Shear Stress Distribution in Partially Filled Pipes
Publication: Journal of Hydraulic Engineering
Volume 129, Issue 9
Abstract
Boundary shear stresses have been calculated for circular pipes with a flat sediment bed using computational fluid dynamics (CFD). First of all, CFD simulations were carried out for rectangular channels in order to check the software package for its ability to reproduce experimental (literature) results. The influence of the applied turbulence model (isotropic or anisotropic) was also studied for rectangular channels. The simulations for circular pipes, using an isotropic turbulence model, were done for different filling ratios, mean flow velocities, and roughness heights. For validation, the numerical results were compared with former experimental work. With the help of the detailed shear stress distribution, sediment transport can be calculated more accurately than using the global shear stress, as is traditionally done. This method was applied to a simple flume experiment, subjected to a triangular inflow hydrograph, and the comparison with the traditional approach was made.
Get full access to this article
View all available purchase options and get full access to this article.
References
Bestawy, A. (1997). “Bed load transport and bed forms in steady and unsteady flow.” PhD dissertation, KULeuven, Belguim.
Cham, Limited. (1998). PHOENICS, version 3.1, Cham Limited, London.
Christensen, B., and Fredsoe, J. (1998). “Bed shear stress distribution in straight channels with arbitrary cross section.” Progress Rep. No. 77, Dept. of Hydrodynamics and Water Resources, TUDenmark, 13–29.
De Sutter, R., Huygens, M., and Verhoeven, R.(1999). “Unsteady flow sediment transport in a sewer model.” Water Sci. Technol., 39(9), 121–128.
Flintham, T. P., and Carling, P. A. (1988). “The prediction of mean bed and wall boundary shear in uniform and compositely rough channels.” Proc., Int. Conf. River Regime, Wiley, New York, 267–286.
French, R. H. (1985). Open channel hydraulics, McGraw-Hill, New York.
Fröhlich, G. R. (1985). “Über den Einfluss der Sohlform auf den Sandtransport bei geringen Feststoffkonzentrationen in teil—und vollgefüllten Rohrleitungen.” PhD dissertation, Univ. of Braunschweig, Germany.
Graf, W. H., Suszka, L., and Beguin, P. (1987). “Unsteady flow and its effect on sediment transport.” Annual Report, Ecole Polytechnique Fédérale de Lausanne, France.
Julien, P. Y. (1998). Erosion and sedimentation, Cambridge University Press, Cambridge, U.K.
Kabir, M. R. (1993). “Bed load transport in unsteady flow.” PhD dissertation, KULeuven, Belguim.
Khodashenas, S. R., and Paquier, A.(1999). “A geometrical method for computing the distribution of boundary shear stress across irregular straight open channels.” J. Hydraul. Res., 37(3), 381–388.
Kleijwegt, R. A. (1992). “On sediment transport in circular sewers with non-cohesive deposits.” PhD dissertation, TUDelft, The Netherlands.
Knight, D. W., Demetriou, J. D., and Hamed, M. E.(1984). “Boundary shear in smooth rectangular channels.” J. Hydraul. Eng., 110(4), 405–422.
Knight, D. W.(1981). “Boundary shear stress in smooth and rough channels.” J. Hydraul. Div., Am. Soc. Civ. Eng., 107(7), 839–851.
Knight, D. W., and Sterling, M.(2000). “Boundary shear in circular pipes running partially full.” J. Hydraul. Eng., 126(4), 263–275.
Kölling, C. (1994). “Finite-element simulation der Geschwindigkeitsverteilung in Kanälen und teilgefüllten Rohrleitungen.” PhD dissertation, Mitteilung No. 60, Tech. Univ. Munchen, Germany (in German).
Lundgren, H., and Jonsson, I. G.(1964). “Shear and velocity distribution in shallow channels.” J. Hydraul. Div., Am. Soc. Civ. Eng., 90(1), 1–21.
Naot, D., and Rodi, W.(1982). “Calculation of secondary currents in channel flow.” J. Hydraul. Div., Am. Soc. Civ. Eng., 108(8), 948–968.
Nezu, I., Tominaga, A., and Nakagawa, H.(1993). “Field measurements of secondary currents in straight rivers.” J. Hydraul. Eng., 119(5), 598–614.
Nikuradse, J. (1926). “Turbulente Strömung im Innern des rechteckigen offenen Kanals.” Forschungsarbeiten, Germany, Heft 281.
Perrusquia, G. (1991). “Bedload transport in storm sewers, stream traction in pipe channels.” Rep. Series A22, Dept. of Hydraulics, Chalmers Univ. of Technology, U.K.
Pizzuto, J. E.(1991). “A numerical model for calculating the distributions of velocity and boundary shear stress across irregular straight open channels.” Water Resour. Res., 27(9), 2457–2466.
Sterling, M. (1997). “A study of boundary shear stress, flow resistance, and mean flow structure in open channels with a circular cross section.” PhD dissertation, Univ. Birmingham, Ala.
Torfs, H. (1995). “Erosion of mud/sand mixtures.” PhD dissertation, KULeuven, Belgium.
Information & Authors
Information
Published In
Copyright
Copyright © 2003 American Society of Civil Engineers.
History
Received: Oct 29, 2001
Accepted: Feb 21, 2003
Published online: Aug 15, 2003
Published in print: Sep 2003
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.