Design of Socketed Drilled Shafts in Limestone
Publication: Journal of Geotechnical Engineering
Volume 118, Issue 10
Abstract
Increased usage of drilled shafts to carry high‐foundation loads has resulted in the common practice to socket the shafts into bedrock to transmit these loads. However, end‐bearing uncertainties have lead various designers to rely solely upon skin friction within the sockets to transmit the loads. This paper reviews several design techniques/correlations to estimate rock/shaft friction values from lab tests. These methods rely upon: (1) Unconfined compression and (2) split tensile tests on recovered rock cores to estimate the rock shear transfer values. A database of 14 field‐load tests compares the measured versus estimated rock shear values for the various methods, and suggests that a two‐parameter model tests) provides the best estimate or socket friction. A small‐scale field “pull‐out” test on grout anchors is suggested as an alternative method for estimating rock/shaft friction values.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Carter, J. P., and Kulhawy, F. H. (1988). “Analysis and design of drilled shaft foundations socketed into rock,” EPRI Report El‐5918, Electric Power Res. Inst., Palo Alto, Calif.
2.
Crapps, D. K. (1986). “Design, construction and inspection of drilled shafts in limerock and limestone.” Proc. Annual Meeting of Florida Section, ASCE.
3.
Gupton, C, and Logan, T. (1984). “Design guidelines for drilled shafts in weak rocks of south Florida.” Proc. South Florida Annual ASCE Meeting, ASCE.
4.
Hobbs, N. B., and Healy, P. R. (1979). “Piling in chalk.” Construction Industry Research and Information Association, London, United Kingdom.
5.
Horvath, R. G., and Kenney, T. C. (1979). “Shaft resistance of rock‐socketed drilled piers,” Proc. Symp. on Deep Foundation, ASCE.
6.
Jaeger, J. C, and Cook, N. G. (1969). Fundamentals of rock mechanics. Chapman and Hall Ltd. and Science Paperbacks, London, United Kingdom.
7.
McMahan, B. (1988). Drilled shaft design and construction in Florida. Dept. of Civ. Engrg., Univ. of Florida, Gainesville, Fla.
8.
Reese, L. C, and O'Neill, M. W. (1987). “Drilled shafts: construction procedures and design methods.” Design manual, U.S. Department of Transportation, Federal Highway Administration, McLean, Va.
9.
Reynolds, R. T., and Kaderabek, T. J. (1980). “Miami limestone foundation design and construction.” ASCE, New York, N.Y.
10.
Rowe, R. K., and Armitage, H. H. (1987). “A design method for drilled piers in soft rock.” Can. Geotech. J., 24(1), 126–142.
11.
Schmertmann, J. H. (1977). “Report on the development of a limerock tension shear test to guide drilled shaft foundation design of the Florida DOT Keys bridges project.” Final Report to FDOT, Florida Department of Transportation, Tallahassee, Fla.
12.
Smith, G. N. (1986). Probability and statistics in civil engineering. Nichols Publishing Company, New York, N.Y. 91–98.
13.
Williams, A. F., Johnston, I. W., and Donald, I. B. (1980). “The design of socketed piles in weak rock.” Proc. Int. Conf. on Struct. Foundations in Rock, A.A. Balkema Publishers, Netherlands, 327–347.
Information & Authors
Information
Published In
Copyright
Copyright © 1992 ASCE.
History
Published online: Oct 1, 1992
Published in print: Oct 1992
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.