Relatively Rough Flow Resistance Equations
Publication: Journal of Hydraulic Engineering
Volume 128, Issue 6
Abstract
The definitions of depth and hydraulic radius become ambiguous when bed roughness is large relative to flow depth. Various statistics are currently used to describe bed roughness and many different flow resistance formulas have been developed. The volumetric hydraulic radius and the standard deviation of bed surface elevations are rational and unambiguous measures suitable for large relative roughness conditions. Their influence on flow resistance is investigated using conceptual models and digital elevation models of natural alluvial beds. The results show that head-losses for large-scale relative roughness beds can be related to the exponent of power-law flow resistance equations increases from 1/6 to more than 1/2 as relative roughness increases, and flow velocity can be determined from boundary topography measures, water level and slope, without any calibrated coefficients. An overlooked form of the log law, using standard deviation performs as well as power laws for predicting flow resistance with high relative roughness and it reverts to the conventional log law when relative roughness is low. A field technique for determining and is described.
Get full access to this article
View all available purchase options and get full access to this article.
References
Aberle, J., Dittrich, A., and Nestmann, F. (1999). “Description of steep stream roughness with the standard deviations S.” Proc., XXVIII IAHR Biennial Congress, Graz, Austria, on CDROM.
Arnold, P. E., Holland, G., McKerchar, A. I., and Soutter, W. R. (1988). Water Resources Survey Hydrologists Field Manual, DSIR Water Sciences Division, Wellington, New Zealand.
Bathurst, J. C., Li, R. M., and Simons, D. B.(1981). “Resistance equation for large-scale roughness.” J. Hydraul. Div., Am. Soc. Civ. Eng., 107(12), 1593–1613.
Bray, D. I., (1982). “Flow resistance in gravel bed rivers.” Gravel bed rivers, Hey et al., eds., Wiley, New York, 109–137.
Butler, J. B., Land, S. N., and Chandler, J. H.(1998). “Assessment of DEM quality for characterizing surface roughness using close range digital photogrammetry.” Photogramm. Record, 16(92), 271–291.
de Jong, C.(1994). “Using the K3 roughness coefficient for measuring spatial and temporal roughness variations.” Int. J. Sedim. Res., 9, 57–64.
de Jong, C.(1995). “Temporal and spatial interactions between river bed roughness, geometry, bed load transport and flow hydraulics in mountain streams—Examples from Squaw Creek (Montana, USA) and Lainbach/Schmiedlaine (Upper Bavaria, Germany) Berlin.” Geogr. Abh., 59, 1–229.
Dingman, S. L., and Sharma, K. P.(1997). “Statistical development and validation of discharge equations for natural channels.” J. Hydrol., 199, 13–35.
Ferro, V., and Giordano, G.(1991). “Experimental study of flow resistance in gravel-bed rivers.” J. Hydraul. Eng., 117(10), 1239–1246.
Gessler, J.(1990). “Friction factor of armored river beds.” J. Hydraul. Eng., 116(4), 531–543.
Hama, F. R.(1954). “Boundary-layer characteristics for smooth and rough surfaces.” Trans. Soc. Naval Arch. Mar. Eng., 62, 333–318.
Hicks, D. M., and Mason, P. D. (1991). Roughness characteristics of New Zealand rivers, Water Resources Survey, DSIR Marine and Freshwater, Wellington.
Jackson, P. S.(1981). “On the displacement height in the logarithmic velocity profile.” J. Fluid Mech., 111, 15–25.
Kellerhals, A. M.(1967). “Stable channels with gravel-paved beds.” J. Waterw. Harbors Div., Am. Soc. Civ. Eng., 93(WW1), 63–84.
Lillesand, T. M., and Kiefer, R. W. (1994). Remote sensing and image interpretation, 3rd Ed., Wiley, New York.
Monin, A. S., and Yaglom, A. M. (1971). Statistical fluid mechanics: Mechanics of turbulence, Vol. 1, MIT, Boston.
Nikora, V. I., and Goring, D. G.(2000). “Flow turbulence over fixed and weakly mobile gravel beds.” J. Hydraul. Eng., 126(9), 679–690.
Nikora, V. I., Goring, D. G., and Biggs, B. J. F.(1998). “On gravel-bed roughness characterisation.” Water Resour. Res., 43(2), 517–527.
Nikuradse, J., (1933). “Stroemumgsgesetze in raughen Roehren,” Forshungs Geg. des Ingenieurwesens, Heft 361 (translated from German as NACA Tech. Memo., 1292).
Press, W. H., Flannery, B. P., Teukolsky, S. A., and Vetterling, W. T. (1988). Numerical recipes in C, Cambridge University Press, Cambridge.
Robert, A.(1988). “Statistical analysis of sediment bed profiles in alluvial channels.” Math. Geol., 20, 205–225.
Smart, G. M.(1999a). “Turbulent velocity profiles and boundary shear in gravel-bed rivers.” J. Hydraul. Eng., 125(2), 106–116.
Smart, G. M. (1999b). “Coefficient of friction for flow resistance in alluvial channels with granular beds.” Water Maritime & Energy, Proc., Institute of Civil Engineers, U.K., 136(4), 205–210.
Smart, G. M. (2001). “A new roughness estimation technique for granular-bed flow resistance.” Proc., XXIX IAHR Hyd. Eng. Congress, Beijing.
Strickler. (1923). “Beitrage zur frage der geschwindigkeitsformel und der rauhigkeitszahlen fuer stroeme kanaele und geschlossene leitungen.” Mitteilungen des eidgenossischen Amtes fuer Wasserwirtschaft, Bern, Switzerland. N. 16 (in German).
Westaway, R. M., Lane, S. N., and Hicks, D. M.(2000). “Developmentof an automated correction procedure for digital photogrammetry for the study of wide, shallow gravel-bed rivers.” Earth Surf. Processes Landforms, 25, 209–226.
Whiting, P. J., and Dietrich, W. E.(1989). “The roughness of alluvial surfaces, an experimental examination of the influence of size heterogeneity and natural packing.” EOS Trans. Am. Geophys. Union, 70(43), 1109.
Willetts, B. B., Pender, G., and McEwan, I. K.(1998). “Experiments on the transport of graded sediments.” Proc. ICE Water Maritime Energy, 130(4), 212–225.
Wolman, M. G.(1954). “A method of sampling coarse river bed material.” Am. Geophys. Union Trans., 35, 951–956.
Information & Authors
Information
Published In
Copyright
Copyright © 2002 American Society of Civil Engineers.
History
Received: Jul 26, 2000
Accepted: Nov 28, 2001
Published online: May 15, 2002
Published in print: Jun 2002
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.