Scour at Submerged Cylindrical Obstacles under Steady Flow
Publication: Journal of Hydraulic Engineering
Volume 134, Issue 1
Abstract
Results of an experimental study on clear-water scour at submerged cylindrical obstacles (circular cylinders) in uniform bed sediments under steady flow are presented. The scour depths at submerged circular cylinders are compared with the scour depths at corresponding unsubmerged cylinders (extended above the free surface of flow) of the same diameters under similar flow and bed sediment conditions. The scour depth decreases with an increase in submergence ratio. A submergence factor is introduced to determine the scour depth at a submerged cylinder from the information of the scour depth at an unsubmerged cylinder of the same diameter. In addition, the flow fields along the upstream vertical plane of symmetry of unsubmerged and submerged cylinders are presented through vector plots, which reveal that the dimension and strength of the horseshoe vortex decreases with an increase in submergence ratio. The horseshoe vortex circulations, which decrease with an increase in submergence ratio, are computed from the vorticity contours by using the Stokes theorem.
Get full access to this article
View all available purchase options and get full access to this article.
References
Castro, I. P., and Robins, A. G. (1977). “The flow around a surface-mounted cube in uniform and turbulent streams.” J. Fluid Mech., 79, 307–355.
Dey, S. (1995). “Three-dimensional vortex flow field around a circular cylinder in a quasi-equilibrium scour hole.” Sadhana: Proc., Indian Acad. Sci., 20, 871–885.
Dey, S., and Barbhuiya, A. K. (2005). “Flow field at a vertical-wall abutment.” J. Hydraul. Eng., 131(12), 1126–1135.
Dey, S., Bose, S. K., and Sastry, G. L. N. (1995). “Clear water scour at circular piers: A model.” J. Hydraul. Eng., 121(12), 869–876.
Dey, S., and Raikar, R. V. (2007). “Characteristics of horseshoe vortex in developing scour holes at piers.” J. Hydraul. Eng., 133(4), 399–413.
Jain, S. C. (1981). “Maximum clear-water scour around circular piers.” J. Hydr. Div., 107(5), 611–626.
Kim, H. B., and Lee, S. J. (2001). “Time-resolved velocity field measurements of separated flow in front of a vertical fence.” Exp. Fluids, 31, 249–257.
Martinuzzi, R., and Tropea, C. (1993). “The flow around surface-mounted, prismatic obstacles placed in a fully developed channel flow.” J. Fluid Mech., 115, 85–92.
Raikar, R. V., and Dey, S. (2005). “Scour of gravel beds at bridge piers and abutments.” Proc. Inst. of Civ. Eng. (UK), 158, 157–162.
Sousa, J. M. M. (2002). “Turbulent flow around a surface-mounted obstacle using 2D-3C DPIV.” Exp. Fluids, 33, 854–862.
Sumer, B. M., and Fredsøe, J. (2002). The mechanics of scour in the marine environment, World Scientific, Singapore.
Information & Authors
Information
Published In
Copyright
© 2008 ASCE.
History
Received: Apr 12, 2006
Accepted: Feb 9, 2007
Published online: Jan 1, 2008
Published in print: Jan 2008
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.