Modeling Nonuniform Suspended Sediment Transport in Alluvial Rivers
Publication: Journal of Hydraulic Engineering
Volume 128, Issue 9
Abstract
Problems and difficulties in modeling sediment transport in alluvial rivers arise when one uses the theory of equilibrium transport of uniform sediment to simulate riverbed variation. A two-dimensional mathematical model for nonuniform suspended sediment transport is presented to simulate riverbed deformation. Through dividing sediment mixture into several size groups in which the sediment particles are thought to be uniform, the nonuniformity and the exchange between suspended sediment and bed material are considered. The change of concentration along the flow direction, size redistribution, and cross-sectional bed variation can then be described reasonably well by the model. In simulating the flow field with big dry-wet flats, moving boundary problems are solved very well by introducing a so-called finite-slot technique. Verification with laboratory data shows that the model has a good ability to simulate channel bed variations. Last, the model was applied to a real alluvial river system. Variables such as water level, sediment concentration, suspended sediment size distribution, and riverbed variation were obtained with encouraging results.
Get full access to this article
View all available purchase options and get full access to this article.
References
Armanini, A., and Di Silvio, G.(1988). “A one-dimensional model for the transport of a sediment mixture in nonequilibrium conditions.” J. Hydraul. Res., 26(3), 275–292.
Bagnold, R. A. (1966). “An approach to the sediment transport problem from general physics.” U.S. Geological Survey Professional Paper 422-I.
Bell, R. G., and Sutherland, A. J.(1983). “Nonequilibrium bedload transport by steady flows.” J. Hydraul. Eng., 109(3), 351–367.
Bhallamudi, S. M., and Chaudhry, M. H.(1991). “Numerical modeling of aggradation and degradation in alluvial channels.” J. Hydraul. Eng., 117(9), 1145–1164.
Celik, I., and Rodi, W.(1988). “Modeling suspended sediment transport in nonequilibrium situations.” J. Hydraul. Eng., 114(10), 1157–1191.
Galappatti, G., and Vreugdenhil, C. B.(1985). “A depth-integrated model for suspended sediment transport.” J. Hydraul. Res., 23(4), 359–377.
Gopalakrishnan, T. C.(1989). “A moving boundary circulation model for regions with tidal flats.” Int. J. Numer. Methods Eng., 28(2), 245–260.
Guo, Q. C. (2000). “Numerical modeling of suspended sediment transport.” PhD dissertation, Univ. of Regina, Regina, Canada.
Guo, Q. C., and Jin, Y. C.(1999a). “Modeling sediment transport using depth-averaged and moment equations.” J. Hydraul. Eng., 125(12), 1262–1269.
Guo, Q. C., and Jin, Y. C. (1999b). “Estimating the adjustment coefficient used in nonequilibrium sediment transport modeling.” Proc., Annual Conf., Canadian Society for Civil Engineering, Vol. II, 217–226.
Han, Q. W. (1980). “A study on nonequilibrium transport of suspended load.” Proc., Int. Symposium On River Sedimentation, Beijing, 793–802.
He, M. M., and Han, Q. W. (1986). “Mechanism and characteristics of nonuniform sediment transport.” Proc., 3rd Int. Symposium on River Sedimentation, Univ. of Mississippi, 844–853.
He, M. M., and Han, Q. W. (1989). “Concepts about grain size distributions of carrying capacity and effective bed material.” Shuli Xuebao, No. 3, 17–26 (in Chinese).
Holly, F. M., and Rahuel, J. L.(1990). “New numerical/physical framework for mobile modeling, Part 1: Numerical and physical principles.” J. Hydraul. Res., 28(4), 401–416.
Hu, S., and Kot, S. C.(1997). “Numerical model of tides in pearl river estuary with moving boundary.” J. Hydraul. Eng., 123(1), 21–29.
Park, I., and Jain, S. C.(1987). “Numerical simulation of degradation of alluvial channel beds.” J. Hydraul. Eng., 113(7), 845–859.
Patankar, S. V. (1980). Numerical heat transfer and fluid flow, McGraw-Hill, New York.
Rahuel, J. L., Holly, F. M., Chollet, J. P., Belleudy, P. J., and Yang, G.(1989). “Modeling of riverbed evolution for bedload sediment mixtures.” J. Hydraul. Eng., 115(11), 1521–1542.
Rubey, W. W. (1933). “Equilibrium conditions in debris-laden streams.” American Geophys. Union Trans., 14th Annual Meeting, 497–505.
Syvitski, J. P. M., and Alcott, J. M.(1995). “River 3: Simulation of river discharge and sediment transport.” Comput. Geosci., 21(1), 89–151.
van Rijn, L. C.(1986). “Mathematical modeling of suspended sediment in nonuniform flows.” J. Hydraul. Eng., 112(6), 433–455.
Yeh, K. C., Li, S. J., and Chen, W. L.(1995). “Modeling nonuniform-sediment fluvial process by characteristics method.” J. Hydraul. Eng., 121(2), 159–170.
Yen, C. L., Chang, S. Y., and Yuan, H. Y.(1992). “Aggradation-degradation process in alluvial channels.” J. Hydraul. Eng., 118(12), 1651–1669.
Wang, C. H., Han, Q. W., and Guo, Q. C. (1995). “Numerical simulation and investigation of the riverbed evolution of the reach below the Three gorges reservoir.” Rep. No. IWHR, Beijing (in Chinese).
Wang, L. X. (1987). “Composite-model of 1D and 2D flows.” Advanced course and workshop on mathematical modeling of alluvial river, IRTCES, Beijing.
Wuhan Univ. of Hydraulic and Electric Engineering (1990). River simulation, Water Resources and Electric Press (in Chinese).
Zinov’ev, A. T., Kopylov, Yu., N., and Kuz’min, A. A.(1995). “One-dimensional vertical model of the sedimentation process in a deep reservoir.” Water Res., 22(6), 625–632.
Information & Authors
Information
Published In
Copyright
Copyright © 2002 American Society of Civil Engineers.
History
Received: Dec 21, 1999
Accepted: Mar 19, 2002
Published online: Aug 15, 2002
Published in print: Sep 2002
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.