Implicit Bidiagonal Scheme for Depth-Averaged Free-Surface Flow Equations
Publication: Journal of Hydraulic Engineering
Volume 126, Issue 6
Abstract
A general fast implicit bidiagonal numerical scheme, based on the MacCormack's predictor-corrector technique requiring the inversion of only block bidiagonal matrices, has been developed and subsequently applied for subcritical and supercritical free-surface flow calculations. The model has been applied to depth-averaged steady flows. There are two main advantages of the proposed method: the technique has fast convergence and utilizes a body fitted nonorthogonal local coordinate system to simulate irregular geometry flows. The model is used to analyze a wide variety of hydraulic engineering problems including flows in a converging-diverging subcritical flume, supercritical expansions at various Froude numbers, and supercritical converging chutes. For each of these test cases, the calculated results are compared with experimental data. The comparisons with measurements as well as with other numerical solutions show that the proposed method is comparatively accurate, fast, and reliable.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Berger, R. C., and Stockstill, R. L. (1995). “Finite-element model for high-velocity channels.”J. Hydr. Engrg., ASCE, 121(10), 710–716.
2.
Chapman, R. S., and Kuo, C. Y. (1985). “Application of two-equation κ-ε turbulence model to a two-dimensional, steady, free surface flow separation.” Int. J. Numer. Methods in Fluids, 5, 257–268.
3.
Elliot, R., and Chaudhry, M. H. (1992). “`A wave propagation model for two-dimensional dam-break flows.”J. Hydr. Res., Delft, The Netherlands, 30(4), 467–483.
4.
Fennema, R. J., and Chaudhry, M. H. (1989). “Implicit methods for two-dimensional unsteady free-surface flows.”J. Hydr. Res., Delft, The Netherlands, 27(3), 321–331.
5.
Lavante, von E., and Thompkins, W. T. (1982). “An implicit, bidiagonal numerical method for solving the Navier-Stokes equations.” AIAA J., 21(6), 828–833.
6.
MacCormack, R. W. (1982). “A numerical method for solving the equations of compressible viscous flow.” AIAA J., 20(9), 1275–1281.
7.
Molls, T., and Chaudhry, M. H. (1995). “Depth-averaged open-channel flow model.” J. Hydr. Engrg., ASCE, 121(6), 453–465.
8.
Molls T. Chaudhry, M. H., and Khan, R. W. (1995). “Numerical simulation of two-dimensional flow near a spur-dike.” Advances in Water Resour., 18(4), 227–236.
9.
Neilson, F. M. ( 1976). “Convex chutes in converging supercritical flow.” Miscellaneous Paper 17-76-19, U.S. Army Engineer Waterways Experiment Station, Vicksburg, Miss.
10.
Rahman, M., and Chaudhry, M. H. (1995). “Simulation of hydraulic jump with grid adaptation.”J. Hydr. Res., Delft, The Netherlands, 33(4), 555–569.
11.
Rouse, H., Bhoota, B. V., and Hsu, E.-Y. (1951). “Design of channel expansions.” Trans. ASCE, 116, 347–363.
12.
Soulis, J. V. (1991). “A numerical method for subcritical and supercritical open channel flow calculation.” Int. J. Numer. Methods in Fluids, 13, 437–464.
13.
Soulis, J. V. (1997). “Prediction performance of quasi-2D and 2D free-surface flow algorithms.” Proc., 7th Panellenic Congr. of the Greek Hydrotechnical Assn., Patras, Greece.
14.
Soulis, J. V., and Bellos, K. V. (1989). “Steady, supercritical, open channel flow computations.” Proc., 6th Int. Conf. on Numer. Methods in Laminar and Turbulent Flow, Swansea, U.K., 1493–1504.
15.
Stubbs, R. M. (1983). “Multiply-gridding of the Euler equations with an implicit scheme.” Proc., Computational Fluid Dyn. Conf., American Institute of Aeronautics and Astronautics, Reston, Va., 83–1945.
16.
Tingsanchali, T., and Maheswaran, S. (1990). “2-D depth-averaged flow computation near Groyne.”J. Hydr. Engrg., ASCE, 116(1), 71–86.
Information & Authors
Information
Published In
History
Received: May 11, 1998
Published online: Jun 1, 2000
Published in print: Jun 2000
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.