Computation of the Equivalent Macroscopic Permeability Tensor of Discrete Networks with Heterogeneous Segment Length
Publication: Journal of Hydraulic Engineering
Volume 134, Issue 6
Abstract
Flow in discrete networks can be observed in biological, geological, or technical systems. Often, the number of individual segments is very large. Therefore, discrete pressure and flow calculation in each single segment becomes very time consuming, and a continuum model becomes attractive. We apply a global upscaling method based on a spatial average to investigate a porous media network model with heterogeneous pore length distribution. For this purpose, the porous media was modeled by triangular networks. For such networks, we characterize the representative elementary volume (REV) size and show that using window sizes smaller than the REV requires an heterogeneous Darcian description. We find that the permeability has to be distributed according to a log-Gaussian distribution with variance and correlation length depending on the window size and the porous microstructure. Finally, we apply the procedure to an anisotropic regular network for which an analytical solution can be found and show that using this method leads to the correct analytical behavior.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This research project has been financed by the Region Ile de France.
References
Beavers, G. S., and Joseph, D. D. (1967). “On the boundary conditions at a naturally permeable wall.” J. Fluid Mech., 30, 197–207.
Durlofsky, L. J. (1991). “Numerical calculation of equivalent grid block permeability tensors for heterogeneous porous media.” Water Resour. Res., 27, 699–708.
Gómez-Hernándéz, J. (1990). “Simulation of block permeability conditioned upon data measured at a different scale.” Proc., Model CARE 90: Calibration and Reliability in Groundwater Modelling, Vol. 195, IAHS, Wallingford, U.K., 407–416.
Pickup, G. E., Jensen, J. L., Ringrose, P. S., and Sorbie, K. S. (1992). “A method for calculating permeability tensors using perturbed boundary conditions.” Proc., 3rd European Conf. on Mathematics of Oil Recovery, Delft, The Netherlands.
Pickup, G. E., Ringrose, P. S., Jensen, J. L., and Sorbie, K. S. (1994). “Permeability tensors for sedimentary structures.” Math. Geol., 26, 227–250.
Pouya, A. (2005). “Tenseurs de permébilité équivalente d’un domaine hétérogène fini.” C. G. Géoscience, 337, 581–588.
Pouya, A., and Curtois, A. (2002). “Définition de la perméabilité équivalente des massifs fracturés par des méthodes d’homogénéisation.” C. G. Géoscience, 334, 975–979.
Renard, Ph., and de Marsily, G. (1997). “Calculating equivalent permeability: A review.” Adv. Water Resour., 20, 253–278.
Wen, X.-H., Durlofsky, L. J., Lee, S. H., and Edwards, M. G. (2000). “Full tensor upscaling of geologically complex reservoir description.” Proc., 2000 SPE Annual Technical Conf., Dallas, SPE No. 62928.
Wen, X.-H., and Gómez-Hernándéz, J. (1996). “Upscaling hydraulic conductivities in heterogeneous media: An overview.” J. Hydrol., 183, 9–32.
White, C. D., and Horne, R. N. (1987). “Computing absolute transmissibility in the presence of fine-scale heterogeneity.” Proc., Symp. on Reservoir Simulation, San Antonio, Tex., SPE No. 16011.
Wu, X. H., Efendiev, Y., and Hou, T. Y. (2002). “Analysis of upscaling absolute permeability.” Discrete Contin. Dyn. Syst., Ser. B, 2, 185–204.
Information & Authors
Information
Published In
Copyright
© 2008 ASCE.
History
Received: Dec 12, 2006
Accepted: Oct 17, 2007
Published online: Jun 1, 2008
Published in print: Jun 2008
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.