Rough Wall Boundary Layer on Plates in Open Channels
Publication: Journal of Hydraulic Engineering
Volume 128, Issue 10
Abstract
Experiments were performed to measure the characteristics of a turbulent boundary layer developing on a rough surface placed in an open channel flow at close proximity to the free surface. Streamwise velocity measurements were made with a one-component laser Doppler velocimeter system at the top of the spherical roughness elements. Measurements at three stations downstream of the plate leading edge show the growth of the boundary layer on the rough wall and its interaction with the exterior open-channel flow and the free surface. Resorting to the turbulence profile provides an alternative definition of the boundary layer thickness. The near-wall flow follows the well-known logarithmic law with a shift due to roughness. In the outer layer, there are two opposing effects: the free surface tends to decrease the wake component while the roughness tends to increase it. The streamwise turbulence intensity is affected by the shear and turbulence in the exterior flow, the effect of the free surface being greater than that of wall roughness.
Get full access to this article
View all available purchase options and get full access to this article.
References
Balachandar, R., and Ramachandran, S.(1999). “Turbulent boundary layers in low Reynolds number shallow open channel flows.” J. Fluids Eng., 121(3), 684–489.
Cardoso, A. H., Graf, W. H., and Gust, G.(1989). “Uniform flow in a smooth open channel.” J. Hydraul. Res., 27(5), 603–616.
George, J., and Simpson, R. L. (2000). “Some effects of sparsely distributed three-dimensional roughness elements on two-dimensional turbulent boundary layers.” 38th Aerospace Sciences Meeting and Exhibit, AIAA 2000-0915, Reno, Nev., 1–13.
Hoffman, J. A., and Mohammadi, K.(1991). “Velocity profiles for turbulent boundary layers under freestream turbulence.” J. Fluids Eng., 113(3), 399–404.
Kirkgoz, M. S., and Ardichoglu, M.(1997). “Velocity profiles of developing and developed open channel flow.” J. Hydraul. Eng., 123(12), 1099–1105.
Krogstad, P., and Antonia, R.(1999). “Surface roughness effects in turbulent boundary layers.” Exp. Fluids, 27, 450–460.
Krogstad, P., Antonia, R., and Browne, L.(1992). “Comparison between rough-and-smooth-walled turbulent boundary layers.” J. Fluid Mech., 245, 599–617.
Muste, M., and Patel, V. C.(1997). “Velocity profiles for particles and liquid in open-channel flow with suspended sediment.” J. Hydraul. Eng., 123(9), 742–751.
Nezu, I., and Nakagawa, H. (1993). Turbulence in open channel flows, IAHR Monograph, A. A. Balkema, Rotterdam, The Netherlands.
Nezu, I., and Rodi, W.(1986). “Open channel flow measurements with a laser doppler anemometer.” J. Hydraul. Eng., 112(5), 335–355.
Parthasarathy, R. N., and Muste, M.(1994). “Velocity measurements in asymmetric turbulent channel flows.” J. Hydraul. Eng., 120(9), 1000–1020.
Raupach, M. R., Antonia, R. A., and Rajagopalan, S.(1991). “Rough-wall turbulent boundary layers.” Appl. Mech. Rev., 44, 1–25.
Tachie, M., Bergstrom, D., and Balachandar, R.(2000). “Rough wall turbulent boundary layers in shallow open channel flow.” J. Fluids Eng., 122(3), 533–541.
Tachie, M. F., (2000). “Open channel turbulent boundary layers and wall jets on rough surfaces.” PhD thesis, Univ. of Saskatchewan, Canada.
White, F. (1999). Fluid mechanics, 4th Ed., WCB McGraw-Hill, New York.
Information & Authors
Information
Published In
Copyright
Copyright © 2002 American Society of Civil Engineers.
History
Received: Sep 26, 2001
Accepted: May 28, 2002
Published online: Sep 13, 2002
Published in print: Oct 2002
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.