Analysis of Earthquake Fault Rupture Propagation through Cohesive Soil
Publication: Journal of Geotechnical Engineering
Volume 120, Issue 3
Abstract
An improved understanding of earthquake fault rupture propagation through saturated clay would assist engineers in siting and designing facilities to be constructed in regions where cohesive soils overlie potentially active faults. The results from numerical analyses suggest that the finite‐element method can be applied to this class of problem provided that the soil's nonlinear stress‐strain behavior is adequately modeled. It was found that the height of the shear rupture zone in the overlying saturated clay soil at a specified base rock fault displacement depends primarily on the soil's failure strain. As the clay's failure strain decreases, the shear rupture zone in the clay overlying the bedrock fault propagates further at a specified base displacement. Other material parameters such as soil shear strength and stiffness also affect the fault rupture process, but not to the extent of failure strain. The orientation of the shear rupture zone through the soil depends largely on the orientation of the underlying bedrock fault plane.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Boulanger, R. W., Bray, J. D., Chew, S. H., Seed, R. B., Duncan, J. M., and Mitchell, J. K. (1991). “SSCOMPPC: a finite element analysis program for geotechnical analysis of soil‐structure interaction, earth dams, and compaction effects.” Geotech. Engrg. Rep. UCB/GT/90‐02, University of California, Berkeley, Calif.
2.
Bray, J. D., Seed, R. B., and Seed, H. B. (1993). “1g small‐scale modelling of saturated cohesive soils.” Geotech. Testing J., 16(1), 46–53.
3.
Bray, J. D., Seed, R. B., Cluff, L. S., and Seed, H. B. (1994). “Earthquake fault rupture propagation through soil.” J. Geotech. Engrg., ASCE, 120(3), 562–580.
4.
Burridge, P. B. (1987). “Failure of slopes,” PhD thesis, California Institute of Technology, Pasadena, Calif.
5.
Cole, D. A. Jr., and Lade, P. V. (1984). “Influence zones in alluvium over dip‐slip faults.” J. Geotech. Engrg., ASCE, 110(5), 599–615.
6.
Cundall, P. (1976). “Explicit finite‐difference methods in geomechanics.” Proc., 2nd Int. Conf. Num. Meth. Geomech., ASCE, New York, N.Y., 132–150.
7.
Davie, J. R. (1973). “Behavior of cohesive soils under uplift forces,” PhD thesis, University of Glasgow, Scotland.
8.
Duncan, J. M., Byrne, P., Wong, K. S., and Mabry, P. (1980). “Strength, stress‐strain and bulk modulus parameters for finite element analyses of stresses and movements in soil masses.” Rep. UCB/GT/80‐01, University of California, Berkeley, Calif.
9.
Duncan, J. M., and Lefebvre, G. (1973). “Earth pressure on structures due to fault movement.” Meeting Preprint #1949; ASCE Nat. Struct. Engrg. Meeting, New York, N.Y., 1–24.
10.
Roth, W. H., Kalsi, G., Papastamatiou, O., and Cundall, P. A. (1982). “Numerical modelling of fault propagation in soils.” Proc., 4th Int. Conf. on Num. Meth. Geomech., A. A. Balkema, Rotterdam, The Netherlands, 487–502.
11.
Roth, W. H., Scott, R. F., and Austin, I. (1981). “Centrifuge modeling of fault propagation through alluvial soils.” Geophys, Res. Letters, 8(6), 561–564.
12.
Scott, R. F. (1987). “Failure.” Geotechnique, London, England, 37(4), 423–466.
13.
Scott, R. F., and Schoustra, J. J. (1974). “Nuclear power plant siting on deep alluvium.” J. Geotech. Engrg. Div., ASCE, 100(4), 449–459.
14.
Sutherland, H. B. (1988). “Uplift resistance of soils.” Geotechnique, London, England, 38(4), 493–516.
15.
Taylor, R. L. (1987). “PCFEAP—a personal computer finite element analysis program.” Manual, University of California, Berkeley, Calif.
16.
Walters, J. V., and Thomas, J. N. (1982). “Shear zone development in granular materials.” Proc., 4th Int. Conf. Num. Meth. Geomech., Edmonton, Canada, Vol. I, 263–274.
17.
Zienkiewicz, O. C. (1977). The finite element method, 3rd Ed., McGraw‐Hill (UK) Ltd., London, England.
Information & Authors
Information
Published In
Copyright
Copyright © 1994 American Society of Civil Engineers.
History
Received: Feb 6, 1992
Published online: Mar 1, 1994
Published in print: Mar 1994
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.