Influence of Clods on the Hydraulic Conductivity of Compacted Clay
Publication: Journal of Geotechnical Engineering
Volume 116, Issue 8
Abstract
The hydraulic conductivity of a highly plastic, compacted clay soil is significantly influenced by the size of clods used in preparing the soil for compaction. For soil compacted dry of optimum, hydraulic conductivity is 1,000,000 times smaller when the soil is prepared from small (4.6‐mm) rather than large (19‐mm) clods. For soil compacted wet of optimum, clod size is unimportant. Large differences are seen in the hydraulic conductivity of soils compacted with standard versus modified Proctor procedures. The conclusion reached is that the fate of clods and interclod pores during soil processing and compaction controlled the hydraulic conductivity of the compacted soil. To achieve low hydraulic conductivity, it is necessary to destroy the clods and to eliminate large interclod pores either by wetting the soil to a high water content or using a large compactive effort.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Benson, C. H. (1987). “A comparison of in situ and laboratory measurements of hydraulic conductiviyt,” thesis presented to the University of Texas, at Austin, Tex., in partial fulfillment of the requirements for the degree of Master of Science.
2.
Boynton, S. S., and Daniel, D. E. (1985). “Hydraulic conductivity tests on compacted clay.” J. Geotech. Engrg., ASCE, 111(4), 465–478.
3.
Daniel, D. E. (1984). “Predicting hydraulic conductivity of clay liners.” J. Geotech. Engrg., ASCE, 110(4), 285–300.
4.
Daniel, D. E. (1987). “Earthen liners for land disposal facilities.” Geotechnical practice for waste disposal '87, R. D. Woods, ed., ASCE, New York, N.Y., 21–39.
5.
Daniel, D. E., and Trautwein, S. J. (1986). “Field permeability test for earthen liners.” Use of in situ tests in geotechnical engineering, S. P. Clemence, ed., ASCE, New York, N.Y., 145–160.
6.
Daniel, D. E., et al. (1988). “Interaction of earthen liner materials with industrial waste leachate.” Hazardous Waste and Hazardous Materials, 5(2), 93–108.
7.
Day, S. R., and Daniel, D. E. (1985). “Hydraulic conductivity of two prototype clay liners.” J. Geotech. Engrg., ASCE, 111(8), 957–970.
8.
Elsbury, B. R., and Sraders, G. A. (1989). “Building a better landfill liner.” Civ. Engrg. (New York), ASCE, 59(4), 57–59.
9.
Foreman, D. E., and Daniel, D. E. (1986). “Permeation of compacted clay with organic chemicals.” J. Geotech. Engrg., 112(7), 669–681.
10.
Herrmann, J. G., and Elsbury, B. R. (1987). “Influential factors in soil liner con‐stuction for waste disposal facilities.” Geotechnical practice for waste disposal '87, R. D. Woods, ed., ASCE, New York, N.Y., 522–536.
11.
Lambe, T. W. (1958). “The structure of compacted clay.” J. Soil Mech. and Found. Engrg. Div., ASCE, 84(2), 1–35.
12.
Mitchell, J. K., Hooper, D. R., and Campanella, R. G. (1965). “Permeability of compacted clay.” J. Soil Mech. and Found. Engrg. Div., ASCE, 91(4), 41–65.
13.
Olsen, H. W. (1962). “Hydraulic flow through saturated clays.” Clays Clay Miner., 9(2), 131–161.
14.
Olson, R. E., and Daniel, D. E. (1981). “Measurement of the hydraulic conductivity of fine‐grained soils.” Special Technical Publication No. 746, ASTM, Philadelphia, Pa., 18–64.
Information & Authors
Information
Published In
Copyright
Copyright © 1990 ASCE.
History
Published online: Aug 1, 1990
Published in print: Aug 1990
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.