New Facility to Study River Abrasion Processes
Publication: Journal of Hydraulic Engineering
Volume 132, Issue 6
Abstract
This technical note presents a new facility which was constructed in order to study sediment and bedrock abrasion processes during fluvial transport. These processes exert an important control on long-term landscape evolution but they are still poorly understood and inadequately quantified. The proposed experimental device is an annular flume with four fluid injections coupled to a close water circuit and a powerful pump, in order to reach hydrodynamic conditions up to whose prevailing in mountain streams. Fluid surface geometry and visualization experiments with a high speed camera allow us to monitor hydrodynamic variables and sediment motion during the experiments. Despite the circular geometry of the flume, pebble trajectories are found to closely mimic the bedload behavior in straight flume. Based also on a direct comparison with pebble abrasion rates along a large Himalayan River, we hypothesize that our device simulates in a realistic way transport processes and consequently abrasion processes in mountain rivers.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
French programs “Action coup de pouce” and PNRH have financially supported this work.
References
Attal, M. (2003). “Erosion des galets des rivières de montagne au cours du transport fluvial: Étude expérimentale et application aux réseaux hydrographiques d’orogènes actifs.” Ph.D. thesis, Univ. Joseph Fourier, Grenoble, France.
Attal, M., and Lavé, J. (2006). “Changes of bedload characteristics along the Marsyandi River (central Nepal): Implications for understanding hillslope sediment supply, sediment load evolution along fluvial networks, and denudation in active orogenic belts.” Tectonics, climate and landscape evloution, S. D. Willett, N. Hovius, M. T. Brandon, and D. Fisher, eds., Geological Society of America Special Paper 398, Geological Society of America, Boulder, Colo., 143–171.
Chang, H. H. (1988). Fluvial processes in river engineering, Wiley, New York.
Colebrook, F. (1939). “Turbulent flow in pipes with particular reference to the transition region between the smooth and rough pipe laws.” J. Inst. Civ. Eng. (London), 11, 133–156.
Kodama, Y. (1994a). “Downstream changes in the lithology and grain size of fluvial gravels, the Watarase River, Japan: Evidence of the role of abrasion in downstream fining.” J. Sediment Res., A64, 68–75.
Kodama, Y. (1994b). “Experimental study of abrasion and its role in producing downstream fining in gravel-bed rivers.” J. Sediment Res., A64, 76–85.
Kuenen, Ph. H. (1956). “Experimental abrasion of pebbles. II: Rolling by current.” J. Geol., 64, 336–368.
Lewin, J., and Brewer, P. A. (2002). “Laboratory simulation of clast abrasion.” Earth Surf. Processes Landforms, 27, 145–164.
Mikos, M., and Jaeggi, M. N. R. (1995). “Experiments on motion of sediment mixtures in a tumbling mill to study fluvial abrasion.” J. Hydraul. Res., 33, 751–772.
Niño, Y., and Garcia, M. (1994). “Gravel saltation. II: Modeling.” Water Resour. Res., 30(6), 1915–1924.
Niño, Y., Garcia, M., and Ayala, L. (1994). “Gravel saltation. I: Experiments.” Water Resour. Res., 30(6), 1907–1914.
Pettijohn, F. J. (1949). Sedimentary rocks, Harper and Bros, New York.
Schumm, S. A., and Stevens, M. A. (1973). “Abrasion in place: a mechanism for rounding and size reduction of coarse sediments in rivers.” Geology, 1, 37–40.
Sklar, L., and Dietrich, W. E. (1998). “River longitudinal profiles and bedrock incision models: stream power and the influence of sediment supply.” Rivers over rock, Fluvial processes in bedrock channels, K. Tinkler and E. E. Wohl, eds., American Geophysical Union Monograph, Washington, D.C., 107, 237–260.
Sklar, L. S., and Dietrich, W. E. (2001). “Sediment and rock strength controls on river incision into bedrock.” Geol. Soc. Am. Bull., 29, 1087–1090.
Information & Authors
Information
Published In
Journal of Hydraulic Engineering
Volume 132 • Issue 6 • June 2006
Pages: 624 - 628
Copyright
© 2006 ASCE.
History
Received: Jul 7, 2004
Accepted: Aug 19, 2005
Published online: Jun 1, 2006
Published in print: Jun 2006
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.