Local Balance Unsteady Friction Model
Publication: Journal of Hydraulic Engineering
Volume 135, Issue 1
Abstract
The paper proposes the evaluation of unsteady friction by a one-dimensional local balance model. The model is applied for the case of water hammer in a single pipeline for both the downstream end and upstream end valve, and for both rapid valve closure and opening. The model is based on local balance of the friction force. Comparisons with experimental results show that the model correctly predicts the extreme values of pressure head oscillation, as well as its shape for both rapid valve closure and opening, and then overcomes the limits of previous unsteady friction models based on instantaneous acceleration. As the comparisons with experimental results can be made easily only for pressure oscillations and can be affected by dissipation mechanisms other than friction, the performance of the model is examined also by comparison with the results of a two-dimensional low-Reynolds number model.
Get full access to this article
View all available purchase options and get full access to this article.
References
Axworthy, D. H., Ghidaoui, M. S., and McInnis, D. A. (2000). “Extended thermodynamics derivation of energy dissipation in unsteady pipe flow.” J. Hydraul. Eng., 126(4), 276–287.
Babovic, V., Wu, Z., and Larsen, L. C. (1994). “Calibrating hydrodynamic models by means of simulated evolution.” Hydroinformatics, 94, Vol. I, A. Vervey, A. W. Minns, V. Babovic, and C. Maksimovic, eds., Balkema, Rotterdam, The Netherlands, 193–200.
Bergant, A., and Simpson, A. R. (1994). “Estimating unsteady friction in transient cavitating pipe flow.” Proc., 2nd Int. Conf. on Water Pipeline Systems, BHR Group, Edinburgh, Scotland, 3–16.
Bergant, A., Simpson, A. R., and Vitkovsky, J. (2001). “Developments in unsteady pipe flow friction modeling.” J. Hydraul. Res., 39(3), 249–257.
Bratland, O. (1986). “Frequency-dependent friction and radial kinetic energy variation in transient pipe flow.” Proc., 5th Int. Conf. on Pressure Surges, BHRA, Cranfield, U.K., 95–101.
Brunone, B., Golia, U. M., and Greco, M. (1991a). “Modelling of fast transients by numerical methods.” Proc., Int. Meeting on Hydraulic Transients and Water Column Separation, IAHR, Valencia, Spain, 273–282.
Brunone, B., Golia, U. M., and Greco, M. (1991b). “Some remarks on the momentum equation for fast transients.” Proc., Int. Meeting on Hydraulic Transients and Water Column Separation, IAHR, Valencia, Spain, 201–209.
Budny, D. D., Wyggert, D. C., and Hatfield, F. (1990). “Energy dissipation in the axially-coupled model for transient flow.” Proc., 6th Int. Conf. on Pressure Surges, BHRA, Cambridge, U.K., 15–26.
Bughazem, M. B., and Anderson, A. (1996). “Problems with simple models for damping in unsteady flow.” Proc., 7th Int. Conf. on Pressure Surges and Fluid Transients in Pipelines and Open Channels, BHR Group, Harrogate, U.K., 537–548.
Cannizzaro, D., and Pezzinga, G. (2003). “2D numerical model for transient vaporous cavitation.” Proc., XXX IAHR Congress, Theme D, IAHR, Thessaloniki, Greece, 751–758.
Cannizzaro, D., and Pezzinga, G. (2005). “Energy dissipation in transient gaseous cavitation.” J. Hydraul. Eng., 131(8), 724–732.
Carroll, D. L. (1996). “Genetic algorithms and optimizing chemical oxygen-iodine lasers.” Developments in theoretical and applied mechanics, H. B. Wilson, R. C. Batra, C. W. Bert, A. M. J. Davis, R. A. Schapery, D. S. Stewart, and F. F. Swinson, eds., Vol. XVIII, School of Engineering, University of Alabama, Tuscaloosa, Ala, 411–424.
Carstens, M. R., and Roller, J. E. (1959). “Boundary-shear stress in unsteady turbulent pipe flow.” J. Hydr. Div., 85(HY2), 67–81.
Daily, J. W., Hankey, W. L., Olive, R. W., and Jordan, J. M. (1956). “Resistance coefficient for accelerated and decelerated flows through smooth tubes and orifices.” Trans. ASME, 78(7), 1071–1077.
Darwin, C. (1859). On the origine of species by means of natural selection, Murray, London.
Eichinger, P., and Lein, G. (1992). “The influence of friction on unsteady pipe flow.” Unsteady flow and fluid transients, R. Bettes and J. Watts, eds., Balkema, Rotterdam, The Netherlands, 41–50.
Goldberg, D. L. (1988). “Sizing populations for serial and parallel genetic algorithms.” Rep. No. 88004, The Clearinghouse for Genetic Algorithms, University of Alabama, Tuscaloosa, Ala.
Goldberg, D. L. (1989). Genetic algorithm in search, optimization & machine learning, Addison Wesley, Reading, Mass.
Holland, J. (1975). Adaptation in natural and artificial systems, The University of Michigan Press, Ann Arbor, Mich.
