Conservative Wetting and Drying Methodology for Quadrilateral Grid Finite-Volume Models
Publication: Journal of Hydraulic Engineering
Volume 133, Issue 3
Abstract
Algebraic equations relating fluid volume and the free surface elevation in partially wetted quadrilateral computational cells are derived and incorporated into a Godunov-type, finite-volume, shallow-water model. These equations make it straightforward to reconstruct the free surface elevation based on the volume of fluid in a computational cell, the dependent variable tracked by finite volume models for conservation purposes, regardless of whether the cell is fully or partially wetted. Improvements to the variable reconstruction process streamline the computation of mass and momentum fluxes with approximate Riemann solvers, yielding a model that simulates sub-, super-, and transcritical flows over irregular topography with wetting and drying fronts. Furthermore, the model is free from fluid and scalar mass conservation errors and it eliminates nonphysical distributions of scalars by avoiding artificial concentration and/or dilution at wet/dry interfaces. Use of this wetting and drying methodology adds roughly 10% to the execution time of flow simulations.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This work was supported by a grant from the National Science Foundation (NSFCMS-9984579), whose support is gratefully acknowledged. In addition, the writers thank D. Finnegan and M. Ericsson from the Remote Sensing/GIS Center of the Cold Regions Research and Engineering Laboratory, U.S. Army Corps of Engineers for making Mission Creek terrain data and flood flow estimates available for use in this paper.
References
ASCE Task Committee on Turbulence Models in Hydraulic Computations. (1988a). “Turbulence modeling of surface water flow and transport. Part I.” J. Hydraul. Eng., 114(9), 970–991.
ASCE Task Committee on Turbulence Models in Hydraulic Computations. (1988b). “Turbulence modeling of surface water flow and transport. Part II.” J. Hydraul. Eng., 114(9), 992–1014.
Begnudelli, L., and Sanders, B. F. (2006). “Unstructured grid finite-volume algorithm for shallow-water flow and scalar transport with wetting and drying.” J. Hydraul. Eng., 132(4), 371–384.
Bermudez, A., and Vazquez, M. E. (1994). “Upwind methods for hyperbolic conservation laws with source terms.” Comput. Fluids, 23(8), 1049–1071.
Bradford, S. F., and Sanders, B. F. (2002). “Finite-volume model for shallow-water flooding of arbitrary topography.” J. Hydraul. Eng., 128(3), 289–298.
Bradford, S. F., and Sanders, B. F. (2005). “Performance of high-resolution, nonlevel bed, shallow-water models.” J. Eng. Mech., 131(10), 1073–1081.
Brufau, P., and García-Navarro, P. (2003). “Unsteady free-surface flow simulation over complex topography with a multidimensional upwind technique.” J. Comput. Phys., 186(2), 503–526.
Brufau, P., García-Navarro, P., and Vázquez-Cendón, M. E. (2002). “A numerical model for the flooding and drying of irregular domains.” Int. J. Numer. Methods Fluids, 39(3), 247–275.
Brufau, P., García-Navarro, P., and Vázquez-Cendón, M. E. (2004). “Zero mass error using unsteady wetting-drying conditions in shallow flows over dry irregular topography.” Int. J. Numer. Methods Fluids, 45(10), 1047–1082.
Carrier, G. F., and Greenspan, H. P. (1958). “Water waves of finite amplitude on a sloping beach.” J. Fluid Mech., 4(1), 97–109.
Chapra, S. C., and Canale R. P. (1988), Numerical methods for engineers, 2nd Ed., McGraw-Hill, New York.
Kawahara, M., and Umetsu, T. (1986). “Finite element method for moving boundary problems in river flow.” Int. J. Numer. Methods Fluids, 6(6), 365–386.
Roe, P. L. (1981). “Approximate Riemann solvers, parameter vectors, and difference schemes.” J. Comput. Phys., 43(2), 357–372.
Sanders, B. F. (2002). “Non-reflecting boundary flux function for finite volume shallow-water models.” Adv. Water Resour., 25(2), 195–202.
Sanders, B. F., and Bradford, S. F. (2006). “Impact of limiters on accuracy of high-resolution flow and transport models.” J. Eng. Mech., 132(1), 87–98.
Toro, E. F. (2001). Shock-capturing methods for free-surface shallow flows, Wiley, Chichester, U.K.
Information & Authors
Information
Published In
Copyright
© 2007 ASCE.
History
Received: Dec 13, 2005
Accepted: Apr 24, 2006
Published online: Mar 1, 2007
Published in print: Mar 2007
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.