Role of Topography and Anisotropy When Selecting Unlined Pressure-Tunnel Alignment
Publication: Journal of Geotechnical Engineering
Volume 121, Issue 12
Abstract
This paper shows how analytical solutions, proposed by the writers to predict in-situ stresses in rock masses with smooth and irregular topographies, can help in the selection of the alignment of unlined pressure tunnels near slopes and valley walls. The proposed methodology can be applied to ridges and valleys in isotropic or anisotropic rock masses subject to gravity or to combined gravitational and tectonic loading. The analytical solutions are two-dimensional and assume plane or generalized plane strain. They can be used to substitute existing design charts for pressure tunnels based on the finite-element method. It is found that the safe alignment of unlined pressure tunnels depend greatly on the extent of tensile regions in valley walls, which itself depends on parameters such as valley geometry, the degree of rock anisotropy, the orientation of the planes of rock anisotropy, and the in-situ loading conditions (gravity, gravity and tectonic).
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Akhpatelov, D. M., and Ter-Martirosyan, Z. G.(1971). “The stressed state of ponderable semi-infinite domains.”Armenian Acad. Sci. Mech. Bull., 24(3), 33–40.
2.
Brekke, T., and Ripley, B. D. (1993). “Design of pressure tunnels and shafts.”Comprehensive rock engineering, J. A. Hudson, ed., Pergamon Press, Inc., Elmsford, N.Y., 349–369.
3.
Broch, E.(1984a). “Development of unlined pressure shafts and tunnels in Norway.”Underground Space, 8(3), 177–184.
4.
Broch, E.(1984b). “Unlined high pressure tunnels in areas of complex topography.”Water Power and Dam Constr., 36(11), 21–23.
5.
Chaplow, R., and Eldred, C. D. (1984). “Geotechnical investigations for the design of an extension to the Kariba South underground power station, Zimbabwe.”Proc., ISRM Symp. on Des. and Perf. of Underground Excavations, E. T. Brown and J. A. Hudson, ed., British Geotech. Soc., London, England, 213–219.
6.
Enever, J. R., Wold, M. B., and Walton, R. J. (1992). “Geotechnical investigations for the assessment of the risk of water leakage from pressure tunnels.”Proc., 6th Australia-New Zealand Conf. on Geomech.
7.
Haimson, B. C. (1984). “Pre-excavation in situ stress measurements in the design of large underground openings.”Proc., ISRM Symp. on Des. and Perf. of Underground Excavations, E. T. Brown and J. A. Hudson, eds., British Getech. Soc., London, England. 183–190.
8.
James, P. (1991). “Stress and strain during river downcutting.”Australian Geomech., 28–31.
9.
Judd, W. R. (1964). “Rock stress, rock mechanics and research, in state of stress in the earth's crust. Proc., Int. Conf. on State of Stress in Earth' Crust, Elsevier, Appl. Sci., New York, N.Y. 5–54.
10.
Knill, J. L. (1968). “Geotechnical significance of some glacially induced rock discontinuities.”Bull. Assoc. Engrg., Geology, Vol. 5, 49–62.
11.
Liao, J. J., Savage, W. Z., and Amadei, B. (1992). “Gravitational stresses in anisotropic ridges and valleys with small slopes.”J. Geophys. Res., 97(B3), 3325–3336.
12.
Liu, L., and Zoback, M. D. (1992). “The effect of topography on the state of stress in the crust: application to the site of the Cajon Pass Scientific Drilling Project.”J. Geophys. Res., 97(B4), 5095–5108.
13.
McTigue, D. F., and Mei, C. C. (1981). “Gravity-induced stresses near topography of small slope.”J. Geophys. Res., 86(B10), 9268–9278.
14.
McTigue, D. F., and Mei, C. C.(1987). “Gravity-induced stresses near axisymmetric topography of small slope.”Int. J. Numer. and Anal. Methods in Geomech., 11(3), 257–268.
15.
McTigue, D. F., and Stein, R. S. (1984). “Topographic amplification of tectonic displacement: implications for geodetic measurement of strain changes.”J. Geophys. Res., Vol. 89, 1123–1131.
16.
