Unimodal Surface Irrigation Efficiency
Publication: Journal of Irrigation and Drainage Engineering
Volume 114, Issue 1
Abstract
A new concept in surface irrigation efficiency, termed deficit/excess efficiency, is presented; it has potential for use as an objective function for optimization purposes in the design and operation of on‐farm irrigation systems. This concept, which yields a unimodal function of the volume of water applied, combines selected characteristics of application efficiency, storage efficiency, and Christiansen's uniformity coefficient. Under normal conditions, small applications of water produce high application efficiency, but a low uniformity coefficient and storage efficiency; conversely, large applications produce a high uniformity coefficient and storage efficiency, but low application efficiency. Thus, none of these latter terms are unimodal functions of the volume of water applied. The proposed deficit/excess efficiency can be modified according to management criteria to assign a benefit or penalty to the amount of runoff, deep percolation, and under irrigation in the irrigated field. Algebraic relationships between deficit/excess efficiency and other efficiency terms are presented. A field example comparing this efficiency term with others is provided.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
ASCE On‐Farm Irrigation Committee of the Irrigation and Drainage Division. (1978). “Describing irrigation efficiency and uniformity.” J. Irrig. and Drain. Div., ASCE, 104(1), 35–41.
2.
Bos, M. G. (1985). “Summary of ICID definitions on irrigation efficiency.” International Commission on Irrigation and Drainage, 34(1), 28–31.
3.
Merriam, J. L., Shearer, M. N., and Burt, C. M. (1980). “Evaluating irrigation systems and practices.” Design and Operation of Farm Irrigation Systems (ASAE Monograph No. 3), American Society of Agricultural Engineers, St. Joseph, Mich., 721–724.
4.
Merriam, J. L., and Keller, J. (1978). Farm irrigation system evaluation: a guide for management. 3rd ed., Utah State University, Logan, Ut.
5.
Merriam, J. L. (1985). “Furrow irrigation evaluation using the advance ratio.” ASAE Paper No. 85‐2067, American Society of Agriculture Engineers, St. Joseph, Mich.
6.
Reddell, D. L. (1981). “Modified rate of advance method for an automatic furrow irrigation system.” ASAE Paper 81‐2552, American Society of Agricultural Engineers, St. Joseph, Mich., 13.
7.
Warrick, A. W. (1983). “Interrelationships of irrigation uniformity terms.” J. Irrig. and Drain. Div., ASCE, 109(3), 317–332.
Information & Authors
Information
Published In
Journal of Irrigation and Drainage Engineering
Volume 114 • Issue 1 • February 1988
Pages: 156 - 168
Copyright
Copyright © 1988 ASCE.
History
Published online: Feb 1, 1988
Published in print: Feb 1988
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.