Evaluation of Soil Liquefaction by Energy Principles
This article has a reply.
VIEW THE REPLYThis article has a reply.
VIEW THE REPLYPublication: Journal of Geotechnical Engineering
Volume 120, Issue 9
Abstract
Liquefaction has been a source of major damage during severe earthquakes. During the past two decades researchers have attempted to determine the parameters that could better define the liquefaction potential of a soil deposit. The use of the energy concept to define the liquefaction potential is validated through laboratory tests on sand specimens. Numerous tests were conducted at several confining pressures, relative densities, and strain amplitudes using a torsional shear, hollow cylinder device; and the energy per unit volume required for liquefaction was measured. Relationships were developed between the energy per unit volume and the various parameters that were varied during the tests. The dissipated‐energy‐per‐unit‐volume approach is very promising and can accommodate nonuniform loading present in earthquake spectra.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Bhatia, K. S., Schwab, J., and Ishibashi, I. (1985). “Cyclic simple shear, torsional shear and triaxial—a comparative study.” Proc., Advances in the Art of Testing Soils Under Cyclic Conditions, ASCE, New York, N.Y.
2.
Berrill, J. B., and Davis, R. O. (1985). “Energy dissipation and seismic liquefaction of sands: revised model.” Soils and Found., 25(2), 106–118.
3.
Davis, R. O., and Berrill, J. B. (1982). “Energy dissipation and seismic liquefaction in sands.” Earthquake Engrg. and Struct. Dynamics, 10(1), 59–68.
5.
Dobry, R., Ladd, R. S., Yokel, F. Y., Chung, R. M., and Powell, D. (1982). “Prediction of pore water pressure buildup and liquefaction of sands during earthquakes by the cyclic strain method.” Build. Sci. Series 138, National Bureau of Standards, U.S. Department of Commerce, Washington, D.C.
6.
Duke, C. M., and Leeds, D. J. (1963). “Response of soils, foundations and earth structures to the Chilean earthquake of 1960.” Bull., Seismological Society of America, 63(2).
7.
Figueroa, J. L. (1990). “A method for evaluating soil liquefaction by energy principles.” Proc., 4th U.S. Nat. Conf. on Earthquake Engrg., Earthquake Engineering Research Institute, Palm Springs, Calif.
8.
Figueroa, J. L., and Dahisaria, M. N. (1991). “An energy approach in defining soil liquefaction.” Proc., 2nd Int. Conf. on Recent Advances in Geotech. Earthquake Engrg. and Soil Dynamics, University of Missouri‐Rolla, Rolla, Mo.
9.
Japan National Commission on Earthquake Engineering. (1965). “Niigata earthquake of 1964.” (1965). Proc., 3rd World Conf. on Earthquake Engrg., Auckland, New Zealand.
10.
Law, K. T., Cao, Y. L., and He, G. N. (1990). “An energy approach for assessing seismic liquefaction potential.” Can. Geotech. J., 27(3), 320–329.
11.
Marsal, R. J. (1961). “Behavior of a sandy uniform soil during the Jaltipan earthquake, Mexico.” Proc., 5th Int. Conf. on Soil Mech. and Found. Engrg., Dunod, Paris, France.
12.
Martin, R. G., Finn, L. W., and Seed, H. B. (1975). “Fundamentals of liquefaction under cyclic loading.” J. Soil Mech. and Found. Div., ASCE, 101(5), 423–438.
13.
Nemat‐Nasser, S., and Shakooh, A. (1979). “A unified approach to densification and liquefaction of cohesionless sand in cyclic shearing.” Can. Geotech. J., 16(4), 659–678.
14.
Prakash, S. (1981). Soil dynamics. McGraw‐Hill, New York, N.Y.
15.
Saada, A. S. (1986). “State of the Art Paper Hollow Cylinder Torsional Devices: Their Advantages and Limitations.” ASTM, STP 977, Proc., Symp. on Advanced Triaxial Testing of Soil and Rock, ASTM, Philadelphia, Pa., 766–789.
16.
Saada, A. S., and Townsend, F. C. (1981). “State of the art: laboratory strength testing of soils.” ASTM, STP 740, Philadelphia, Pa.
17.
Seed, H. B., and Idriss, I. M. (1971). “Simplified procedure for evaluating soil liquefaction potential.” J. Soil Mech. and Found. Div.,ASCE, 97(9), 1249–1274.
18.
Silver, M. L., and Seed, H. B. (1971). “Volume changes in sands during cyclic loading.” J. Soil Mech. and Found. Div., ASCE, 97(9), 1171–1182.
19.
Simcock, J., Davis, R. O., Berrill, J. B., and Mallenger, G. (1983). “Cyclic triaxial tests with continuous measurement of dissipated energy.” Geotech. Testing J., 6(1), 35–39.
Information & Authors
Information
Published In
Copyright
Copyright © 1994 American Society of Civil Engineers.
History
Received: Apr 18, 1991
Published online: Sep 1, 1994
Published in print: Sep 1994
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.