Darcy‐Weisbach Roughness Coefficients for Gravel and Cobble Surfaces
Publication: Journal of Irrigation and Drainage Engineering
Volume 118, Issue 1
Abstract
A laboratory study is conducted to measure Darcy‐Weisbach roughness coefficients for selected gravel and cobble materials. Varying rates of flow are introduced into a flume in which a given size class of gravel or cobble material is securely attached. Roughness coefficients are calculated from measurements of discharge rate and flow velocity. The laboratory data are used to develop regression equations for relating roughness coefficients to surface cover and Reynolds number. The regression relations, which are developed for values of the Reynolds number from approximately 500 to 16,000, are tested using hydraulic data collected on surfaces containing a distribution of size classes. Close agreement between predicted and measured Darcy‐Weisbach roughness coefficients is obtained by adding the roughness contributions of individual size classes. Equations are also presented for estimating surface cover from measurements of gravel and cobble mass. Accurate prediction of roughness coefficients for gravel and cobble surfaces will improve our ability to understand and properly model upland flow hydraulics.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Abrahams, A. D., Parsons, A. J., and Luk, S. H. (1986). “Resistance to overland flow on desert hillslopes.” J. Hydrol., 88, 343–363.
2.
Chow, V. T. (1959). Open channel hydraulics, McGraw‐Hill, New York, N.Y.
3.
Dunne, T., and Dietrich, W. E. (1980). “Experimental study of Horton overland flow on tropical hillslopes. 2. Hydraulic characteristics and hillslope hydrographs.” Zeitschrift für Geomorphologie Supplement Band, Berlin, Germany, 35, 60–80(in German).
4.
Emmett, W. W. (1970). “The hydraulics of overland flow on hillslopes.” Prof. Paper 662‐A, U.S. Geological Survey, Washington, D.C.
5.
Engman, E. T. (1986). “Roughness coefficients for routing surface runoff.” J. Irrig. and Drain. Engrg., ASCE, 112(1), 39–53.
6.
“Friction factors in open channels.” (1963). ASCE Task Force on Friction Factors in Open Channels, J. Hydr. Div., ASCE, 89(2), 97–143.
7.
Gilley, J. E., Kottwitz, E. R., and Simanton, J. R. (1990). “Hydraulic characteristics of rills.” Trans., American Society of Agricultural Engineers, 33(6), 1900–1906.
8.
Gilley, J. E., Kottwitz, E. R., and Wieman, G. A. (1991). “Roughness coefficients for selected residue materials.” J. Irrig. and Drain. Engrg., ASCE, 117(4), 503–514.
9.
Guy, H. P. (1969). “Laboratory theory and methods for sediment analysis.” U.S. Geological Survey Book 5, U.S. Geological Survey, Washington, D.C., 23–30.
10.
Laflen, J. M., Baker, J. L., Hartwig, R. O., Buchele, W. F., and Johnson, H. P. (1978). “Soil and water loss from conservation tillage systems.” Trans., American Society of Agricultural Engineers, 21(5), 881–885.
11.
Liong, S. Y., Selvalingam, S., and Brady, D. K. (1989). “Roughness values for overland flow in subcatchments.” J. Irrig. and Drain. Engrg., ASCE, 115(2), 203–214.
12.
Phelps, H. O. (1975). “Shallow laminar flows over rough granular surfaces.” J. Hydr. Div., ASCE, 101(3), 367–384.
13.
Roels, J. M. (1984). “Flow resistance in concentrated overland flow on rough slope surfaces.” Earth Surface Processes and Landforms, 9, 541–551.
14.
Savat, J. (1980). “Resistance to flow in rough supercritical sheet flow.” Earth Surface Processes and Landforms, 5, 103–122.
15.
Woo, D. C., and Brater, E. F. (1961). “Laminar flow in rough rectangular channels.” J. Geophys. Res., 66(12), 4207–4217.
Information & Authors
Information
Published In
Journal of Irrigation and Drainage Engineering
Volume 118 • Issue 1 • January 1992
Pages: 104 - 112
Copyright
Copyright © 1992 ASCE.
History
Published online: Jan 1, 1992
Published in print: Jan 1992
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.