Variable-Concentration and Boundary Effects on Debris Flow Discharge Predictions
Publication: Journal of Hydraulic Engineering
Volume 134, Issue 9
Abstract
The uniform flow of natural debris mixture is generally modeled assuming a uniform solid concentration and the absence of lateral walls. The resulting flow discharges are, however, higher than those observed and, in the case of erodible boundaries, the equilibrium between the moving and nonmoving mixtures cannot be simulated. Such a model also cannot simulate the effect of lateral rigid boundaries that generate lateral velocity and concentration gradients. This paper describes a numerical model to determine the concentration and velocity distribution in the two directions transverse to the flow. The model is applied to a uniform laminar flow of a mixture with a shear-thickening Herschel–Bulkley constitutive behavior, with rheological parameters expressed in terms of the local solid concentration, and allows the simulation of different conditions in the presence of both erodible and rigid boundaries.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The writers wish to thank the reviewers whose comments and suggestions greatly helped to improve the quality of the paper.
References
Ancey, C. (2001). “Debris flows and related phenomena.” Geomorphological fluid mechanics, N. J. Balmforth and A. Provenzale, eds., Springer, Heidelberg Germany, 528–547.
Armanini, A., Capart, H., Fraccarollo, L., and Larcher, M. (2005). “Rheological stratification in experimental free-surface flows of granular-liquid mixtures.” J. Fluid Mech., 532(5), 269–319.
Armanini, A., Dalrì, C., Fraccarollo, L., Larcher, M., and Zorzin, E. (2003). “Experimental analysis of the general features of uniform mud-flow.” 3rd Int. Conf. Debris-Flow Hazard Mitigation, Vol. 1, 423–434.
Armanini, A., Fraccarollo, L., Guarino, L., Martino, R., and Bin, Y. (2000). “Experimental analysis of the general features of uniform flows over a loose bed.” 2nd Int. Conf. on Debris-Flow Hazards Mitigation: Mechanics, Prediction, and Assessment.
Bagnold, R. A. (1954). “Experiments on a gravity-free dispersion of large solid spheres in a Newtonian fluid under shear.” Proc. R. Soc. London, Ser. A, 225(8), 49–63.
Bercovier, M., and Engleman, M. (1980). “A finite element method for incompressible non-Newtonian flows.” J. Comput. Phys., 36 (July), 313–326.
Cantelli, A., Scarella, M., and Seminara, G. (2003). “Uniform mudflow in narrow cross sections: Theory and experiments.” 3rd IAHR Symp. on River, Costal and Estuarine Morphodynamics.
Coussot, P. (1994). “Steady, laminar, flow of concentrated mud suspensions in open channel.” J. Hydraul. Res., 32(4), 535–559.
Coussot, P., Laigle, D., Arattano, M., Deganutti, A., and Marchi, L. (1998). “Direct determination of rheological characteristics of debris flow.” J. Hydraul. Eng., 124(8), 865–868.
Coussot, P., and Meunier, M. (1996). “Recognition, classification and mechanical description of debris flows.” Earth-Sci. Rev., 40(3–4), 209–227.
Coussot, P., and Piau, J. M. (1995). “A large-scale field coaxial cylinder rheometer to study the rheology of natural coarse suspensions.” J. Rheol., 39(1), 105–124.
Dalrì, C., Fraccarollo, L., Larcher, M., and Armanini, A. (2004). “Analisi sperimentale per la caratterizzazione del flusso di miscugli iperconcentrata di origine sintetica e naturale [Experimental analysis for the characterization of hyper-concentrated flows of natural and synthetic mixtures].” XXIX National Conf. of Hydraulics and Hydraulic Engineering.
Davies, T. R. H. (1986). “Large debris flows: A macro-viscous phenomenon.” Acta Mech., 63(1–4), 161–178.
Dodge, D. W., and Metzner, A. B. (1959). “Turbulent flow of non-Newtonian systems.” AIChE J., 5(2), 189–204.
Egashira, S., Miyamoto, K., and Itoh, T. (1997). “Constitutive equations of debris flow and their applicability.” Proc., 1st Int. Conf. on Debris Flow Hazard Mitigation: Mechanics, Prediction, and Assessment, Balkema, Rotterdam, The Netherlands.
Iverson, R. M. (1997). “The physics of debris flows.” Rev. Geophys., 35(3), 245–296.
Julien, P., and Lan, Y. (1991). “On the rheology of hyperconcentrations.” J. Hydraul. Eng., 117(3), 346–353.
Macosko, C. W. (1994). Rheology: Principles, measurements and applications, Wiley-VCH, New York.
Major, J. J., and Iverson, R. M. (1999). “Debris-flow deposition—Effects of porefluid pressure and friction concentrated at flow margins.” Geol. Soc. Am. Bull., 111(10), 1424–1434.
Major, J. J., and Pierson, T. C. (1992). “Debris flow rheology experimental analysis of fine-grained slurries.” Water Resour. Res., 28(3), 841–857.
Martino, R. (2003). “Experimental analysis on the rheological properties of a debris flow deposit.” 3rd Int. Conf. on Debris-Flow Hazards Mitigation: Mechanics, Prediction, and Assessment.
Martino, R., and Papa, M. N. (2003). “Predictions by a rheological model of uniform free surface mudflows.” Int. Conf. on Fast Slope Movements-Prediction and Prevention for Risk Mitigation, IC-FSM2003.
Martino, R., and Papa, M. N. (2004). “Effetto delle pareti nelle correnti detritiche: Primi risultati.” XXIX National Conf. of Hydraulics and Hydraulic Engineering (in Italian).
Martino, R., Sabatino, C., and Taglialatela, L. (2001). “An experimental analysis on the rheology of a granular debris flow. Part I: Collisional stresses.” Proc., XXIX IAHR Congress, Beijing.
Metzner, A. B., and Reed, J. C. (1955). “Flow of non-Newtonian fluids—Correlation of the laminar, transition, and turbulent-flow regions.” AIChE J., 1(4), 434–440.
O’Brien, J. S., and Julien, P. Y. (1988). “Laboratory analysis of mudflows properties.” J. Hydraul. Eng., 114(8), 877–887.
Papa, M. N. (2001). “Propagazione di correnti detritiche in alvei a fondo mobile.” Ph.D. thesis, Univ. of Salerno, Salerno, Italy (in Italian).
Phillips, R. J., Armstrong, R. C., Brown, R. A., Graham, A. L., and Abbot, J. R. (1992). “A constitutive equation for concentrated suspensions that accounts for shear-induced particle migration.” Phys. Fluids A, 4(1), 30–40.
Schuh, S. C. (1964). “Computer makes surge-pressure calculations useful.” Oil & Gas J., 96–104.
Takahashi, T. (1991). Debris flow, IAHR/AIRH, monograph, Balkema, Rotterdam, The Netherlands.
Takahashi, T., Nakagawa, H., and Satofuka, Y. (2000). “Newtonian fluid model for viscous debris-flow.” 2nd Int. Conf. on Debris Flow Hazard Mitigation: Mechanics, Prediction, and Assessment, Balkema, Rotterdam, The Netherlands.
Whipple, K. X. (1997). “Open channel flow of Bingham fluids: Applications in debris flow research.” J. Geol., 105(3), 243–263.
Information & Authors
Information
Published In
Copyright
© 2008 ASCE.
History
Received: Nov 30, 2006
Accepted: Jan 7, 2008
Published online: Sep 1, 2008
Published in print: Sep 2008
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.