Criteria for Evaluating Flow Classes in Alluvial Channels
Publication: Journal of Hydraulic Engineering
Volume 120, Issue 5
Abstract
Streambed and water‐surface configurations depend on flow characteristics, fluid characteristics, and sediment characteristics. These streambed and water‐surface configurations are called classes (regimes) of flow. The classes of flow have significant influence on velocity distribution, resistance to flow, rate of sediment transport, and stage discharge relationship. At present several categories of flow classes have been introduced. The most general categorization of flow classes is that of Vanoni, who in 1975 identified eight flow classes. In all the studies done so far it has been observed that there is a significant overlap between the adjoining flow classes. The demarcations between the various flow classes have been drawn by judgment; thus the separation of the various flow classes is subjective. In the present study, flow classes have been demarcated by using dimensionless parameters similar to those used with the Shields criterion of incipient motion. In so doing, a demarcation parameter was developed to demarcate various flow classes for sand‐bed alluvial channels.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Albertson, M. L., Simons, D. B., and Richardson, E. V. (1958). “Discussion of ‘Mechanics of ripple formation,’ by H. K. Liu.” J. Hydr. Div., ASCE, 84(1), 23–32.
2.
Brownlie, W. R. (1981). “Prediction of flow depth and sediment discharge in open channels.” Rep. No. KH‐R‐43A, W. M. Keck Laboratory, Caltech, Pasadena, Calif.
3.
Cooper, R. H., Allan, W. P., and Blench, T. (1972). “Critical review of sediment transport experiments.” J. Hydr. Div., ASCE, 98(5), 827–843.
4.
Einstein, H. A., and Barbarossa, N. (1952). “River channel roughness.” Trans., ASCE, 117, 1121–1146.
5.
Engelund, F. (1966). “Hydraulic resistance of alluvial streams.” J. Hydr. Div., ASCE, 92(2), 315–326.
6.
Fox, R. L. (1971). Optimization methods for engineering design. Addison‐Wesley Publishing Co., Reading, Mass., 43–44.
7.
Garde, R. J., and Albertson, M. L. (1959). “Sand waves and regimes of flow in alluvial channels.” Proc., IAHR, 8th Congress, IAHR, Montreal, Canada, 4, 7–13.
8.
Garde, R. J., and Ranga Raju, K. G. (1963). “Regime criteria for alluvial streams.” J. Hydr. Div., ASCE, 89(6), 153–164.
9.
Garde, R. J., and Ranga Raju, K. G. (1985). Mechanics of sediment transport and alluvial river problems. Wiley Eastern Ltd., New Delhi, India.
10.
Gilbert, G. K. (1914). “The transport of debris by running water.” USGS Professional Paper No. 86, U.S. Geological Survey, Washington, D.C.
11.
Raudkivi, A. J. (1967). “Analyses of resistance in fluvial channels.” J. Hydr. Div., ASCE, 93(5), 73–84.
12.
Shen, H. W. (1962). “Development of bed roughness in alluvial channels.” J. Hydr. Div., ASCE, 88(3), 45–58.
13.
Simons, D. B., and Senturk, F. (1977). Sediment transport technology. Water Resources Publications, Fort Collins, Colo.
14.
Swamee, P. K., and Ojha, C. S. P. (1991). “Bed load and suspended load transport of non‐uniform sediments.” J. Hydr. Engrg., ASCE, 117(6), 774–787.
15.
Vanoni, V. A. (1974). “Factors determining bed‐forms of alluvial streams.” J. Hydr. Div., ASCE, 100(3), 363–377.
Information & Authors
Information
Published In
Copyright
Copyright © 1994 American Society of Civil Engineers.
History
Received: Nov 14, 1991
Published online: May 1, 1994
Published in print: May 1994
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.