Analytical Prediction of Earthquake‐Induced Permanent Deformations
Publication: Journal of Geotechnical Engineering
Volume 117, Issue 10
Abstract
A general method is presented for the prediction of earthquake‐induced permanent deformations of foundations resting on sand. Predictions arebased upon experimental results from common static and cyclic tests; they may take into account various boundary and drainage conditions and require reduced computational effort. The method uses and further develops previous work aimed at the prediction of permanent drift of offshore foundations due to the action of ocean waves. The basic concepts of the method are presented in detail, with emphasis placed upon the introduced improvements and modifications. The versatility of the constitutive laws used to describe permanent strain accumulation in the sand is demonstrated through comparison with data from cyclic laboratory tests. The overall accuracy of the method is evaluated on the basis of actual field observations and experimental measurements.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Andersen, G. R., Whitman, R. V., and Germaine, J. T. (1987). “Tilting response of centrifuge‐modelled gravity retaining wall to seismic shaking.” Research Report R87‐14, Dept. of Civil Engineering, Massachusetts Institute of Technology, Cambridge, Mass., Jun.
2.
Biot, M. A. (1956). “General solutions of equations of the elasticity and consolidation for a porous material.” J. Appl. Mech. Trans.ASME, 78, 91–96.
3.
Booker, J. R., and Small, J. C. (1975). “An investigation of the stability of Biot's equations of consolidation.” Int. J. Solids Struct., ii, 907–917.
4.
Bouckovalas, G., Marr, W. A., and Christian, J. T. (1986). “Analyzing permanent drift due to cyclic loads.” J. Geotech. Engrg., ASCE, 112(7), 579–593.
5.
Bouckovalas, G., and Madshus, C. (1987). “Accumulation of pore pressure under partly drained cyclic loading of soils.” Proc. Sixth Int. Offshore Mechanics and Arctic Engineering Symp., Mar., I., 365–371.
6.
Bouckovalas, G., Stamatopoulos, C., and Whitman, R. V. (1991). “Analysis of seismic settlements and pore pressures in centrifuge tests.” J. Geotech. Engrg., ASCE, 117(10), 000–000.
7.
Bucknam, M. D. (1982). “Triaxial testing of Leighton‐Buzzard 120/200 sand.” Thesis presented to the Massachusetts Institute of Technology, at Cambridge, Mass., in partial fulfillment of the requirements of the degree of Master of Science.
8.
Change, C. S., and Whitman, R. V. (1988). “Drained permanent deformation of sand due to cyclic loading.” J. Geotech. Engrg., ASCE, 114(10), 1164–1180.
9.
Duncan, J. M., and Chang, C. Y. (1970). “Nonlinear analysis of stress and strain in soils.” J. Soil Mech. Found. Div., ASCE, 96(5), 1629–1653.
10.
Finn, W. D. L. (1981). “Liquefaction potential: Developments since 1976.” Int. Conf. on Recent Advances in Geotech. Engineering and Soil Dynamics, Apr., I., 655–681.
11.
Gately, S. E., Whitman, R. V., and Germaine J. (1985). “Cyclic triaxial testing of Leighton‐Buzzard 120/200 sand.” Research Report R85‐13, Dept. of Civil Engineering, Massachusetts Institute of Technology, Cambridge, Mass., Nov.
12.
Hadge, W. E., and Marr, W. A. (1979). “A relationship between the drained and the undrained behavior of sand.” Research Report R79‐23, Dept. of Civil Engineering, Massachusetts Institute of Technology, Cambridge, Mass., Jun.
13.
Idriss, I. M., Lysmer, J., Hwang, R., and Seed, H. R. (1973). “QUAD‐4. A computer program for evaluating the seismic response of soil structures by variable damping finite element procedures.” Research Report, EERC 73‐16, College of Engineering, University of California, Berkeley, Calif.
14.
Ishihara, K., Tatsuoka, F., and Yasuda, S. (1975). “Undrained deformation and liquefaction of sand under cyclic stresses.” Soils Found., 16(1), 1–16.
15.
Martin, G. R., Fin, W. D. L., and Seed, H. B. (1975). “Fundamentals of liquefaction under cyclic loads.” J. Geotech. Engrg. Div., ASCE, 101(5), 423–438.
16.
Pahwa, A., Germaine, J. T., and Whitman, R.V. (1986). “Cyclic triaxial testing of Leighton‐Buzzard 120/200 sand.” Research Report R86‐24, Dept. of Civil Engineering, Massachusetts Institute of Technology, Cambridge, Mass., Sep.
17.
Richart, F. E. (1977). “Dynamic stress strain relations for soils, state of the art report.” Proc. Ninth Int. Conf. Soil Mechanics and Foundation Engineering, 2, Tokyo, Japan, 603–612.
18.
Seed, H. B., Lee, K. L., Idriss, I. M., and Makdisi, F. (1973). “Analysis of the slides in the San Fernando dams during the earthquake of Feb. 9, 1971.” Research Report EERC 73‐2, College of Engineering, University of California, Berkeley, Calif., Jun.
19.
Silver, M. L., and Seed, H. B. (1971). “Volume changes in sands during cyclic loading.” J. Soil Mech. Found. Engrg. Div., ASCE, Vol. 97, SM9, Sept., 1971, pp. 1171–1182.
20.
Stamatopoulos, C. A., and Whitman, R. V. (1987). “Computation of earthquake‐induced permanent deformations of foundation on liquefaction susceptible sand.” Research Report R87‐05, Dept. of Civil Engineering, Massachusetts Institute of Technology, Cambridge, Mass.
21.
Stamatopoulos, C. A. (1989). “A method predicting earthquake‐induced permanent deformations of foundations,” Thesis presented to the Massachusetts Institute of Technology, at Cambridge, Mass., in partial fulfillment of the requirements for the degree of Doctor of Philosophy.
22.
Stamatopoulos, C. A., and Whitman, R. V. (1990). “Prediction of permanent tilt of gravity retaining walls by the residual strain method.” Proc., Fourth U.S. Nat. Conf. on Earthquake Engineering, Palm Springs, Calif., Vol. 3, 683–692.
23.
Whitman, R. V., and Lambe, P. C. (1988). “Earthquake‐like shaking of a structure founded on saturated sand.” Int. Conf. in Centrifuge Testing, Laboratoire Central de Ponts et Chaussees, Paris, France, Apr.
24.
Zienkiewicz, O. C. (1977). The finite element method. 3rd Ed., McGraw‐Hill, London, U.K.
Information & Authors
Information
Published In
Copyright
Copyright © 1991 ASCE.
History
Published online: Oct 1, 1991
Published in print: Oct 1991
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.