Fine Ottawa Sand: Experimental Behavior and Theoretical Predictions
Publication: Journal of Geotechnical Engineering
Volume 118, Issue 12
Abstract
Results from a comprehensive experimental program on both loose and dense fine Ottawa silica sand subjected to generalized monotonic loading are presented. The experimental program was conducted on both solid and hollow cylinder specimens, using a new hollow cylinder apparatus, and includes isotropic, triaxial compression, triaxial extension, simple shear, axial/torsional, and other combined tests at various stress levels. This paper presents part of the results with the emphasis placed on generalized failure and yield criteria. The results are compared with predictions using Lade's single‐hardening constitutive model for factional materials based on nonassociated flow plasticity. The comparisons show good agreement between experimental data and model predictions for the failure surfaces for both loose and dense sand. Moreover, very good agreement is shown between experimental data and simulation results for the isotropic, triaxial compression, triaxial extension, and simple shear tests examined.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Bardet, J. P. (1986), “Bounding surface plasticity model for sands.” J. Engrg. Mech., ASCE, 112(11), 1198–1217.
2.
Dafalias, Y., and Herrmann, L. (1982). “Bounding surface formulations of soil plasticity.” Soil mechanics—Transient and cyclic loads, G. Pande and O. Zienkiewicz, eds., J. Wiley, London, England, 253–282.
3.
DiMaggio, F. L., and Sandler, I. S. (1971). “Material model for granular solids.” J. Engrg. Mech., ASCE, 97(3), 935–950.
4.
Frantziskonis, G., Desai, F., and Somasundaram, S. (1986). “Constitutive modeling for non‐associative behavior.” J. Engrg. Mech., ASCE, 112(9), 932–946.
5.
Ghaboussi, J., and Momen, H. (1982). “Modeling and analysis of cyclic behavior of sands.” Soil mechanics—Transient and cyclic loads, G. Pande and O. Zienkiewicz, eds., J. Wiley, London, England, 313–342.
6.
Hammer, M. (1986). “The membrane penetration effect on pore water pressures measured in sands during cyclic triaxial tests,” MS thesis, Rensselaer Polytech. Inst., Troy, N.Y.
7.
Hight, D., Gens, A., and Symes, M. (1983). “The development of a new hollow cylinder apparatus for investigating the effects of principal stress rotation in soils.” Geotechnique, 33(4), 352–383.
8.
Kim, M. K., and Lade, P. V. (1988). “Single hardening constitutive model for rictional materials. I. Plastic potential function.” Comput. Geotech., 5(4), 307–324.
9.
Ladd, R. S. (1978). “Preparing testing specimens using undercompaction.” Geotech. Test. J., 1(1), 16–23.
10.
Lade, P. (1977). “Elasto‐plastic stress‐strain theory for cohesionless soil with curved yield surfaces.” Int. J. Solids Struct., 13, 1014–1035.
11.
Lade, P. (1990). “Single‐hardening model with application to NC clay.” J. Geotech. Engrg., ASCE, 116(3), 394–414.
12.
Lade, P. V., and Kim, M. K. (1988a). “Single hardening constitutive model for frictional materials. II. Yield criterion and plastic work contours.” Comput. Geotech., 6(1), 13–29.
13.
Lade, P. V., and Kim, M. (1988b). “Single hardening constitutive model for frictional materials. III. Comparisons with experimental data.” Comput. Geotech., 6(1), 31–47.
14.
Lade, P. V., and Nelson, R. (1987). “Modelling the elastic behavior of granular materials.” Int. J. Numer. Anal. Methods, 11(2), 521–542.
15.
Mróz, Z., Norris, V., and Zienkiewicz, O. (1981). “An anisotropic critical state model for solids subject to cyclic loading.” Geotechnique, 31(4), 451–469.
16.
Poorooshasb, H. B., and Pietruszczak, S. (1982). “On yielding and flow of sand; A generalized two‐surface model.” Comput. Geotech., 1(1), 33–58.
17.
Prevost, J. H. (1978). “Plasticity theory for soil stress‐strain behavior.” J. Engrg. Mech., ASCE, 104(5), 1177–1194.
18.
Saada, A. (1988). “State of the art: Hollow cylinder torsional devices: Their advantages and limitations.” Advanced triaxial testing of soil and rock, ASTM STP977, Robert T. Donaghe, Ronald C. Chaney, and Marshall L. Silver, eds., ASTM, Philadelphia, Pa. 766–795.
19.
Saada, A., and Townsend, F. (1981). “State of the art: Laboratory strength testing of soils.” Laboratory shear strength of soil, ASTM STP 740, R. Yong and F. Townsend, eds., ASTM, Philadelphia, Pa. 7–77.
20.
Sun, Y., and Dakoulas, P. (1991). “Experimental investigation for constitutive modeling of cohesionless soil under cyclic loading using hollow cylinder specimens.” Geotech. Engrg. Engrg. Report 1991‐2, Rice Univ., Houston, Tex.
21.
Tatsuoka, F. (1988). “State of the art: Some recent developments in triaxial testing systems for cohesionless soils.” Advanced triaxial testing of soil and rock, ASTM STP 977, Robert T. Donaghe, Ronald C. Chaney, and Marshall L. Silver, eds., ASTM, Philadelphia, Pa. 7–67.
22.
Wang, Z.‐L., and Dafalias, Y. F. (1990). “Bounding surface hypoplasticity model for sand.” J. Engrg. Mech., ASCE, 116(5), 989–1001.
Information & Authors
Information
Published In
Copyright
Copyright © 1992 ASCE.
History
Published online: Dec 1, 1992
Published in print: Dec 1992
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.