Ground Response of Circular Tunnel in Poorly Consolidated Rock
Publication: Journal of Geotechnical Engineering
Volume 122, Issue 9
Abstract
To study the surface-closure curve of a circular tunnel in poorly consolidated rocks, closed-form solutions for stresses and displacement near a circular opening subjected to a uniformly distributed external stress and internal pressure are obtained. An elastoplastic model incorporating the nonlinear Hoek-Brown criterion is used, as most poorly consolidated geomaterials display a nonlinear correlation for the strength curve. Because most existing closed-form solutions as such were obtained with a linear Mohr-Coulomb criterion, the proposed solution is compared to those results by the linear criterion to evaluate the possible effect of the linear assumption. It is concluded that the calculated results by the linear Mohr-Coulomb criterion may overestimate the surface closure in low normal stress, but underestimate the opening closure under high normal stress. For the nonlinear case, a comparison is also made between the results by using the associated flow rule for plastic deformation and by a nonassociated flow rule. It is shown, by comparing the calculated results with an experimental result, that a nonassociated flow rule should be used in general. It is suggested that a nonlinear yield criterion be used with a nonassociated flow rule to achieve an appropriate prediction for the opening surface-closure curve.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Agar, J. G., Morgenstern, N. R., and Scott, J. D. (1985). “Shear strength and stress-strain behaviour of Athabasca oil sand at elevated temperatures and pressures. Can. Geotech. J., 24(1), 1–10.
2.
Brown, E. T., Bray, J. W., Ladanyi, B., and Hoek, E.(1983). “Ground response curves for rock tunnels.”J. Geotech. Engrg., ASCE, 109, 15–39.
3.
Detournay, E., and Fairhurst, C.(1987). “Two-dimensional elastoplastic analysis of a long, cylindrical cavity under non-hydrostatic loading.”Int. J. Rock Mech. Mineral Sci. and Geomech. Abstract, 24, 197–211.
4.
Dusseault, M. B., and Morgenstern, N. R.(1978). “Shear strength of Athabasca oil sands.”Can. Geotech. J., 15, 216–238.
5.
Florence, A. L., and Schwer, L. E.(1978). “Axisymmetric compression of a Mohr-Coulomb medium around a circular hole.”Int. J. Numer. and Analytical Methods in Geomech., 2(4), 367–379.
6.
Hoek, E., and Brown, E. T.(1980). “Empirical strength criterion for rock masses.”J. Geotech. Engrg. Div., ASCE, 106(9), 1013–1035.
7.
Jaeger, J. C., and Cook, N. G. W. (1979). Fundamentals of rock mechanics . Chapman & Hall, London, U.K.
8.
Jain, S. K. (1980). Fundamental aspects of the normality rule and their role in deriving constitutive laws of soils . Virginia Polytechnic Inst. and State Univ., Blacksburg, Va.
9.
Remvik, F. (1993). “Aspects of shale behaviour in the petroleum industry,” PhD thesis, The Norwegian Inst. of Technol., The Univ. of Trondheim, Norway.
10.
Santarelli, F. J. (1987). “Theoretical and experimental investigation of the stability of the axisymmetric borehole,” PhD thesis, Univ. of London, London, U.K.
11.
Senseny, P. E., Lindberg, H. E., and Schwer, L. E.(1989). “Elastic-plastic response of a circular hole to repeated loading.”Int. J. Numer. and Analytical Methods in Geomech., 13, 459–476.
12.
Wang, Y.(1994). “The effect of a nonlinear Mohr-Coulomb criterion on borehole stresses and damage-zone estimate.”Can. Geotech. J., 31, 104–109.
Information & Authors
Information
Published In
Copyright
Copyright © 1996 American Society of Civil Engineers.
History
Published online: Sep 1, 1996
Published in print: Sep 1996
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.