Calibration Strategy for Urban Catchment Parameters
Publication: Journal of Hydraulic Engineering
Volume 118, Issue 11
Abstract
A simple and methodical strategy is presented for estimating the parameters of a catchment. The method makes use of rainfall‐runoff records to construct response surfaces of the peak flow in terms of eight calibration parameters. The eight calibration parameters are assumed to vary between certain physically meaningful limits and to be random and uniformly distributed between the limits. Experimental design techniques and the response surface methodology are used here. The response surfaces are fitted within the limits. Optimal values on the response surfaces that match the observed peak flows are then obtained using a probabilistic algorithm. The values obtained are optimal since at that point on the response surface the probability density is the highest. The average of the optimal sets obtained for various rainfall‐runoff records is an estimate of the catchment parameters. The estimated values are then verified on other storm runoff. The results obtained matched very well with the observed peak flow values.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Baffaut, C., and Delleur, J. W. (1989). “Expert system for calibrating SWMM.” J. Water Res., Ping, and Mgmt., ASCE, 115(3), 278–297.
2.
Chryssanthopoulos, M., Baker, M. J., and Dowling, P. J. (1987). “Reliability‐based design of stringer‐stiffened cylinders under axial compression.” Proc. 6th. Int. Offshore Mech. and Arctic Engrg. Symp., II, Mar., 403–411.
3.
Cochran, W. G., and Cox, G. M. (1964). Experimental designs. 2nd Ed., John Wiley and Sons, New York, N.Y.
4.
Draper, N. R., and Smith, H. (1981). “Applied regression analysis.” 2nd Ed., John Wiley and Sons, New York, N.Y.
5.
Grigoriu, M., and Ibrahim, Y. (1990). “Reliability analysis of uncertain linear dynamic systems based on response surface technique.” Proc. 1990 ASME Pressure Vessels and Piping Conf., T. H. Liu, ed., Jun. 17–21, 259–264.
6.
“HEC‐1.” (1981). Flood hydrograph package, U.S. Army Corps of Engineers, Davis, Calif.
7.
Huber, W. C. Heaney, J. P., Nix, S. J., Dickinson, R. E., and Polman, D. J. (1982). “Storm water management model.” User's manual, version III, U.S. Envir. Prot. Agency, Cincinnati, Ohio.
8.
Liong, S. Y., Chan, W. T., and Lum, L. H. (1991). “Knowledge based system for SWMM runoff component calibration.” J. Water Res. Plang. and Mgmt., ASCE, 117(5), 507–524.
9.
Madsen, H. O., Krenk, S., and Lind, N. C. (1986). Methods of structural safety, Prentice‐Hall Inc., N. J.
10.
Myers, R. (1971). Response surface methodology. Allyn and Bacon, Inc., Boston Mass.
11.
Rubinstein, R. Y. (1981). Simulation and the Monte Carlo method. John Wiley and Sons, New York, N.Y.
12.
Veneziano, D., Casciati, F., and Faravelli, L. (1983). “Method of seismic fragility for complicated systems.” Proc. 2nd. CSNI Specialist Meeting on Probabilistic Methods in Seismic Risk Assessment for Nuclear Power Plants, Committee on the Safety of Nuclear Installations, May, 67–88.
13.
Wong, F. S. (1984). “Uncertainties in dynamic soil‐structure interaction.” J. Engrg. Mech., ASCE, 110(2), 308–324.
14.
Wu, Y.‐T., and Wirsching, P. H. (1984). “Advanced reliability method for fatigue analysis.” J. Engrg. Mech., ASCE, 110(4), 536–553.
Information & Authors
Information
Published In
Copyright
Copyright © 1992 ASCE.
History
Published online: Nov 1, 1992
Published in print: Nov 1992
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.