Low‐Stress Dilation Test
Publication: Journal of Geotechnical Engineering
Volume 115, Issue 6
Abstract
A new test to measure the low‐stress dilation behavior of cohesionless soils subjected to plane strain has been developed. Very large strains (30–35%) have been applied to sand specimens while approximately maintaining the parellelopiped shape of the specimen. A small version of the apparatus designed to test sands is described. However, it should be relatively easy to construct larger devices with the potential for testing rockfill‐like materials. A model approximating the effect of initial density on dilation behavior is presented that suggests a method for defining and measuring index void ratios that are intrinsically related to dilation behavior. The ultimate constant volumetric strain void ratio for low‐stress plane strain was found to vary with the initial void ratio of the specimen. The effect of fabric anisotropy on dilation behavior has been studied and modeled. A dilation test on sand‐cement shows that contact cohesion increases the rate of dilation of a loose sand to the rate expected for an uncemented dense sand.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Fukushima, S., and Tatsuoka, F. (1984). “Strength and deformation characteristics of saturated sand at extremely low pressures.” Soils and Found., Tokyo, Japan, 24(4), 30–48.
2.
Hardin, B. O. (1985). “Strength of soils in terms of effective stress.” Proc., Richart Commemorative Lectures, ASCE, 1–78.
3.
Haruyama, M. (1969). “Effect of water content on the shear characteristics of granular soils such as Shirasu.” Soils and Found., Tokyo, Japan, 9(3), 35–57.
4.
Lambe, T. W., and Whitman, R. V. (1979). Soil mechanics, SI version. John Wiley & Sons, New York, N.Y., 132.
5.
Leslie, D. D. (1975). “Shear strength of rock fill.” Physical Properties Engineering Study No. 526, U.S. Army Corps of Engineers, Sausalito, Calif., Oct.
6.
Lo, K. Y., and Roy, M. (1973). “Response of particulate materials at high pressures.” Soils and Found., Tokyo, Japan, 13(1), 61–76.
7.
Marachi, N. D., et al. (1969). “Strength and deformation characteristics of rockfill materials.” Report TE‐69‐5, Dept. of Civ. Engrg., Univ. of California, Berkeley, Calif., Sep.
8.
Matsuoka, H. (1974). “Stress‐strain relationships of sands based on the mobilized plane.” Soils and Found., Tokyo, Japan, 14(2), 47–61.
9.
Ponce, V. M., and Bell, J. M. (1971). “Shear strength of sand at extremely low pressures.” J. Soil Mech. and Found. Div., ASCE, 97(4), 625–638.
10.
Ramamurthy, T., Kanitkar, V. K., and Prakash, K. (1974). “Behavior of coarsegrained soils under high stresses.” Indian Geotech. J., India, 4(1), 39–63.
11.
Roscoe, K. H., Schofield, M. A., and Wroth, C. P. (1958). “On the yielding of soils.” Geotechnique, London, England, 8(1), 22–53.
12.
Rowe, P. W. (1969). “The relation between shear strength of sands in triaxial compression, plane strain and direct shear.” Geotechnique, London, England, 19(1), 75–86.
13.
Tatsuoka, F., et al. (1986). “Strength and deformation characteristics of sand in plane strain compression at extremely low pressures.” Soils and Found., Tokyo, Japan, 26(1), 65–84.
14.
Tatsuoka, F., Goto, S., and Sakamoto, M. (1986). “Effects of some factors on strength and deformation characteristics of sand at low pressures.” Soils and Found., Tokyo, Japan, 26(1), 105–114.
15.
Wroth, C. P. (1984). “The interpretation of in situ soil tests.” Geotechnique, London, England, 34(4), 449–489.
Information & Authors
Information
Published In
Copyright
Copyright © 1989 ASCE.
History
Published online: Jun 1, 1989
Published in print: Jun 1989
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.