Design Relationship for Filters in Bed Protection
This article has a reply.
VIEW THE REPLYPublication: Journal of Hydraulic Engineering
Volume 120, Issue 9
Abstract
A simple design relationship is derived for the filter ratio of a stable geometrically open filter in a bed protection, the filter ratio here being defined as the ratio between the diameters of two layers, one on top of the other. The relationship is based on the assumption that the largest hydraulic loading in a bed protection is related to the hydraulic loading on the top layer. The stability of the top layer and the underlying layer under hydraulic loading is estimated using a Shields type relationship. The hydraulic gradient in the filter is derived from the time‐average hydraulic gradient, taking into account pressure fluctuations which determine the gradient fluctuations. The equation derived is compared with the results of published experimental work. This shows that the smaller the material needed for a stable bed protection, the higher the permissible filter ratio. Application of this result may lead to one or two filter layers less than required with a geometrically tight designed bed protection.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Atmatzidis, D. K. (1987). “An experimental study of sand migration in gravel.” Proc., IX Eur. Conf. on Soil Mech. and Found. Engrg. (ECSMFE) Groundwater effects in Geotech. Engrg., Balkema, Rotterdam, The Netherlands.
2.
Bezuijen, A., Klein Breteler, M., and Bakker, K. J. (1987). “Design criteria for placed block revetments and granular filters.” Proc.‐II, Int. Conf. on Coast. and Port Engrg. in Developing Countries, Beijing, China.
3.
Breusers, H. N. C. (1972). Pressure fluctuations in turbulent flow, S230. Delft Hydraulics, Delft, The Netherlands (in Dutch).
4.
de Graauw, A., van der Meulen, T., and Does de Bye M. v.d. (1983). “Design criteria for granular filters.” Delft Hydr., 287 (January).
5.
Hinze, J. O. (1975). Turbulence. McGraw‐Hill, Inc., New York, N.Y.
6.
Shields, A. (1936). “Anwendung der Ähnlichkeitsmechanik der Turbulenzforschung auf die Geschiebebewegung.” Mitt. der Preuss. Versuchsanstalt für Wasserbau und Schiffbau, Vol. 26, Berlin, Germany (in German).
7.
Wörman, A. (1989). “Riprap protection without filter layers.” J. Hydr. Engrg., ASCE, 115(12).
Information & Authors
Information
Published In
Copyright
Copyright © 1994 American Society of Civil Engineers.
History
Received: Jan 25, 1993
Published online: Sep 1, 1994
Published in print: Sep 1994
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.