Modeling Sediment in Gravel-Bedded Streams Using HEC-6
Publication: Journal of Hydraulic Engineering
Volume 122, Issue 10
Abstract
Analytical tools are needed to evaluate the environmental impacts of sediment loading on gravel-bedded rivers. The HEC-6 version 3.2 sediment transport model was evaluated to determine its applicability, at different physical-model scales, to sediment transport and bed-particle-size studies in gravel-bedded systems. Data from flume studies, a man-made canal in south-central Colorado, and a reach of a salmonid spawning river in central Idaho were used to evaluate HEC-6 predictions. Bed degradation was simulated successfully in a flume study. The trends in bed-surface armoring in flume and canal studies were simulated using sediment transport capacity functions based on critical thresholds for sediment movement. Sediment transport at the field scale was overestimated at low flows and underestimated at high flows. The calculated long-term flushing of sand-size particles from the bed substrate of a natural gravel-bedded river successfully approximated field measurements.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Alonso, C. V., Borah, D. K., and Prasad, S. N. (1981). “Stream channel stability: Numerical model for routing graded sediments in alluvial channels.”Appendix J, Project Objective 4, Prepared for U.S. Army Corps of Engrs., Vicksburg District, USDA Sedimentation Laboratory, Oxford, Miss.
2.
Alonso, C. V., and Combs, S. T.(1991). “Streambank erosion due to bed degradation—A model concept.”Trans. of ASAE, 33(4), 1239–1248.
3.
Ashida, K., and Michiue, M. (1971). “An investigation of river bed degradation downstream of a dam.”Proc., 14th Congr. of the Int. Assoc. for Hydr. Res., Societe Hydrotechnique, Paris, France, Vol. 3, 247–256.
4.
Gessler, J. (1970). “Beginning and ceasing of sediment motion.”Proc., Inst. of River Mech., Colorado State Univ., Fort Collins, Colo.
5.
Hydrologic Engineering Center (HEC). (1977). HEC-6 scour and deposition in rivers and reservoirs, users manual . U.S. Army Corps of Engrs., Davis, Calif.
6.
Lane, E. W., and Carlson, E. J. (1953). “Some factors affecting the stability of canals constructed in coarse granular materials.”Proc., IAHR-ASCE Int. Hydr. Convention, Int. Assoc. for Hydr. Res. (IAHR), Minneapolis, Minn., 37–48.
7.
MacArthur, R. C., Williams, D. T., and Thomas, W. A. (1990). “Status and new capabilities of computer program HEC-6: Scour and deposition in rivers and reservoirs.”Tech. Paper No. 129, U.S. Army Corps of Engrs., Davis, Calif.
8.
Platts, W. S., Shirazi, M. A., and Lewis, D. H. (1979). “Sediment particle sizes used by salmon for spawning with methods for evaluation.”EPA 600/3-79-043, U.S. Envir. Protection Agency, Envir. Res. Lab., Corvalis, Oreg.
9.
Platts, W. S., and Megahan, W. F. (1975). “Time trends in riverbed sediment composition in salmon and steelhead spawning areas: South Fork Salmon River, Idaho.”Trans., 40th North American Wildlife Natural Resour. Conf., Wildlife Mgmt. Inst., Washington, D.C.
10.
“Sedimentation Engineering.” (1975). ASCE Manual No. 54, V. A. Vanoni, ed., ASCE, New York, N.Y., 745.
11.
Suryanarayana, B. (1969). “Mechanics of degradation and aggradation in a laboratory flume,” PhD thesis, Dept. of Civ. Engrg., Colorado State Univ., Fort Collins, Colo.
12.
Theurer, F. D., Voos, K. A., and Miller, W. J. (1984). “Instream water temperature model.”Instream Flow Information Paper 16, FWS/OBS-84/15, U.S. Fish and Wildlife Service, U.S. Dept. of the Interior, Washington, D.C.
13.
Toffaleti, F. B. (1966). “A procedure for computation of total river sand discharge and detailed distribution bed to surface.”Tech. Rep. No. 5, Committee on Channel Stabilization, U.S. Army Corps of Engineers, Vicksburg, Miss.
14.
Wolman, M. G.(1954). “A method of sampling coarse river-bed material.”Trans. of the Am. Geophys. Union, 35(6), 951–956.
15.
Yang, C. T.(1973). “Incipient motion and sediment transport.”J. Hydr. Div., ASCE, 99(10), 1679–1704.
Information & Authors
Information
Published In
Copyright
Copyright © 1996 American Society of Civil Engineers.
History
Published online: Oct 1, 1996
Published in print: Oct 1996
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.