Evaluation of Fluctuating Pressures Measured with Connection Tubes
Publication: Journal of Hydraulic Engineering
Volume 124, Issue 4
Abstract
The dynamic characteristics of fluctuating pressure measuring systems composed of connection tubing and pressure transducers were analyzed. A method of correction for the effects of resonance and viscous damping on the measured pressure fluctuations was proposed. A mathematical model of the measuring system was formed combining the governing equations of the unsteady flow in the rigid connection tubing and the corresponding volumetric deformation in the transducer. Numerical solution of the governing equations were described. The phase shift between the velocity amplitude on the tube axis and the maximum wall shear stress was obtained from numerical solutions for a wide frequency range of sinusoidal pressure variations. Amplification and attenuation of sinusoidal pressure variations were given in terms of dimensionless parameters. An in situ dynamic calibration to obtain lumped compliance of the measuring system was described. The method was applied to correct the measured pressure fluctuations obtained from different sources. The mathematical and numerical model was successful in correcting amplification and attenuation occurring on different frequency bands of the same pressure record with random fluctuations.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Berg, H., and Tijdeman, H. (1965). “Theoretical and experimental results for the dynamic response of pressure measuring systems.” Nat. Aero. Astro. Res. Inst., Report NLR-TR F 238, Amsterdam, The Netherlands.
2.
Brown, F. T.(1962). “The transient response of fluid lines.”J. Basic Engrg., 84(4), 547–553.
3.
Donovan, F. M., Taylor, B. C., and Su, M. C.(1991). “One-dimensional computer analysis of oscillatory flow in rigid tubes.”J. Biomech. Engrg., ASME, 113, 476–484.
4.
Goodson, R. E., and Leonard, R. G. (1972). “A survey of modeling techniques for fluid line transients.”J. Basic Engrg., 474–482.
5.
Hanslow, D. J., Nielson, P., and Hibbert, K. (1994). “Measuring waves with manometer tubes.”Int. Conf. on Coastal Engrg., Kobe, Japan, Book of Abstracts, 420–421.
6.
Iberall, A. S.(1950). “Attenuation of oscillatory pressures in instrument lines.”J. Res. Nat. Bureau of Standards, 45, 85–108.
7.
Naudascher, E. (1991). Hydrodynamic forces. A. A. Balkema, Rotterdam, The Netherlands.
8.
Nielsen, P.(1989). “Analysis of natural waves by local approximations.”J. Wtrwy., Port, Coast. and Oc. Engrg., ASCE, 115(3), 384–396.
9.
Sanchez Bribiesca, J. L., and Fuentes Mariles, O. A.(1973). “Experimental analysis on macroturbulence effects on the lining of stilling basins.”Proc., 11th Int. Congress on Large Dams, Madrid, Spain, 2, 1575–1592.
10.
Schlichting, H. (1979). Boundary layer theory. McGraw-Hill, Inc., New York.
11.
Sleath, J. F. A. (1984). Sea bed mechanics. John Wiley & Sons, Inc., New York.
12.
Uchida, S.(1956). “The pulsating viscous flow superposed on the steady laminar motion of incompressible fluid in a circular pipe.”Zeit Angew Math. Phys., Basel, Switzerland, 7, 403–422.
13.
Woods, R. L., Hsu, C. H., and Chung, C. H. (1983). “Comparison of theoretical and experimental fluid line responses with source and load impedances.” Fluid transmission line dynamics special publication for ASME winter annual meeting, 1–36.
Information & Authors
Information
Published In
Copyright
Copyright © 1998 American Society of Civil Engineers.
History
Published online: Apr 1, 1998
Published in print: Apr 1998
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.