Turbulent Flow Friction Factor Calculation Using a Mathematically Exact Alternative to the Colebrook–White Equation
This article has a reply.
VIEW THE REPLYThis article has a reply.
VIEW THE REPLYThis article has a reply.
VIEW THE REPLYPublication: Journal of Hydraulic Engineering
Volume 132, Issue 8
Abstract
We present a novel, mathematically equivalent representation of the Colebrook–White equation to compute friction factor for turbulent flow in rough pipes. This new form is simple, no iterative calculations are necessary, and is well suited for accurate friction factor estimation. A limiting case of this equation provided friction factor estimates with a maximum absolute error of 0.029 and a maximum percentage error of 1% over a grid of and values ( ; ). This was more accurate than the best currently available noniterative approximation of the Colebrook–White equation (maximum absolute error of 0.058; maximum percentage error of 1.42%). The superior accuracy, however, was obtained at the expense of a 30% increase in computational effort over the noniterative approximation. The novel equation presented in this study is theoretical and eliminates the need for best fit parameters or complicated initial guesses that are a characteristic of various empirical approximations proposed to date. The simplicity with which this new equation can be solved, coupled with its smooth and predictable error behavior, should make it the method of choice for estimating turbulent flow friction factor in rough pipes.
Get full access to this article
View all available purchase options and get full access to this article.
References
Bird, R. B., Stewart, W. E., and Lightfoot, E. N. (2002). Transport phenomena, Wiley, New York.
Bombardelli, F. A., and García, M. H. (2003). “Hydraulic design of large-diameter pipes.” J. Hydraul. Eng., 129(11), 839–846.
Bombardelli, F. A., and García, M. H. (2005). “Closure to ‘Hydraulic design of large-diameter pipes’ by Fabián A. Bombardelli and Marcelo H. García.” J. Hydraul. Eng., 131(3), 224–225.
Christensen, B. A., Locher, F. A., and Swamee, P. K. (2000). “Discussion of ‘Limitations and proper use of the Hazen–Williams equation.’” J. Hydraul. Eng., 126(2), 167–168.
Churchill, S. W. (1973). “Empirical expressions for the shear stress in turbulent flow in commercial pipe.” AIChE J., 19(2), 375–376.
Goudar, C. T., and Sonnad, J. R. (2003). “Explicit friction factor correlation for turbulent fluid flow in smooth pipes.” Ind. Eng. Chem. Res., 42(12), 2878–2880.
Gregory, G. A., and Fogarasi, M. (1985). “Alternate to standard friction factor equation.” Oil & Gas Journal, 120–127.
Haaland, S. E. (1983). “Simple and explicit formulas for the friction factor in turbulent pipe flow.” J. Fluids Eng., 105(3), 89–90.
Keady, G. (1998). “Colebrook–White formula for pipe flows.” J. Hydraul. Eng., 124(1), 96–97.
Liou, C. P. (1998). “Limitations and proper use of the Hazen–Williams equation.” J. Hydraul. Eng., 124(9), 951–954.
Manadilli, G. (1997). “Replace implicit equations with sigmoidal functions.” Chem. Eng., 104(8), 129–132.
Moody, L. F. (1944). “Friction factors for pipe flow.” Trans. ASME, 66(8), 671–684.
Moody, L. F. (1947). “An approximate formula for pipe friction factors.” Trans. ASME, 69, 1005–1006.
Press, W. H., Teukolsky, S. A., Vettering, W. T., and Flannery, B. B. (1992). Numerical recipes in FORTRAN: The art of scientific computing, Cambridge University Press, New York.
Romeo, E., Royo, C., and Monzón, A. (2002). “Improved explicit equations for estimation of the friction factor in rough and smooth pipes.” Chem. Eng. J., 86(3), 369–374.
Round, G. F. (1980). “An explicit approximation for the friction factor–Reynolds number relation for rough and smooth pipes.” Can. J. Chem. Eng., 58(1), 122–123.
Serghides, T. K. (1984). “Estimate friction factor accurately.” Chem. Eng. J., 91(5), 63–64.
Sonnad, J. R., and Goudar, C. T. (2004). “Constraints for using the Lambert function-based explicit Colebrook–White equation.” J. Hydraul. Eng., 130(9), 929–931.
Swamee, P. K., and Jain, A. K. (1976). “Explicit equations for pipe-flow problems.” J. Hydraul. Div., Am. Soc. Civ. Eng., 102(5), 657–664.
Walski, T. M. (2005). “Discussion of ‘Hydraulic design of large-diameter pipes.’” J. Hydraul. Eng., 131(3), 224–224.
Wood, D. J. (1966). “An explicit friction factor relationship.” Civ. Eng. (N.Y.), 36(12), 60–61.
Zigrang, D. J., and Sylvester, N. D. (1982). “Explicit approximations to the solution of Colebrook’s friction factor equation.” AIChE J., 28(3), 514–515.
Information & Authors
Information
Published In
Copyright
© 2006 ASCE.
History
Received: Sep 15, 2004
Accepted: Jul 19, 2005
Published online: Aug 1, 2006
Published in print: Aug 2006
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.