Use of Short‐Period Microtremors for Profiling
Publication: Journal of Geotechnical Engineering
Volume 118, Issue 10
Abstract
A possible use of short‐period microtremors is examined for the determination of shallow shear wave velocity profiles. Presented for this purpose is a hybrid version of Rayleigh wave methods, in which vertical ground‐surface motions of either microtremors or forced vibrations are measured using an expanding circular array of six vertical sensors. Based on high‐resolution frequency‐wave number spectrum analysis of these data, Rayleigh wave dispersion curves can be determined. Microtremors cover the characteristics in a low‐frequency range, while forced vibrations cover them in a high‐frequency range. An inverse process that takes into account the effects of multiple Rayleigh modes on the measured dispersion data enables one to estimate profiles from the ground surface to depths more than 50 m. The profiles inferred by the proposed method are compared with those obtained by the conventional down‐hole method. The profiles from the two methods are in fairly good agreement, indicating that the use of short‐period microtremors is promising as an economical means of profiling.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Abbiss, C. P., and Ashby, K. D. (1983). “Determination of ground moduli by a seismic noise technique on land and on the sea bed.” Geotechnique, 33(3), 445–450.
2.
Aki, K. (1957). “Space and time spectra of stationary stochastic waves, with special reference to microtremors.” Bull. Earthquake Res. Inst., 38(3), 415–456.
3.
Asten, M. W., and Henstridge, J. D. (1984). “Array estimator and the use of microseisms for reconnaissance of sedimentary basins.” Geophysics, 49(11), 1828—1837.
4.
Barker, T. G., and Stevens, J. L. (1991). “Array processing of Rayleigh waves for shear structure.” Proc. of the 2nd Int. Conf. on Recent Advances in Geotechnical Earthquake Engineering and Soil Dynamics, Univ. of Missouri, Rolla, Mo., 2, 1393–1397.
5.
Capon, J. (1969). “High‐resolution frequency‐wavenumber spectrum analysis.” Proc. IEEE, 57(8), 1408–1418.
6.
Dorman, J., and Ewing, M. (1962). “Numerical inversion of seismic surface wave dispersion data and crust‐mantle structure in the New York‐Pennsylvania area,” J. Geophys. Res., 67(13), 5227–5241.
7.
Gabriels, P., Snieder, R., and Nolet, G. (1987). “In situ measurements of shear‐wave velocity in sediments with higher‐mode Rayleigh waves.” Geophys. Prospect, 35(2), 187–196.
8.
Gucunski, N., and Wood, R. D. (1991). “Use of Rayleigh modes in interpretation of SASW test.” Proc. of the 2nd Int. Conf. on Recent Advances in Geotechnical Earthquake Engineering and Soil Dynamics, Univ. of Missouri, Rolla, Mo., 2, 1399–1408.
9.
Harkrider, D. G. (1964). “Surface waves in multilayered elastic media I. Rayleigh and Love waves from buried sources in a multilayered elastic half‐space.” Bull. Seismol. Soc. Am., 54(2), 627–679.
10.
Haskell, N. A. (1953). “The dispersion of surface waves on multilayered media.” Bull. Seismol. Soc. Am., 43(1), 17–34.
11.
Horike, M. (1985). “Inversion of phase velocity of long‐period microtremors to the S‐wave‐velocity structure down to the basement in urbanized area.” J. Phys. Earth, 33(2), 59–96.
12.
Jones, R. B. (1958). “In‐situ measurement of the dynamic properties of soil by vibration methods.” Geotechnique, 8(1), 1–21.
13.
Kayen, R. E., Liu, H. P., Fumal, T. E., Westerlund, R. E., Warrick, R. E., Gibbs, J. F., and Lee, H. J. (1990). “Effects of the Loma Prieta earthquake on the Marina District San Francisco, California, Chapter G: Engineering and seismic properties of the soil column at Winfield Scott School, San Francisco.” Open File Report 90‐253, U.S. Geological Survey, Menlo Park, Calif.
14.
Lacoss, R. T., Kelly, E. J., and Toksöz, M. N. (1969). “Estimation of seismic noise structure using arrays.” Geophysics, 34(1), 21–28.
15.
Liaw, A. L., and McEvilly, T. V. (1979). “Microseisms in geothermal exploration—studies in Grass Valley, Nevada.” Geophysics, 44(6), 1097–1115.
16.
Nazarian, S., and Stokoe, K. H., II (1984). “In situ shear wave velocity from spectral analysis of surface waves.” Proc. of the 8th World Conf. on Earthquake Engineering, 3, 31–38.
17.
Okada, H., and Matsushima, T. (1986). “Estimation of underground structures down to a depth more than several hundreds of meters using long‐period microtremors.” Proc. of the 7th Japan Earthquake Engineering Symp., Science Council of Japan, 211–216 (in Japanese).
18.
Stokoe, K. H., II, Nazarian, S., Rix, G. J., Sanchez‐Salinero, I., Sheu, J. C., and Mok, Y. J. (1988). “In situ seismic testing of hard‐to‐sample soils by surface wave method.” Earthquake Engineering and Soil Dynamics II—Recent Advances in Ground Motion Evaluation, Geotechnical Special Publication No. 20, ASCE, New York, N.Y., 264–278.
19.
Tokimatsu, K., Kuwayama, S., Tamura, S., and Miyadera, Y. (1991). “ determination from steady state Rayleigh wave method.” Soils Found., 31(2), 153–163.
20.
Tokimatsu, K., Tamura, S., and Kojima, H. (1992). “Effects of multiple modes on Rayleigh wave dispersion.” J. Geotech. Engrg., ASCE, 118(10), 1529–1543.
21.
Toksöz, M. N. (1964). “Microseisms and an attempted application to exploration.” Geophysics, 29(2), 154–177.
Information & Authors
Information
Published In
Copyright
Copyright © 1992 ASCE.
History
Published online: Oct 1, 1992
Published in print: Oct 1992
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.