Modeling Fluvial Processes in Tidal Inlet
Publication: Journal of Hydraulic Engineering
Volume 123, Issue 12
Abstract
Small sandy tidal inlets of coastal lagoons usually exhibit dramatic changes in morphology under the interaction of storm flow and tidal exchange. While storm flow may keep the inlet open by flushing, the oscillating tidal flow contributes to a net sediment replenishment, or recharge, of the inlet channel. A numerical model has been developed to simulate the fluvial processes during inlet recharge. It provides the time and spatial variations of flow characteristics, sediment transport, and changes in channel morphology for the inlet channel during the recharge period. The model was applied to the inlet channel for the San Dieguito Lagoon in southern California. The recharge is elucidated by the simulated flow pattern that contributes to a net transport of beach sand into the channel. Time variations of the recharge rate were obtained. The total duration of recharge before inlet closure was found to be sensitive to the recharge rate which is affected by the supply of littoral sand. The simulated changes in channel morphology were substantiated by measurements. The study provided inlet opening durations that were used in assessing the enhancement in marine resource value by keeping the inlet open permanently.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Bruun, P. M., and Gerritsen, F.(1974). “Characteristics and behavior of Pacific coasts tidal inlets.”J. Wtrwy., Harb., and Coast. Engrg. Div., ASCE, 100(4), 389–397.
2.
Chang, H. H. (1988). Fluvial processes in river engineering. John Wiley & Sons, Inc., New York, N.Y.
3.
Chang, H. H. (1994). “Modeling of San Dieguito River fluvial process: model selection and calibration.”Prepared for Southern California Edison Co. Rep.
4.
Fread, D. L. (1974). “Numerical properties of implicit four-point finite difference equations of unsteady flow.”Tech. Memo. NWS Hydro-18, National Weather Service, NOAA.
5.
Inman, D. L. (1976). “Summary report on man's impact on the California coastal zone.”Prepared for Dept. of Navigation and Ocean Development, Sacramento, Calif.
6.
Johnson, J. W. (1973). “Characteristics and behavior of Pacific coast tidal inlets.”J. Wtrwy., Harb., and Coast. Engrg. Div., ASCE, 325–329.
7.
Mehta, A. J., and Joshi, P. B.(1988). “Tidal inlet hydraulics.”J. Hydr. Engrg., ASCE, 114(11), 1321–1338.
8.
O'Brien, M. P. (1971). “Notes on tidal inlets on sandy shores.”Technical Bulletin HEL 4-5, Hydr. Engrg. Lab., Univ. of California, Calif. (May).
9.
Van de Kreeke, J. (1992). “Stability of tidal inlets; Escoffier's analysis.”Shore and Beach, 9–12.
10.
Yang, C. T.(1973). “Incipient motion and sediment transport.”J. Hydraul. Div., ASCE, 99(10), 1679–1704.
11.
Yasuda, E. A., and Sheng, Y. P. (1994). “Use of three-dimensional hydrodynamics model for tidal inlets studies.”Coastal Engineering 1994, Proc. 24th Int. Conf., Coastal Engineering Research Council/ASCE, Kobe, Japan, Chapt. 248.
Information & Authors
Information
Published In
Journal of Hydraulic Engineering
Volume 123 • Issue 12 • December 1997
Pages: 1161 - 1165
Copyright
Copyright © 1997 American Society of Civil Engineers.
History
Published online: Dec 1, 1997
Published in print: Dec 1997
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.