Experimental Investigation of Clear-Water Local Scour at Pile Groups
Publication: Journal of Hydraulic Engineering
Volume 132, Issue 10
Abstract
Experiments of local scour around pile groups are carried out under steady clear-water scour conditions. A variety of conditions including different pile group arrangements, spacing, flow rates, and sediment grain sizes are considered. In total, 112 experiments are carried out. It is observed that the scour-hole depth for some cases of pile groups increases as much as two times more than its magnitude for the case of single piles. The data from this study and some laboratory experiment data from previous works are used to derive a correction factor to predict the maximum local scour depth for the pile groups. Two well-known equations, i.e., Federal Highway Administration, Hydraulic Engineering Circular No. 18, HEC-18 (reported by Richardson and Davis in 2001) and the New Zealand pier scour equation (reported by Melville and Coleman in 2000) are considered. The prediction of scour hole based on the present correction agrees well with the observations.
Get full access to this article
View all available purchase options and get full access to this article.
References
Breusera, N. H. C., and Raudkivi, A. J. (1991). IAHR hydraulic structures design manual: Scouring, Vol. 2, Balkema, Rotterdam, The Netherlands.
Coleman, S. E. (2005). “Clear-water local scour at complex piers.” J. Hydraul. Eng., 131(4), 330–334.
Hannah, C. R. (1978). “Scour at pile groups.” Research Rep. No. 28-3, Civil Engineering Dept., Univ. of Canterbury, Christchurch, New Zealand.
Melville, B. W., and Chiew, Y. M. (1999). “Time-scale for local scour at bridge piers.” J. Hydraul. Eng., 125(1), 59–65.
Melville, B. W., and Coleman, S. E. (2000). Bridge scour, Water Resources, Colo.
Melville, B. W., and Sutherland, A. J. (1988). “Design method for local scour at bridge piers.” J. Hydraul. Eng., 114(10), 1210–1226.
Mia, Md. F., and Nago, H. (2003). “Design method of time-dependent local scour at a circular bridge pier.” J. Hydraul. Eng., 129(6), 420–427.
Raudkivi, A J., and Ettema, R. (1983). “Clear-water scour at cylindrical piers.” J. Hydraul. Eng., 109(3), 338–350.
Richardson, E. V., and Davis, S. R. (2001). “Evaluating scour at bridges.”Hydraulic Engineering Circular No. 18 (HEC-18), Rep. No. FHwA NHI 01-001, Federal Highway Administration, Washington, D.C.
Salim, M., and Jones, J. S. (1998). “Scour around exposed pile foundations.” Compilation of Conf. Scour Papers (1991–1998), ASCE, Reston, Va.
Sheppard, D. M., and Glasser, T. (2004). “Sediment scour at piers with complex geometries.” Proc., 2004 2nd Int. Conf. on Scour and Ero-sion, World Scientific, Singapore.
Yanmaz, A. M., and Altinbilek, H. D. (1991). “Study of time-dependent local scour around bridge piers.” J. Hydraul. Eng., 117(10), 1247–1268.
Zhao, G., and Sheppard, D. M. (1998). “The effect of flow skew angle on sediment scour near pile groups.” Compilation of Conf. Scour Papers (1991–1998), ASCE, Reston, Va.
Information & Authors
Information
Published In
Copyright
© 2006 ASCE.
History
Received: Nov 19, 2004
Accepted: Dec 16, 2005
Published online: Oct 1, 2006
Published in print: Oct 2006
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.