Axial Response of Tapered Piles in Cohesive Frictional Ground
Publication: Journal of Geotechnical Engineering
Volume 119, Issue 4
Abstract
This paper presents a theoretical model for the analysis of the axial response of tapered piles in cohesive frictional ground. The operating characteristics of tapered cylindrical piles are identified on the basis of experimental observations. In contrast to cylindrical piles, the side resistance of tapered piles continues to increase with the axial deformation because of the additional radial expansion of the ground caused by the tapered pile wall. A simplified theoretical model applicable to piles with small taper angles is developed for the analysis of the response of these piles. The application of the model to a field pile test indicates that it is very effective in predicting the side resistance development of tapered piles. A limited parametric study indicates that in many practical situations tapered piles offer a design option that is more economical than conventional uniform cross‐section piles.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Carter, J. P., Booker, J. R., and Yeung, S. K. (1986). “Cavity expansion in cohesive frictional soils.” Geotechnique, Lond., U.K., 36(3), 349–353.
2.
Chiu, H. K., and Dight, P. M. (1983). “Prediction of the performance of rocksocketed side‐resistance‐only piles using profiles.” Int. J. Rock Mech. Min. Sci., 20(1), 21–32.
3.
Coyle, H. M., and Reese, L. C. (1966). “Load transfer for axially loaded piles in clay.” Int. J. Soil Mech. and Found. Div., ASCE, 92(1), 1–26.
4.
Fleming, W. G. K., Weltman, A. J., Randolph, M. F., and Elson, W. K. (1985). Piling Engineering. Surrey Univ. Press, Halsted Press, N.Y.
5.
Hughes, J. M. O., Wroth, C. P., and Windle, D. (1977). “Pressuremeter tests in sands.” Geotechnique, London, U.K., 27(4), 455–477.
6.
Johnston, I. W., and Chiu, H. K. (1984). “Strength of weathered Melbourne mudstone.” J. Geotech. Engrg., ASCE, 110(7), 875–898.
7.
Johnston, I. W., and Lam, T. S. K. (1989). “Shear behaviour of regular triangular concrete/rock joints—analysis.” J. Geotech. Engrg., ASCE, 115(5), 711–727.
8.
Kodikara, J. K. (1989). “Shear behaviour of rock‐concrete joints and side resistance of piles in weak rock,” PhD thesis, Monash University, Australia.
9.
Murff, J. D. (1975). “Response of axially loaded piles.” J. Geotech. Engrg., ASCE, 101(3), 356–360.
10.
Norlund, R. L. (1963). “Bearing capacity of piles in cohesionless soils.” J. Soil Mech. and Found. Engrg. Div., ASCE, 89(3), 1–35.
11.
Pells, P. J. N., Rowe, R. K., and Turner, R. M. (1980). “An experimental investigation into side shear for socketed piles in sandstone.” Int. Conf. on Struct. Founds. on Rock, 1, 291–302.
12.
Potyondi, J. G. (1961). “Skin‐friction between various soils and construction materials.” Geotechnique, London, U.K. 11(4), 339–353.
13.
Poulos, H. G., and Davis, E. H. (1980). Pile foundation analysis and design. John Wiley and Sons, New York, N.Y.
14.
Randolph, M. F., and Wroth, C. P. (1978). “Analyses of deformation of vertically loaded piles.” J. Geotech. Engrg., ASCE, 104(12), 1465–1488.
15.
Rybnikov, A. M. (1990). “Experimental investigation of bearing capacity of boredcast‐in‐place tapered piles.” Soil Mech. and Found. Engrg., 27(2), 48–52.
16.
Seed, H. B., and Reese, L. C. (1957). “The action of soft clay on friction piles.” Trans., ASCE, 122, 731–754.
17.
Yu, H. S., and Houlsby, G. (1991). “Finite cavity expansion in dilatant soils: Part I—Loading Analysis.” Geotechnique, London, U.K., 41(2), 173–183.
18.
Zil'berberg, S. D., and Sherstnev, A. D. (1990). “Construction of compaction tapered pile foundations (from the experience of the “Valdespetsstroi” Trust).” Soil Mech. and Found. Engrg., 27(3), 96–101.
Information & Authors
Information
Published In
Copyright
Copyright © 1993 American Society of Civil Engineers.
History
Received: Oct 21, 1991
Published online: Apr 1, 1993
Published in print: Apr 1993
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.