Formulation of MIT‐E3 Constitutive Model for Overconsolidated Clays
Publication: Journal of Geotechnical Engineering
Volume 120, Issue 1
Abstract
This paper presents a generalized effective stress model for describing the rate‐independent behavior of normally to moderately overconsolidated clays (with OCRs less than 8) that exhibit normalized behavior. The model formulation comprises three components: (1) An elastoplastic model for normally consolidated clay including anisotropic and strain‐softening behavior; (2) equations to describe the small strain nonlinearity and hysteretic response in unloading and reloading; and (3) bounding surface plasticity for irrecoverable, anisotropic, and path‐dependent behavior of overconsolidated clays. Model complexity is controlled through the use of input parameters that can be obtained from a small number of standard soil tests. A complete procedure is described to select the input parameters for a given clay. A detailed assessment of the predictive capabilities and limitations of the proposed model is presented in a companion paper.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Anandarajah, A. M., and Dafalias, Y. F. (1986). “Bounding surface plasticity III: Application to anisotropic cohesive soils.” J. Engrg. Mech., ASCE, 112(12), 1292–1318.
2.
Azzouz, A. S., Malek, A. M., and Baligh, M. M. (1989). “Cyclic behavior of clays in undrained simple shear.” J. Geotech. Engrg., ASCE, 115(5), 637–657.
3.
Dafalias, Y., and Herrmann, G. R. (1982). “Bounding surface formulation of soil plasticity.” Soil Mechanics, Transient and Cyclic Loads, G. N. Pande and O. C. Zienkiewicz, eds., Wiley and Sons.
4.
Drucker, D. C., Gibson, R. E., and Henkel, D. J. (1957). “Soil mechanics and work hardening theories of plasticity.” ASCE Trans., 122, 338–346.
5.
Gens, A. (1982). “Stress‐strain and strength of a low plasticity clay,” PhD Thesis, Imperial College, London Univ.
6.
Germaine, J. T., and Ladd, C. C. (1988). “Triaxial testing of saturated cohesive soils.” Advanced Triaxial Testing of Soil and Rock, R. T. Donaghe, R. C. Chaney, and M. L. Silver, eds., ASTM, Philadelphia, Pa., 421–460.
7.
Graham, J., and Houlsby, G. T. (1983). “Anisotropic elasticity of a natural clay.” Géotechnique, London, England, 33(2), 165–180.
8.
Hardin, B. O., and Drnevich, V. P. (1972). “Shear modulus and damping in soils: Design equations and curves.” J. Soil Mech. Found. Div., ASCE, 98(6), 667–692.
9.
Hashiguchi, K. (1977). “An expression of anisotropy in a plastic constitutive equation of soils.” Proc. 9th Int. Conf. on Soil Mechanics and Foundation Engineering, Tokyo, 302–305.
10.
Hashiguchi, K. (1980). “Constitutive equations of elasto‐plastic materials with anisotropic hardening and elastic‐plastic transition.” J. Appl. Mech. Trans. ASME, 48, 297–301.
11.
Hight, D. W., Gens, A., and Jardine, R. J. (1983). “Evaluation of geotechnical parameters from triaxial tests on offshore clay.” Proc. Society for Underwater Technology Conf. on Offshore Site Investigation, Society for Underwater Tech., London, 253–268.
12.
Hueckel, T. (1976). “Coupling of elastic and plastic deformations in bulk solids.” Meccanica, 4, 227–235.
13.
Hueckel, T., and Nova, R. (1979). “Some hysteresis effects of the behavior of geological media.” Int. J. of Solids and Structures, 15, 625–642.
14.
Jardine, R. J., Symes, M. J. P. R., and Burland, J. B. (1984). “The measurement of soil stiffness in the triaxial apparatus.” Géotechnique, London, England, 34(3), 323–340.
15.
Kavvadas, M. J. (1982). “Non‐linear consolidation around driven piles in clays,” ScD thesis, Massachusetts Inst. of Tech., Cambridge, Mass.
16.
Ladd, C. C., and Foott, R. (1974). “New design procedure for stability of soft clays.” J. Geotech. Engrg., ASCE, 100(7), 763–786.
17.
Leroueil, S., and Vaughn, P. R. (1990). “General and congruent effects of structure in natural soils and weak rocks.” Géotechnique, 40(3), 467–488.
18.
Mayne, P. W., and Kulhawy, F. T. (1982). “K0‐OCR relationship in soil.” J. of Geotech. Engrg., ASCE, 108(6), 851–872.
19.
Mróz, Z., Norris, V. A., and Zienkiewicz, O. C. (1978). “An anisotropic hardening model for soils and its application to cyclic loading.” Int. J. for Numerical and Analytical Methods in Geomechanics, 2, 203–221.
20.
Prévost, J. H. (1978). “Plasticity theory for soil stress‐strain behavior.” J. of Engrg. Mech., ASCE, 104(5), 1177–1194.
21.
Roscoe, K. H., and Burland, J. B. (1968). “On the generalised stress‐strain behavior of ‘wet’ clay.” Engineering Plasticity, J. Heyman and F. A. Leckie, eds., Cambridge Univ. Press, Cambridge, England, 535–609.
22.
Schofield, A. N., and Wroth, C. P. (1968). Critical state soil mechanics. McGraw‐Hill, London, England.
23.
Tavenas, F., Des Rosiers, J.‐P., Leroueil, S., La Rochelle, P., and Roy, M. (1979). “The use of strain energy as a yield and creep criterion for lightly overconsolidated clays.” Géotechnique, London, England, 29(3), 285–303.
24.
Whittle, A. J. (1987). “A constitutive model for overconsolidated clays with application to the cyclic loading of friction piles,” ScD thesis, Massachusetts Inst. of Tech., Cambridge, Mass.
25.
Whittle, A. J. (1990). “A constitutive model for overconsolidated clays.” MITSG90‐15, Massachusetts Inst. of Tech., Cambridge, Mass.
26.
Whittle, A. J. (1993). “Evaluation of a constitutive model for overconsolidated clays.” Géotechnique, London, England, 43(2), 289–313.
27.
Whittle, A. J., Degroot, D. J., Seah, T. H., and Ladd, C. C. (1994). “Model prediction of the anisotropic behavior of Boston blue clay.” J. Geotech. Engrg., ASCE, 120(1), 199–224.
Information & Authors
Information
Published In
Copyright
Copyright © 1994 American Society of Civil Engineers.
History
Received: Jun 22, 1992
Published online: Jan 1, 1994
Published in print: Jan 1994
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.