Numerical Modeling of Anhui Debris Flow
This article has a reply.
VIEW THE REPLYPublication: Journal of Hydraulic Engineering
Volume 122, Issue 5
Abstract
A mathematical model is formulated to simulate dam-break transient debris flows, in which the debris and water mixture is assumed to be isotropic and continuous. In terms of its viscoelastoplasticity, a three-dimensional (3D) rheologic model for Bingham body is used to describe the relationship between the stress tensor and the rate of strain. Only the deformation caused by the deviatoric stress tensor is taken into account. Under the prior considerations, the governing equations for two-dimensional (2D) depth-averaged transient debris flows are obtained by integrating the equation of continuity and equations of motion over depth for 3D flows. To deal with the transient and high-speed features of dam-break debris flows, the derived governing equations are discretized and solved using the method of characteristics. The model is applied to simulate the dam-break debris flow of April 30, 1986, for the Jinshan debris reservoir in Anhui, China. The debris and water mixtures reach as far as 900 m downstream from the initial tailings dam site, with a depth of 1.7 m near the tailings dam and 1.0 m at 900 m downstream. These model results are in good agreement with the available observations.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Abbott, M. B. (1978). Computational hydraulics . Pitman Publishing Ltd., London, U.K.
2.
Jaeger, J. C., and Cook, N. G. W. (1979). Fundamentals of rock mechanics . Halsted Press, New York, N.Y.
3.
Jeyapalan, J. K., Duncan, J. M., and Seed, H. B.(1983a). “Analysis of flow failures of mine tailings dams.”J. Geotech. Engrg., ASCE, 109(2), 150–171.
4.
Jeyapalan, J. K., Duncan, J. M., and Seed, H. B.(1983b). “Investigation of flow failures of tailings dams.”J. Geotech. Engrg., ASCE, 109(2), 172–189.
5.
Kang, Z., and Zhang, S. (1980). “A preliminary analysis of the characteristics of debris flow.”Proc., Int. Symp. on River Sedimentation, Chinese Soc. for Hydr. Engrg., Beijing, China, 225–226.
6.
Qing, Z. (1988). “Mechanism on generation of semi-rocky high-speed landslides and review of bank-slide of the Longyang George Reservoir.”Chinese typical landslides, Science Press, Beijing, China (in Chinese).
7.
Ranalli, G. (1986). Rheology of the Earth . Allen & Unwin Inc., Winchester, Mass.
8.
Takahashi, T.(1978). “Mechanical characteristics of debris flows.”J. Hydr. Div., ASCE, 104(8), 1153–1169.
9.
Takahashi, T.(1981). “Debris flows.”Annu Rev. Fluid Mech., 13, 57–77.
10.
Wang, D. (1989). Computational hydraulics—theory and application, Hohai University Press, Nanjing, China (in Chinese).
11.
Wu, Q., and Wang, C. (1988). “Hugh semi-rocky landslide in Chana.”Chinese typical landslides, Science Press, Beijing, China (in Chinese).
12.
Zhen, Y. (1988). Elasto-visco-plasticity theory in rock mechanics . Mine Industry Press, Beijing, China (in Chinese).
Information & Authors
Information
Published In
Copyright
Copyright © 1996 American Society of Civil Engineers.
History
Published online: May 1, 1996
Published in print: May 1996
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.