, 99(2), 157–168.
Information & Authors
Information
Published In
Copyright
Copyright © 1993 American Society of Civil Engineers.
History
Received: Nov 19, 1991
Published online: Jan 1, 1993
Published in print: Jan 1993
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.