Case Study of the Use of Remotely Sensed Data for Modeling Flood Inundation on the River Severn, U.K.
Publication: Journal of Hydraulic Engineering
Volume 134, Issue 5
Abstract
A methodology for using remotely sensed data to both generate and evaluate a hydraulic model of floodplain inundation is presented for a rural case study in the United Kingdom: Upton-upon-Severn. Remotely sensed data have been processed and assembled to provide an excellent test data set for both model construction and validation. In order to assess the usefulness of the data and the issues encountered in its use, two models for floodplain inundation were constructed: one based on an industry standard one-dimensional approach and the other based on a simple two-dimensional approach. The results and their implications for the future use of remotely sensed data for predicting flood inundation are discussed. Key conclusions for the use of remotely sensed data are that care must be taken to integrate different data sources for both model construction and validation and that improvements in ground height data shift the focus in terms of model uncertainties to other sources such as boundary conditions. The differences between the two models are found to be of minor significance.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The writers would like to thank the Environment Agency for England and Wales for supplying LiDAR data and the river channel bathymetry and QinetiQ Ltd. for supplying the airborne radar data. This research was funded by the Engineering and Physical Sciences Research Council, United Kingdom, through the provision of Grant Nos. EPSRC-GBGR/S17154, EPSRC-GBGR/S17161, and EPSRC-GBGR/S17116.
References
Abbott, M. B. (1979). Computational hydraulics: Elements of the theory of free surface flows, Pitman, London.
Archambeau, P., Dewala, B., Erpicum, S., Detrembleur, S., and Pirotton, M. (2004). “New trends in flood risk analysis: Working with 2D flow models, laser DEM, and a GIS environment.” Proc., River Flow 2004, Balkema, Rotterdam, The Netherlands.
Barré de St-Venant, A. J. C. (1871). “Théorie du mouvement non permanent des eaux avec application aux crues des rivières et à l’introduction des marées dans leur lits.” Compt. Rend., 73, 147–154, 237–240.
Bates, P. D., and de Roo, A. P. J. (2000). “A simple raster-based model for floodplain inundation.” J. Hydrol., 236(1–2), 54–77.
Bates, P. D., Horritt, M. S., Smith, C. N., and Mason, D. (1997). “Integrating remote sensing observations of flood hydrology and hydraulic modelling.” Hydrolog. Process., 11(14), 1777–1795.
Cobby, D. M., Mason, D. C., and Davenport, I. J. (2001). “Image processing of airborne scanning laser altimetry for improved river flood modelling.” ISPRS J. Photogramm. Remote Sens., 56(2), 121–138.
Danish Hydraulic Institute (DHI). (2003). MIKE11 user’s guide, Copenhagen, Denmark.
Dhondia, J. F., and Stelling, G. S. (2002). “Application of one dimensional - two dimensional integrated hydraulic model for flood simulation and damage assessment.” Proc., Hydroinformatics 2002, IWA Publishing, London.
Estrela, T., and Quintas, L. (1994). “Use of a GIS in the modelling of flows on floodplains. Proc., 2nd Int. Conf. on River Flood Hydraulics, Wiley and Sons, Chichester, U.K.
Fleming, G., Frost, L., Huntington, S., Knight, D., Law, F., Rickard, C., Macdougall, K., and Ferguson, A. (2001). “Learning to live with rivers.” Presidential Commission Rep., The Institution of Civil Engineers, London.
Gomes-Pereira, L. M., and Wicherson, R. J. (1999). “Suitability of laser data for deriving geographical data: A case study in the context of management of fluvial zones.” ISPRS J. Photogramm. Remote Sens., 54, 105–114.
Horritt, M. S. (1999). “A statistical active contour model for SAR image segmentation.” Image Vis. Comput., 17(3), 213–224.
Horritt, M. S., and Bates, P. D. (2001). “Predicting floodplain inundation: Raster-based modelling versus the finite element approach.” Hydrolog. Process., 15(5), 825–842.
Horritt, M. S., Mason, D., and Luckman, A. J. (2001). “Flood boundary delineation from synthetic aperture radar imagery using a statistical active contour model.” Int. J. Remote Sens., 22(13), 2489–2507.
Hunter, N. M., et al. (2008). “Benchmarking 2D hydraulic models for urban flood simulations.” Proc. of the Institution of Civil Engineers: Water Management, 161(1), 13–30.
Marsh, T. J., and Dale, M. (2002). “The UK floods of 2000–2001: A hydrometeorological appraisal.” Journal of the Chartered Institution of Water and Environmental Management, 16(3), 180–188.
Mason, D., Cobby, D., Horritt, M. S., and Bates, P. D. (2003). “Floodplain friction parameterization in two-dimensional river flood models using vegetation heights derived from airborne scanning laser altimetry.” Hydrolog. Process., 17(9), 1711–1732.
Smith, M. J., Edwards, E. P., Priestnall, G., and Bates, P. (2006). “Exploitation of new data types to create digital surface models for flood inundation modelling.” Manchester, Flood Risk Management Research Consortium, www.floodrisk.org.uk .
Information & Authors
Information
Published In
Copyright
© 2008 ASCE.
History
Received: Feb 23, 2005
Accepted: Sep 4, 2007
Published online: May 1, 2008
Published in print: May 2008
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.