Reuse System Design for Border Irrigation
Publication: Journal of Irrigation and Drainage Engineering
Volume 111, Issue 2
Abstract
A procedure is presented for designing a system to reuse runoff from free outflow irrigation borders. Runoff volumes are obtained using four dimensionless variables and runoff curves developed with a zero‐inertia mathematical model. An example of the design procedure includes different modes of reuse system operation.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Bondurant, J. A., “Design of Recirculating Irrigation Systems,” Transactions, American Society of Agricultural Engineers, Vol. 12, No. 2, 1969, pp. 195–201.
2.
Davis, J. R., “Design of Irrigation Tailwater Systems,” Transactions, American Society of Agricultural Engineers, Vol. 7, No. 3, 1964, pp. 336–338.
3.
Larson, C. L., “Planning Pump Drainage Outlets,” Agricultural Engineering, Vol. 37, 1956, pp. 38–40.
4.
Larson, C. L., and Manbeck, D. M., “Factors in Drainage Pumping Efficiency,” Agricultural Engineering, Vol. 42, 1961, pp. 296–297, 305.
5.
Marsh, A. W., Tileston, F. M., and Wolfe, J. W., “Improving Irrigation in Eastern Oregon,” Agricultural Experiment Station Bulletin No. 558, Oregon State University, Corvallis, Oreg., 1956.
6.
Ohmes, F. E., and Manges, H. L., “Estimating Runoff From Furrow Irrigation,” Presented at the June, 1972, ASAE Summer Meeting, Paper 78‐2008, 1972.
7.
Pope, L. D., and Barefoot, A. D., “Reuse of Surface Runoff from Furrow Irrigation,” Transactions, American Society of Agricultural Engineers, Vol. 16, No. 6, 1973, pp. 1088–1091.
8.
Shatanawi, M. R., “Analysis and Design of Irrigation in Sloping Borders,” University of California, at Davis, Calif., in 1980, in partial fulfillment of the requirements for the Doctoral degree.
9.
Shockley, D. G., “Evaluating Furrow and Corrugation Irrigation,” Journal of the Irrigation and Drainage Division, ASCE, Vol. 85, No. IR4, 1959, pp. 65–72.
10.
Strelkoff, T., and Katopodes, N. D., “End Depth Under Zero‐Inertia Conditions,” Journal of the Hydraulics Division, ASCE, Vol. 103, No. HY7, 1977, pp. 699–711.
11.
Stringham, G. E., and Hamad, S. N., “Design of Irrigation Runoff Recovery System,” Journal of the Irrigation and Drainage Division, ASCE, Vol. 101, No. IR3, 1975, pp. 209–219.
12.
Tyler, C. L., Corey, G. L., and Swarner, L. B., “Evaluating Water Use on a New Irrigation Project,” Idaho Agricultural Experiment Station Research Bulletin No. 62, 1964.
13.
U.S. Soil Conservation Service, “Border Irrigation,” SCS National Engineering Handbook, USDA, Chapt. 4, Section 15, 1974.
14.
Wilke, D. C., “Theoretical Irrigation Tailwater Volumes,” Journal of the Irrigation and Drainage Division, ASCE, Vol. 99, No. IR3, 1973, pp. 415–420.
15.
Willardson, L. S., and Bishop, A. A., “Analysis of Surface Irrigation Application Efficiency,” Journal of the Irrigation and Drainage Division, ASCE, Vol. 93, No. IR2, 1967, pp. 21–36.
16.
Yitayew, M., “Reuse System Design for Border Irrigation,” thesis presented to University of Arizona, at Tucson, Ariz., in 1982, in partial fulfillment of the requirements for the Doctoral degree.
17.
Yitayew, M., and Fangmeier, D. D., “Dimensionless Runoff Curves for Irrigation Borders,” Journal of Irrigation and Drainage Engineering, ASCE, Vol. 110, No. 2, 1984, pp. 179–191.
Information & Authors
Information
Published In
Copyright
Copyright © 1985 ASCE.
History
Published online: Jun 1, 1985
Published in print: Jun 1985
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.