Free Boundary, Fluid Flow, and Seepage Forces in Excavations
Publication: Journal of Geotechnical Engineering
Volume 118, Issue 1
Abstract
The role of pore fluids in predicting the strength and deformation behavior of excavations is investigated in the context of nonlinear finite element analysis. It is shown that the imposition of a volume constraint exerts a significant influence on the structural response of excavations during construction. For a fully undrained condition, the constraint is viewed as that of incompressibility; for a fully drained condition under steady‐state seepage, the volume constraint vanishes, but fluid flow gives rise to seepage forces that alter the mode of deformation of unsupported and braced cuts. Predictions of drained responses of unsupported and braced excavations are made using a program called DIG‐DIRT, a nonlinear finite element code capable of dealing with free‐surface flow and seepage forces for solid stress and deformation calculations. The same code is used to predict the undrained response of excavations from equivalent formulations based on mixed and penalty methods with selective reduced integration to deal effectively with the incompressibility constraint. Examples of drained and undrained response predictions are then discussed to obtain a better understanding of the role of pore fluids on the strength and deformation behavior of excavations.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Alt, H. W. (1980r). “Numerical solution of steady‐state porous flow free boundary problems.” Numer. Math., 36(1), 73–98.
2.
Baiocchi, C. (1972). “Su un problema di frontiera libera connesso a questioni didraulica.” Annali di Matematica Pura ed Applicata, Bologna, Italy, 92, 107–127 (in Italian).
3.
Baiocchi, C, and Capelo, A. (1984). Variational and quasivariational inequalities, applications to free boundary problems. John Wiley and Sons, New York, N. Y.
4.
Bathe, K. J., and Khoshgoftaar, M. R. (1979). “Finite element free surface seepage nalysis without mesh iteration.” Int. J. Numer. Anal. Methods Geomech., 3(1), 13–22.
5.
Bear, J. (1972). Dynamics of fluids in porous media. Elsevier, New York, N. Y.
6.
Bonaparte, R., and Mitchell, J. K. (1979). “The properties of San Francisco Bay mud at Hamilton Air Force Base, California.” Geotech. Res. Report, Univ. of California, Berkeley, Calif.
7.
Borja, R. I. (1989). “Linearization of elasto‐plastic consolidation equations.” Engrg. Computations, 6(2), 163–168.
8.
Borja, R. I. (1990). “Analysis of incremental excavation based on critical state theory.” J. Geotech. Engrg., ASCE, 116(6), 964–985.
9.
Borja, R. I. (1991a). “Cam‐clay plasticity, Part II: Implicit integration of constitutive equation based on a nonlinear elastic stress predictor.” Comput. Methods Appl. Mech. Engrg., 88(2), 225–240.
10.
Borja, R. I. (1991b). “Composite Newton‐PCG and quasi‐Newton iterations for nonlinear consolidation.” Comput. Methods Appl. Mech. Engrg., 86(1), 27–60.
11.
Borja, R. I. (1991c). “Modeling the monotonic and cyclic viscoplastic soil behavior.” Proc. 2nd Int. Conf. Recent Advances Geotech. Earthquake Engrg. Soil Dynamics, S. Prakash, ed., St. Louis, Mo., 1, 37–40.
12.
Borja, R. I. (1991d). “Nonlinear consolidation: Linear multistep methods and iterative algorithms.” Proc. 7th Int. Conf. Comput. Methods Advances in Geomech., G. Beer, J. R. Booker, and J. P. Carter, eds., A. A. Balkema, Rotterdam, the Netherlands, 1111–1116.
13.
Borja, R. I. (1991e). “One‐step and linear multistep methods for nonlinear consolidation.” Comput. Methods Appl. Mech. Engrg., 85(3), 239–272.
14.
Borja, R. I., and Dreiss, S. J. (1989). “Numerical modeling of accretionary wedge mechanics: Application to the Barbados subduction problem.” J. Geophys. Res., 94(B7), 9323–9339.
15.
Borja, R. I., and Kishnani, S. S. (1991). “On the solution of elliptic free‐boundary problems via Newton's method.” Comput. Methods Appl. Mech. Engrg., 88(3), 341–361.
16.
Borja, R. I., and Lee, S. R. (1990). “Cam‐clay plasticity, Part I: Implicit integration of elasto‐plastic constitutive relations.” Comput. Methods Appl. Mech. Engrg., 78(1), 49–72.
17.
Borja, R. I., Lee, S. R., and Seed, R. B. (1989a). “Excavation in cohesive soils: Modelling the effects of creep on long‐term performance.” Numerical Models in Geomechanics, NUMOGIII, S. Pietruzczak and G. N. Pande, eds., Elsevier, New York, N. Y., 585–592.
18.
