Classification of Marine Sediments
Publication: Journal of Geotechnical Engineering
Volume 115, Issue 1
Abstract
Most of the marine sediments in the continental margin are derived from terrestrial sources, but vast areas of the sea floor are covered with sediments that are unique to the ocean environment. A knowledge of the origin and composition of these sediments is very important for their classification. A new classification system is proposed for marine sediments based on the principles of soil mechanics and geology. The system can be used as an auxiliary to the unified classification system. Marine sediments are divided into three major groups: terrigenous; biogenous; and hydrogenous. Each group is then subdivided into various subgroups. The classification system incorporates new symbols, consistent with those of the unified system, for all marine sediments. A classification chart is provided, and numerous examples are cited to illustrate the application of the system.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Agarwal, S. L., Malhorta, A. K., and Banerjee, R. (1977). “Engineering properties of calcareous soils affecting the design of deep penetration piles for offshore structures.” Proc. 9th Offshore Tech. Conf., Offshore Tech. Soc., vol. 1, 503–512.
2.
Angemeer, J., Carlson, E. D., Stroud, S., and Kurzeme, M. (1975). “Pile load tests in calcareous soils conducted in 400 ft of water from semi‐submersible exploration rig.” Proc. 7th Offshore Tech. Conf., Offshore Tech. Soc., vol. 2, 657–670.
3.
Berger, W. H. (1976). “Biogenous deep sea sediments: production, preservation and interpretation.” Chemical Oceanography, vol. 5, 2nd ed., J. P. Riley and R. Chester, Ed., Academic Press, London, England, 265–338.
4.
Bischoff, J. L., and Piper, D. Z. (1979). Marine geology and oceanography of the Pacific manganese nodule province. Plenum Press, New York, N.Y.
5.
Chaney, R. C., Slonim, S. M., and Slonim, S. S. (1981). “Determination of calcium carbonate content in soils.” ASTM Special Technical Publication STP 777, Am. Soc. for Testing and Materials, Philadelphia, Pa.
6.
Datta, M., Gulhati, S. K., and Rao, G. V. (1980). “An appraisal of the existing practice of determining the axial load capacity of deep penetration piles in calcareous sands.” Proc. 12th Offshore Tech. Conf., Offshore Tech. Soc., vol. 4, 119–130.
7.
Deep Sea Drilling Program. (1969–1988). Initial reports of the Deep Sea Drilling Project. National Science Foundation, U.S. Government Printing Office, Washington, D.C.
8.
Deep Sea Drilling Project. (1979). Shipboard handbook, D/V Glomar Challenger. Scripps Inst. of Oceanography, Univ. of California, San Diego, Calif., A‐2/A‐11.
9.
Demars, K. R., and Chaney, R. C. (1981). “Geotechnical properties, behavior, and performance of calcareous soils.” ASTM Special Technical Publication STP 777, Am. Soc. of Testing and Materials, Philadelphia, Pa.
10.
Dutt, R. N., and Cheng, A. P. (1984). “Frictional response of piles in calcareous deposits.” Proc. 16th Offshore Tech. Conf., Offshore Tech. Soc., vol. 3, 527–534, Houston.
11.
Haq, B. U., and Boersma, A. (1978). Introduction to marine micropaleontology, Elsevier, New York, N.Y.
12.
Holtz, R. D., and Kovacs, W. D. (1981). An introduction to geotechnical engineering, Prentice‐Hall, Inc., Englewood, N.J.
13.
Horn, D. R., Ed. (1972). Ferromanganese deposits on the ocean floor. Lamont‐Doherty Geological Observatory, Columbia Univ., Palisades, N.Y.
14.
Kennett, J. P. (1982). Marine geology. Prentice‐Hall, Inc., Englewood, N.J.
15.
McClelland Engineers, Inc. (1980). “Geotechnical considerations for nearshore foundation design in calcareous.material.” No. NG2583/80 MR028, Naval Civil Engineering Laboratory, Port Hueneme, Calif.
16.
Mere, J. L. (1960). “Minerals on the ocean floor.” Scientific American, 203(6), 64–72.
17.
Murff, J. D. (1987). “Pile capacity in calcareous sands: state of the art.” J. Geotech. Engrg., ASCE, 113(5), 490–507.
18.
Nauroy, J. F., and Le Tirant, P. (1983). “Model tests of piles in calcareous sands.” Proc. Conf. on Geotech. Practice in Offshore Engrg., ASCE, 356–369.
19.
Newell, G. E., and Newell, R. C. (1963). Marine plankton, A practical guide. Hutchinson Educational Press, London, England.
20.
Noorany, I. (1985). “Side friction of piles in calcareous sand.” Proc. 11th Int. Conf. on Soil Mech. and Found. Engrg., Int. Soc. for Soil Mech. and Found. Engrg., vol. 4, 1611–1614.
21.
Noorany, I. (1985). “Shear strength properties of some deep‐sea pelagic sediments.” ASTM Special Technical Publication STP883, Am. Soc. for Testing and Materials, Philadelphia, Pa., 251–257.
22.
Jewell, R. J., Andrews, D. C., and Khorshid, M. S., Ed. (1988). “Engineering for calcareous sediments.” Proc. Int. Conf. on Calcareous Sediments, Inst. of Civ. Engrs., Australia, and Int. Soc. for Soil Mech. and Found. Engrg., vols. 1 and 2.
23.
Seibold, E., and Berger, W. H. (1982). The sea floor: an introduction to marine geology. Springer‐Verlag, W. Berlin, W. Germany.
24.
Shepard, F. P. (1963). Submarine geology. 2nd ed., Harper & Row, New York, N.Y.
25.
“The unified classification system.” (1953). Technical Memorandum No. 3‐357, U.S. Army Corps of Engineers, Vicksburg, Miss.
Information & Authors
Information
Published In
Copyright
Copyright © 1989 ASCE.
History
Published online: Jan 1, 1989
Published in print: Jan 1989
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.