Krishnakumar, K. (1989). “Micro-genetic algorithms for stationary and non-stationary function optimization.” Proc. SPIE-1196 Conf. on Intelligent Control and Adaptive Systems, SPIE, Philadelphia, Pa., 289–296.
Kucienska, B. (2004). “Friction relaxation model for fast transient flows.” Thèse présentée pour l’obtention du grade de Docteur en Sciences Appliqués, Université Catholique de Louvain.
Lam, C. K. G., and Bremhorst, K. A. (1981). “Modified form of the model for predicting wall turbulence.” J. Fluids Eng., 103(3), 456–460.
Modica, C., and Pezzinga, G. (1992). “Un modello quasi bidimensionale per il moto vario elastico in regime turbolento.” Atti, XXIII Convegno di Idraulica e Costruzioni Idrauliche, Florence, Italy, E191-E205 (in Italian).
Pezzinga, G. (1999). “Quasi-2D model for unsteady flow in pipe networks.” J. Hydraul. Eng., 125(7), 676–685.
Pezzinga, G. (2000a). “Affidabilità di modelli semi-empirici di turbolenza per la valutazione delle resistenze di attrito in condizioni di moto vario.” L’Acqua, AII, N. 1, 29–38 (in Italian).
Pezzinga, G. (2000b). “Evaluation of unsteady flow resistances by quasi-2D or 1D models.” J. Hydraul. Eng., 126(10), 778–785.
Pezzinga, G. (2002). “Unsteady flow in hydraulic networks with polymeric additional pipe.” J. Hydraul. Eng., 128(2), 238–244.
Pezzinga, G. (2003). “Second viscosity in transient cavitating pipe flows.” J. Hydraul. Res., 41(6), 656–665.
Pezzinga, G., and Brunone, B. (2006). “Turbulence, friction and energy dissipation in transient pipe flow.” Vorticity and turbulence effects in fluid structures interactions, M. Brocchini and F. Trivellato, eds., WIT Press, Southampton, U.K., 213–236.
Ramos, H., Covas, D., Borga, A., and Loureiro, D. (2004). “Surge damping in pipe systems: Modeling and experiments.” J. Hydraul. Res., 42(4), 413–425.
Sawfat, H. H., and Polder, J. (1973). “Friction-frequency dependence for oscillatory flows in circular pipe.” J. Hydr. Div., 99(HY11), 1933–1945.
Silva-Araya, W. F., and Chaudhry, M. H. (1997). “Computation of energy dissipation in transient flow.” J. Hydraul. Eng., 123(2), 108–115.
Trikha, A. K. (1975). “An efficient method for simulating frequency-dependent friction in liquid flow.” J. Fluids Eng., 97(1), 97–105.
Vardy, A. E., and Brown, J. M. B. (1995). “Transient, turbulent, smooth pipe friction.” J. Hydraul. Res., 33(4), 435–456.
Vardy, A. E., and Brown, J. M. B. (1996). “On turbulent, unsteady, smooth-pipe friction.” Proc., 7th Int. Conf. on Pressure Surges and Fluid Transients in Pipelines and Open Channels, BHR Group, Harrogate, U.K., 289–311.
Vardy, A. E., and Brown, J. M. B. (2003). “Transient turbulent friction in smooth pipe flows.” J. Sound Vib., 259(5), 1011–1036.
Vardy, A. E., Brown, J. M. B. (2004a). “Efficient approximation of unsteady friction weighting functions.” J. Hydraul. Eng., 130(11), 1097–1107.
Vardy, A. E., Brown, J. M. B. (2004b). “Transient turbulent friction in fully rough pipe flows.” J. Sound Vib., 270(1–2), 233–257.
Vardy, A. E., and Hwang, K. (1991). “A characteristics model of transient friction in pipes.” J. Hydraul. Res., 29(5), 669–684.
Vitkovsky, J. P., Bergant, A., Simpson, A. R., and Vardy, A. E., Lambert, M. F. (2006). “Systematic evaluation of one-dimensional unsteady friction models in simple pipelines.” J. Hydraul. Eng., 132(7), 696–708.
Wylie, E. B. (1996). “Frictional effects in unsteady turbulent pipe flow.” Applied mechanics in the Americas, M. Rysz, L. A. Godoy, and L. E. Suarez, eds., Vol. 5, The University of Iowa Press, Iowa City, Iowa, 5, 29–34.
Zhao, M., and Ghidaoui, M. S. (2006). “Investigation of turbulence behavior in pipe transients using a model.” J. Hydraul. Res., 44(5), 682–692.
Zielke, W. (1968). “Frequency-dependent friction in transient pipe flow.” Trans. ASME, J. Basic Eng. (Trans. ASME J. Basic Eng.), 90(1), 109–115.
Information & Authors
Information
Published In
Copyright
© 2009 ASCE.
History
Received: May 12, 2007
Accepted: Jun 16, 2008
Published online: Jan 1, 2009
Published in print: Jan 2009
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.