Borja, R. I., Lee, S. R., and Seed, R. B. (1989b). “Numerical simulation of excavation in elastoplastic soils.” Int. I. Numer. Anal. Methods Geomech., 13(3), 231–249.
19.
Borja, R. I., Hsieh, H. S., and Kavazanjian, E., Jr. (1990). “Double‐yield‐surface model. II: Implementation and verification.” J. Geotech. Engrg., ASCE, 116(9), 1402–1421.
20.
Brezis, H., Kinderlehrer, D., and Stampacchia, G. (1978). “Sur une nouvelle formulation due probleme de l'ecoulement a travers une digue.” C. R. Acad. Sci., Paris, France, 287(ser A), 711–714 (in French).
21.
Brown, P. T., and Booker, J. R. (1986). “Finite element analysis of excavations.” Res. Report No. 532, School of Civ. and Mining Engrg., Univ. of Sydney, Sydney, Australia.
22.
Christian, J. T., and Wong, I. H. (1973). “Errors in simulation of excavation in elastic media by finite elements.” Soils Found., 13(1), 1–10.
23.
Clough, G. W., and Reed, M. W. (1984). “Measured behavior of braced wall in very soft clay.” J. Geotech. Engrg., ASCE, 110(1), 1–19.
24.
Desai, C. S., and Li, G. C. (1983). “A residual flow procedure and application for free surface flow in porous media.” Adv. Water Res., 6(1), 27–35.
25.
Friedman, A. (1982). Variational principles and free‐boundary problems. John Wiley and Sons, New York, N. Y.
26.
Ghaboussi, J., and Pecknold, D. A. (1984). “Incremental finite element analysis of geometrically altered structures.” Int. J. Numer. Methods Engrg., 20(11), 2051–2064.
27.
Hsieh, H. S., Kavazanjian, E., Jr., and Borja, R. I. (1990). “Double‐yield‐surface Cam‐clay plasticity model. I: Theory.” J. Geotech. Engrg., ASCE, 116(9), 1381–1401.
28.
Hughes, T. J. R. (1980). “Generalization of selective integration procedures to anisotropic and nonlinear media.” Int. J. Numer. Methods Engrg., 15(9), 1413–1418.
29.
Hughes, T. J. R. (1987). The finite element method: Linear static and dynamic analysis. Prentice‐Hall, Englewood Cliffs, N. J.
30.
Ishihara, K. (1970). “Relations between process of cutting and uniqueness of solutions.” Soils Found., 10(3), 50–65.
31.
Kosloff, D., and Frazier, G. A. (1978). “Treatment of hourglass patterns in low‐order finite element codes.” Int. J. Numer. Anal. Methods Geomech., 2(1), 57–72.
32.
Lacy, S. J., and Prevost, J. H. (1987). “Flow through porous media: A procedure for locating the free surface.” Int. J. Numer. Anal. Methods Geomech., 11(6), 585–601.
33.
Lee, S. R., Borja, R. I., and Seed, R. B. (1989). “Nonlinear finite element analysis of braced excavations in clays.” Geotech. Engrg. Res. Report No. 1, Stanford Univ., Stanford, Calif.
34.
Neuman, S. P., and Witherspoon, P. A. (1970). “Finite element method of analyzing steady seepage with a free surface.” Water Resour. Res., 6(3), 889–897.
35.
Oden, J. T., and Carey, G. F. (1984). Finite elements: Mathematical aspects. 4, Prentice‐Hall, Englewood Cliffs, N. J.
36.
Oden, J. T., and Kikuchi, N. (1984). “Recent advances: Theory of variational inequalities with applications to problems of flow through porous media.” Int. J. Engrg. Sci., 18(10), 1173–1284.
37.
Ortega, J. M., and Rheinboldt, W. C. (1970). Iterative solution of nonlinear equations in several variables, Academic Press Inc., San Diego, Calif.
38.
Simo, J. C., and Taylor, R. L. (1985). “Consistent tangent operators for rate‐independent elastoplasticity.” Comput. Methods Appl. Mech. Engrg., 48(1), 101–118.
39.
Taylor, R. L., and Brown, C. B. (1967). “Darcy flow solutions with a free surface.” J. Hydr. Div., ASCE, 93(2), 25–33.
40.
Westbrook, D. R. (1985). “Analysis of inequalities and residual flow procedures and an iterative scheme for free surface seepage.” Int. J. Numer. Methods Engrg., 21(10), 1791–1802.
Information & Authors
Information
Published In
Journal of Geotechnical Engineering
Volume 118 • Issue 1 • January 1992
Pages: 125 - 146
Copyright
Copyright © 1992 ASCE.
History
Published online: Jan 1, 1992
Published in print: Jan 1992
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.