Turbulence Measurements in Open‐Channel Flows over Artificial Bed Forms
Publication: Journal of Hydraulic Engineering
Volume 119, Issue 3
Abstract
Measurements of mean and turbulence characteristics in uniform open‐channel flows of constant mean depth over artificial fixed one‐dimensional periodic bed features were obtained using two‐component laser‐Doppler velocimetry. Two types of bed forms, based on triangular elements of the same height (≈20% of the flow depth) and wavelength (≈12.5 times the height) but of different shape, were studied: (1) 45° triangle ridges separated by a flat region; and (2) triangular elements approximating dunes with a mildly sloping upstream face instead of a flat region. The role of the total shear velocity, based on the mean energy slope and the mean flow depth, as a possible velocity scale is studied. Velocity defect and the Reynolds shear stress profiles were generally well approximated by the flat‐bed profiles for regions of flow far from the bed. Sufficiently far from the recirculation and reattachment zones, turbulence characteristics collapsed fairly well when scaled with the total shear velocity over most of the depth, but do not follow the flat‐bed behavior in the lower part of the flow. Possible implications of the clear‐water measurements for the description of suspended sediment concentration profiles and total suspended load computations are explored.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Adams, E., and Eaton, J. (1988). “An LDA study of the backward facing step flow, including the effects of velocity bias.” J. Fluids Engrg., 110(Sept.), 275–282.
2.
Brooks, N. B. (1958). “Mechanics of streams with movable beds of find sand.” Trans., ASCE, 123, 526.
3.
de Ruiter, J. C. C. (1985). Turbulence measurements above fixed dunes. Delft Hydraulics, Delft, The Netherlands.
4.
Driver, D. M., and Seegmiller, H. L. (1985). “Features of a reattaching turbulent shear layer in divergent channel flow.” AIAA J., 23(2), 163–171.
5.
Durst, F., Melling, A. H., and Whitelaw, J. H. (1981). Principles and practice of laser‐Doppler anemometry. 2nd Ed., Academic Press, London, United Kingdom.
6.
Fredsoe, J. (1982). “Shape and dimensions of stationary dunes in rivers.” J. Hydr. Div., ASCE, 108(8), 932–497.
7.
Haque, M. I., and Mahmood, K. (1983). “Analytical determination of form friction factor.” J. Hydr. Engrg., 109(4), 590–610.
8.
Ikeda, S. (1980). “Suspended sediment on sand ripples.” 3rd Int. Symp. Stochastic Hydr., Tokyo, Japan.
9.
Lyn, D. A. (1988). “A similarity approach to sediment‐laden flows in open channels.” J. Fluid Mech., 193, 1–26.
10.
Lyn, D. A. (1992). “Turbulence characteristics in sediment‐laden open‐channel flows.” J. Hydr. Engrg., 118(7), 971–988.
11.
MacQuivey, R. S. (1973). “Summary of turbulence data from rivers, conveyance channels, and laboratory flumes.” Geological Survey Prof. Paper 802‐B, U.S. Govt. Printing Office, Washington, D.C.
12.
McLaughlin, D. K., and Tiedermann, W. G. (1973). “Biasing corrections for individual realization of laser‐anemometer measurements in turbulent flow.” Phys. Fluids, 16(12), 2082–2088.
13.
McLean, S. R., and Smith, J. D. (1986). “A model for flow over two‐dimensional bed forms.” J. Hydr. Engrg., 112(4), 300–317.
14.
Nakagawa, H., and Nezu, I. (1987). “Experimental investigation on turbulent structure of backward‐facing step flow in an open channel.” J. Hydr. Res., 25, 67–88.
15.
Nezu, I., and Rodi, W. (1986). “Open channel flow measurements with a laser‐Doppler anemometer.” J. Hydr. Engrg., 112(5), 335–355.
16.
Nezu, I., and Rodi, W. (1991). Discussion of “Uniform flow in a smooth open channel” by Cardoso et al., J. Hydr. Res., 29, 277–279.
17.
Raudkivi, A. J. (1963). “Study of sediment ripple formation.” J. Hydr. Div., ASCE, 89(6), 15–33.
18.
Sedimentation Engineering. (1975). ASCE, New York, N.Y.
19.
Smith, J. D., and McLean, S. R. (1977). “Spatially averaged flow over a wavy surface.” J. Geophy. Res., 82(12), 1735–1746.
20.
van Ingen, C. (1983). “A signal‐processing system for laser‐Doppler velocimetry in solid‐liquid flows.” UCB/HEL‐83/03, Hydr. Eng. Lab., Univ. of California, Berkeley, Calif.
21.
van Mierlo, M. C. L. M., and de Ruiter, J. C. C. (1988). “Turbulence measurements above artificial dunes.” Delft Hydraulics, Q789, Vols. 1 and 2, Jan. and March 1988.
22.
van Rijn, C. L. (1984). “Sediment transport, part II: Suspended load transport.” J. Hydr. Engr., 110(11), 1613–1641.
23.
Vanoni, V. A., and Hwang, L.‐S. (1967). “Relation between bed forms and friction in streams.” J. Hydr. Div., ASCE, 93(3), 121–144.
24.
Vanoni, V. A., and Nomicos, G. N. (1960). “Resistance properties of sedimentladen streams.” Trans., ASCE, 125, 1140–1175.
25.
White, F. M. (1986). Fluid mechanics. McGraw‐Hill, New York, N.Y.
26.
Yalin, M. S. (1972). Mechanics of sediment transport. Pergamon, Oxford, United Kingdom.
Information & Authors
Information
Published In
Copyright
Copyright © 1993 American Society of Civil Engineers.
History
Received: Apr 8, 1992
Published online: Mar 1, 1993
Published in print: Mar 1993
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.