Effect of Speed on the Performance Characteristics of a Centrifugal Slurry Pump
Publication: Journal of Hydraulic Engineering
Volume 128, Issue 2
Abstract
The performance characteristics of a centrifugal slurry pump has been evaluated at three rotational speeds with water as well as solid-liquid mixtures of two materials to establish the applicability of affinity relations to these pumps. Measurements have shown that the standard affinity relations are applicable to these pumps under special conditions only. The relations for head and capacity are found to be applicable only at low solid concentrations, whereas application of affinity relation for input power gives significant errors, both with water and slurry, for substantial changes in the pump speed.
Get full access to this article
View all available purchase options and get full access to this article.
References
BS: 5316-Part 1. (1976). “Acceptance tests for centrifugal, mixed flow and axial pumps - Part 1. Class C tests.” Gr-8, British Standards Institution, London, U.K.
Bugliarello, G. (1963). “Some considerations on the analysis and design of hydraulic machinery for non-Newtonian fluids.” Proc., 10th IAHR Congress, London, 1–8.
Burgess, K. E., and Riezes, S. A.(1976). “The effect of sizing, specific gravity and concentration on the performance of centrifugal slurry pumps.” Proc. Inst. Mech. Eng., 190(36/76), 391–399.
Chand, P., Adinarayana, B., and Singh, R. P.(1985). “Effect of drag reducing polymers on slurry pump characteristics.” Bulk Solids Handling, 5(4), 807–811.
Fairbank, L. C. (1942). “Effect on the characteristics of centrifugal pumps.” Symposium Solids in Suspension, 107, Paper No. 2167, 1563–1586.
Gahlot, V. K., Seshadri, V., and Malhotra, R. C.(1992). “Effect of density, size distribution, and concentration of solid on the characteristics of centrifugal pumps.” J. Fluids Eng., 114(3), 386–389.
Gandhi, B. K. (1998). “Studies on performance and wear characteristics of centrifugal slurry pump handling concentrated multi-sized particulate slurries.” PhD thesis, Indian Institute of Technology at Delhi, India.
Gandhi, B. K., Singh, S. N., and Seshadri, V. (1998). “Applicability of affinity laws to centrifugal slurry pumps.” Proc., 3rd National Conf. on Fluid Machinery, Kirloskar Brothers Limited, Pune, India, 77–83.
Gandhi, B. K., Singh, S. N., and Seshadri, V. (1999). “Head and efficiency ratio characteristics of a centrifugal slurry pump.” Proc., 26th National Conf. of Fluid Mechanics and Fluid Power, Indian Institute of Technology, Kharagpur, India, 630–635.
Hunt, W. A., and Faddick, R. R. (1981). “The effect of solids on centrifugal pump characteristics.” Advances in solid-liquid flow in pipes and its application, I. Zandi, ed., Pergamon, New York, Paper No. 20, 281–288.
IS: 5120 (1988). “Technical requirements for rotodynamic special purpose pumps.”First revision, Bureau of Indian Standards, New Delhi, India.
Kazim, K. A. (1993). “Effects of solids on centrifugal pump characteristics.” PhD thesis, Indian Institute of Technology at Kharagpur, India.
Maz, W. (1984). “The influence of solids concentration, solids density and grain size distribution on the working behaviour of centrifugal pumps.” Hydrotransport 9, BHRA Fluid Engineering, Rome, Paper H1.
Mishra, R. (1996). “A study on the flow of multi-sized particulate solid-liquid mixtures in horizontal pipelines.” PhD thesis, Indian Institute of Technology at Delhi, India.
Osterwalder, J., and Ettig, C. (1977). “Determination of individual losses and scale effect by model tests with a radial pump.” Proc., Instn. Mech. Engrs. Conf. on Scaling for Performance Predictions in Rotodynamic Machines, Paper C185/77, Univ. of Sterling, UK, 105–111.
Sellgren, A. (1989). “Performance of a centrifugal pump when pumping ores and industrial minerals.” Hydrotransport 6, BHRA Fluid Engg., Canterbury, UK, Paper G1.
Stepanoff, A. J. (1958). Centrifugal and axial flow pumps: Theory, design and application, 2nd ed., Wiley, New York.
Stepanoff, A. J. (1965). Pumps and blowers, two phase flow—flow and pumping of solids in suspension and fluid mixtures, Wiley, New York.
Sutton, M. (1968). “Pump scale laws as affected by individual component losses.” Proc., Instn. Mech. Engrs. Symp. on Model Testing of Hydraulics Machinery and Associated Structures, Vol. 182, Pt. 3M, Cranfield, UK, Paper 10.
Vocaldo, J. J., Koo, J. K., and Prang, A. J. (1974). “Performance of centrifugal pumps in slurry service.” Hydrotransport 3, BHRA Fluid Eng., Colorado, Paper J2.
Walker, C. I., and Goulas, A. (1984). “Performance characteristics of centrifugal pumps when handling non-Newtonian homogeneous slurries.” Proc., Instn. Mech. Engrs. 198A(1), 41–49.
Wiedenroth, W. (1980). “The influence of sand and gravel on the characteristics of centrifugal pumps, some aspects of wear in hydraulic transportation installations.” Hydrotransport 1, BHRA Fluid Eng., Warwick, UK, Paper E1.
Wilson, K. C., Addie, G. R., and Clift, R. (1992). Slurry transport using centrifugal pumps, Elsevier Science, New York.
Information & Authors
Information
Published In
Copyright
Copyright © 2002 American Society of Civil Engineers.
History
Received: Feb 22, 2000
Accepted: Aug 7, 2001
Published online: Feb 1, 2002
Published in print: Feb 2002
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.