Measured and Predicted Axial Response of 98 Piles
Publication: Journal of Geotechnical Engineering
Volume 114, Issue 9
Abstract
This article deals with the prediction of the response to monotonic axial loading of single piles in various soil conditions. A 98‐pile load test data base was obtained from the Mississippi State Highway Department and was used to evaluate 13 methods designed to predict the ultimate load of a pile and five methods designed to predict the settlement of a pile. The methods include SPTA/ methods, cone penetrometer methods, a pressuremeter method, and a dynamic formula method. The accuracy and precision of each method is quantified statistically, and a risk analysis is performed in order to properly assess the factor of safety. A cost analysis is also performed in order to find the factor of safety that will minimize the cost of construction plus the cost of a potential failure.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
American Petroleum Institute, (1984). “Recommended practice for planning, designing and constructing fixed offshore platforms.” API RP2A, 15th Ed., American Petroleum Institute.
2.
Baguelin, F., Frank, R., and Jezequel, J. F. (1982). “Parameters for friction piles in marine soils.” Proc., Second Int. Conf. on Numerical Methods in Offshore Piling.
3.
Breen, J. E. (1986). “The Code of the West.” 11th Annual Joe J. King Professional Engineering Achievement Award Lecture, College of Engineering, University of Texas at Austin, Austin, Tex.
4.
Briaud, J. L. (1986). “Pressuremeter and foundation design.” Use of in situ testing in geotechnical engineering, ASCE Specialty Conference, Blacksburg, Va.
5.
Briaud, J. L., and Tucker. (1984). “Piles in sand: a method including residual stresses.” J. Geotech. Engrg., ASCE, 110(11), 1666–1680.
6.
Briaud, J. L., Tucker, L. M., and Douglas, B. (1984). “Pressuremeter, cone penetrometer and foundation design.” Short course notes, Vol. 2.
7.
Briaud, J. L., et al. (1986). “Development of an improved pile design procedure for single piles in clays and sands.” Research Report 4981‐1 to the Mississippi State Highway Department, Civil Engineering, Texas A&M University, College Station, Tex.
8.
Bustamante, M., and Gianeselli, L. (1982). “Prevision de la capacite portante des pieux par la methode pressiometrique.” Laboratoire Central des Ponts et Chaussees (in French).
9.
Bustamante, M., and Gianeselli, L. (1983). “Prevision de la capacite portante des pieux par la methode penetrometrique.” Compte Rendu de Recherche F.A.E.R. 1.05.02.2, Laboratoire Central des Ponts et Chaussees (in French).
10.
Clisby, B. M., et al. (1978). “An Evaluation of pile bearing capacities.” Research Report to the Mississippi State Highway Department, Civil Engineering, Mississippi State University, State College, Miss.
11.
Coyle, H. M., and Castello, R. (1981). “New design correlations for piles in sand.” J. Geotech. Engrg. Div., ASCE, 107(GT7), 965–986.
12.
Coyle, H. M., and Reese, L. C. (1966). “Load transfer for axially loaded piles in clay.” J. Soil Mech. Found. Div., ASCE, 92(SM2).
13.
De Ruiter, J., and Beringen, F. L. (1979). “Pile foundations for large North Sea structures.” Marine Geotech., 3(3).
14.
Meyerhof, G. G. (1976). “Bearing capacity and settlement of pile foundations.” J. Geotech. Engrg. Div., ASCE, 102(GT3), 195.
15.
Mississippi State Highway Department. (1972). Soil design manual. Mississippi State Highway Department.
16.
Peck, R. B., Hanson, W. E., and Thornbun, T. H. (1974). Foundation engineering. 2nd Ed., John Wiley & Sons, New York, N.Y.
17.
Roctest, Inc. (1983). TEXAM operation manual. Roctest, Inc. Plattsburg, N.Y.
18.
Schmertmann, J. H. (1978). “Guidelines for cone penetration test: performance and design. FHWA‐TS‐209, U.S. Department of Transportation, Federal Highway Administration, Washington, D.C.
19.
Tumay, M. T., and Fakhroo, M. (1981). “Pile capacity in soft clays using QCPT data.” Cone penetration testing and experience. ASCE, St. Louis Convention.
20.
Verbrugge, J. C. (1981). “Evaluation du tassement des pieux a partir de l'essai de penetration statique.” Revue Francaise de Geotechnique, 15, May(in French).
Information & Authors
Information
Published In
Copyright
Copyright © 1988 ASCE.
History
Published online: Sep 1, 1988
Published in print: Sep 1988
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.