Matheson, D. S., and Thomson, S. (1973). “Geological implications of valley rebound.”Can. J. Earth Sci., Vol. 10, 961–978.
17.
Molinda, M., Heasley, K. A., Oyler, D. C., and Jones, J. R. (1992). “Effects of horizontal stress related to stream valleys on the stability of coal mine openings.”BuMines RI 9413, U.S. Bureau of Mines, U.S. Dept. of Interior, Washington, D.C.
18.
Myrvang, A. M. (1993). “Rock stress and rock stress problems in Norway.”Comprehensive rock engineering, J. A. Hudson, ed., Pergamon Press, Inc., Elmsford, N.Y., 461–471.
19.
Pan, E., and Amadei, B.(1993). “Gravitational stresses in long asymmetric ridges and valleys in anisotropic rock.”Int. J. of Rock Mech. and Min. Sci., & Geomech. Abstr., 30(7), 1005–1008.
20.
Pan, E., and Amadei, B.(1994). “Stresses in an anisotropic rock mass with irregular topography.”J. Engrg. Mech., ASCE, 120(1), 79–119.
21.
Pan, E., Amadei, B., and Savage, W. Z.(1994). “Gravitational stresses in long symmetric ridges and valleys in anisotropic rock.”Int. J. of Rock Mech. and Min Sci. & Geomech. Abstr., 31(4), 293–312.
22.
Pan, E., Amadei, B., and Savage, W. Z.(1995). “Gravitational and tectonic stresses in anisotropic rock with irregular topography.”Int. J. Rock Mech. and Min. Sci. & Geomech. Abstr., 32(3), 201–214.
23.
Price Jones, A., and Sims, G. P. (1984). “Measurement of in-situ rock stresses for a hydro-electric scheme in Peru.”Proc., ISRM Symp. on Des. and Perf. of Underground Excavations, E. T. Brown and J. A. Hudson, eds., British Geotech. Soc., London, England, 191–198.
24.
Savage, W. Z.(1994). “Gravity induced stresses in finite slopes.”Int. J. of Rock Mech. and Min. Sci. & Geomech. Abstr., 31(5), 471–483.
25.
Savage, W. Z., and Swolfs, H. S. (1986). “Tectonic and gravitational stress in long symmetric ridges and valleys.”J. Geophys. Res., 91(B3), 3677–3685.
26.
Savage, W. Z., Swolfs, H. S., and Powers, P. S.(1985). “Gravitational stress in long symmetric ridges and valleys.”Int. J. of Rock Mech. and Min. Sci. & Geomech. Abstr., 22(5), 291–302.
27.
Selmer-Olsen, R. (1974). “Underground openings filled with high pressure water or air.”Bull. Int. Assoc. Engrg. Geology, Vol. 9, 91–95.
28.
Sharma, V. M., Singh, R. B., Kuberan, R., Moza, K. K., and Sharma, T. (1991). “In-situ stress measurement for design of tunnels.”Proc., 7th Congr. Int. Soc. Rock Mech. (ISRM); Vol. 2, A. A. Balkema, Rotterdam, The Netherlands, 1355–1358.
29.
Silvestri, V., and Tabib, C. (1983a). “Exact determination of gravity stresses in finite elastic slopes. I: Theoretical considerations.”Can. Geotech. J., Ottawa, Canada, Vol. 20, 47–54.
30.
Silvestri, V., and Tabib, C. (1983b). “Exact determination of gravity stresses in finite elastic slopes. Part II: Applications.”Can Geotech. J., Ottawa, Canada, Vol. 20, 55–60.
31.
Ter-Martirosyan, Z. G., and Akhpatelov, D. M. (1972). “The stressed state of an infinite slope with a curvilinear boundary subject to a field of gravity and percolation.”J. Probl. Geomech., Vol. 5, 81–91.
32.
Ter-Martirosyan, Z. G., Akhpatelov, D. M., and Manvelyan, R. G. (1974). “The stressed state of rock masses in a field body forces.”Proc., 3rd ISRM Congr., Part A, 569–574.
Information & Authors
Information
Published In
Copyright
Copyright © 1995 American Society of Civil Engineers.
History
Published online: Dec 1, 1995
Published in print: Dec 1995
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.