Field Performance and Analysis of Steep Riprap
Publication: Journal of Geotechnical Engineering
Volume 118, Issue 9
Abstract
The performance of riprap with a slope on the order of 1.5:1 to 2.3:1 was evaluated at 14 different dam sites in the James Bay Territory in Northern Québec. The field investigations included gradation measurement at each site and have allowed a back analysis of the performance using the wave height experienced by the riprap since reservoir filling. The wave prediction method recommended by the U.S. Army Corps of Engineers in 1984 and the Hudson stability formula have allowed a back analysis in good agreement with the observed field performance for regular gradation riprap. For riprap containing a significant portion of fine material, the observed damage was always more severe than predicted using the median weight. The results of the study show that for steep slopes the inclusion of fine stones in the riprap is detrimental to the stability.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Ahrens, J. P. (1981). “Design of riprap revetments for protection against wave attack.” Tech. Paper No. 81‐5. U.S. Army Corps of Engineers, Coastal Engineering Research Center, Fort Belvoir, Va.
2.
Bertram, G. E. (1951). “Slope protection for earth dams.” Trans. 4th ICOLD, New Delhi, India, 1(Q.13R.26), 209–221.
3.
Burgess, J. S., and Hicks, P. H. (1966). “Riprap protection for slopes subjected to wave attack.” CERA Res. Report No. 4, Hydraulics Research Station, Wallingford, England.
4.
Donelan, M. A. (1980). “Similarity theory applied to the forecasting of wave heights, periods and directions.” Proc. Canadian Coastal Conf., National Research Council, Burlington, Canada, 47–61.
5.
Esmiol, E. E. (1967). “Rock as upstream slope protection for south dams—149 case histories.” Report No. DD‐3, U.S. Department of the Interior Bureau of Reclamation, Denver, Colo.
6.
Hoff, T., and Nilsen, K. Y. (1985). “Erosion and leakage problems on some Norwegian dams.” Trans. 15th ICOLD, Lausanne, Switzerland, IV(Q.59, R.36), 573–586.
7.
Hudson, R. Y. (1959). “Laboratory investigation of rubble‐mound breakwaters.” J. Strwy. and Harb. Div., ASCE, 85(3), 93–121.
8.
“Performance of riprap in northern climates.” (1988). Report No. 625G 571, Canadian Electrical Association, Winnipeg, Manitoba, Canada.
9.
Peters, N., and Towle, J. E. (1979). “Upstream slopes protection for earth dams in the Prairie Provinces.” Canadian Geotech. J., 16(4), 679–690.
10.
Scherman, K. A., and Nylander, S. (1970). “Suspension of dams at the Swedish State Power Board.” Trans. 10th ICOLD, III(Q.38, R.22), Montréal, Canada, 365–386.
11.
Shore protection manual. (1977). 3rd Ed., U.S. Army Corps of Engineers, Coastal Engineering Research Center, Washington, D.C.
12.
Shore protection manual. (1984). 4th Ed., U.S. Army Corps of Engineers, Coastal Engineering Research Center, Washington, D.C.
13.
Taylor, K. V. (1973). “Slope protection on earth and rockfill dams.” Trans. 11th ICOLD, III(Q.42, R.13), Madrid, Spain, 215–235.
14.
Thompson, D. M., and Shuttler, R. M. (1976). “Design of riprap slope protection against wind waves.” CIRIA Report 61, Hydraulics Research Station, Wallingford, England.
15.
Van Der Meer, J. W. (1988). “Rock slopes and gravel beaches under wave attack,” PhD thesis, Delft University of Technology, Delft, The Netherlands.
16.
“Waves in inland reservoirs.” (1962). Summary report on civil works investigation, Projects CW‐164 and CW‐165, Tech. Memorandum No. 132, Beach Erosion Board. Corps of Engineers, Washington, D.C.
Information & Authors
Information
Published In
Copyright
Copyright © 1992 ASCE.
History
Published online: Sep 1, 1992
Published in print: Sep 1992
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.